MAME 0.129u1

From MAMEDEV Wiki
Revision as of 10:32, 1 July 2010 by Osso (talk | contribs) (New page: == Release Date == MAME 0.129u1 was released on 15 January 2009. == Contributors == The known contributors for this version are, in alphabetical order: * Aaron Giles * [[Andreas Nai...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Release Date

MAME 0.129u1 was released on 15 January 2009.


Contributors

The known contributors for this version are, in alphabetical order:


Specific Contributions

The known contributions for this version are, in the order specified in the whatsnew:

  • robiza provided cb2001 improvements:
    • Decoded "gfx" rom region.
  • Nathan Woods added a validity check to the 6526 CIA emulation.
  • MooglyGuy added savestate support to the games in 8080bw.c, ace.c, actfancr.c, aerofgt.c, airbustr.c, ajax.c and alpha68k.c:
    • sitv, sicv, sisv, sisv2, galxwars, galxwar2, galxwart, starw, lrescue, mlander, lrescuem, grescue, dsterth, invadpt2, invaddlx, cosmo, schaser, schasrcv, sflush, lupin3, polaris, polarisa, ballbomb, indianbt, searthin, searthia, invadrmr, spaceatt, spaceat2, sinvzen, sinvemag, tst_invd, alieninv, spceking, spcewars, astropal, spacewr3, invaderl, invader4, jspecter, jspectr2, cosmicmo, cosmicm2, superinv, invasion, darthvdr, moonbase, invrvnge, invrvnga, spclaser, laser, spcewarl, rollingc, ozmawars, ozmawar2, solfight, spaceph, yosakdon, yosakdoa, shuttlei, ace, actfancr, actfanc1, actfancj, triothep, triothej, spinlbrk, spinlbru, spinlbrj, pspikes, pspikesk, svolly91, pspikesb, spikes91, pspikesc, karatblz, karatblu, karatblj, turbofrc, aerofgt, aerofgtb, aerofgtc, sonicwi, aerfboot, aerfboo2, wbbc97, airbustr, airbustj, airbusb, ajax, typhoon, ajaxj, sstingry, kyros, kyrosj, jongbou, paddlema, timesold, timesol1, btlfield, btlfildb, skysoldr, goldmedl, goldmeda, goldmedb, skyadvnt, skyadvnu, skyadvnj, gangwars, gangwarb, sbasebal, tnexspce.
  • Nathan Woods fixed multisession bug in the Jaguar implementation.
  • MooglyGuy added savestate support to the games in ambush.c and ampoker2.c:
    • ambush, ambushv, ambusht, ampoker2, ampkr2b1, ampkr2b2, ampkr2b3, ampkr95, pkrdewin, videomat, sigmapkr, sigma2k.
  • Nathan Woods added check to debug_cpu_set_dasm_override(), because callers do not know if we are in debug mode or not.
  • Roberto Fresca provided goldstar improvements:
    • Added Kkuj Nol-i / Kkoj Noli (better romanization). It runs on a reduced/modified version of lucky8 hardware.
    • Added proper memory map, machine driver, PPI interfaces and inputs.
    • Added placeholder for the 4 undumped cmast91's PLD's
    • Removed the imperfect colors flag from lucky8 sets (colors look a bit dark, but seems properly decoded).
    • Added full inputs / DIP switches to the Cherry Master II sets.
    • Started a tedious clean-up to all driver inputs.
    • Added a new set based on Cherry Master V4. The game is supposed to boot as a Tetris game (there are Tetris graphics inside), and can be turned into Cherry Master (probably designed for countries where gambling games are/were illegal). The game is booting into Cherry Master and is working properly. Still flagged as GAME_NOT_WORKING till can figure out how to switch games.
    • Added notes about the Tetris/Cmaster game.
    • Fixed some default DIP switches.
    • Splitted the cmaster gfxdecode to cover different sets.
    • Created a new machine driver for sets without the extra bitmap.
    • Renamed the old sets cm2v841 and cm2841a to cmasterb and cmasterc respectively, since they are in fact different sets of Cherry Master I (ver.1.01).
    • Promoted cmasterb & cmasterc to working state. The last one was flagged as GAME_IMPERFECT_GRAPHICS, since reels graphics have a different decode, or simply are bad dumps.
    • Reparented some sets.
    • Switched to use pre-defined clocks (CPU, PSG, AY and OKI) for all machine drivers.
    • Changed all z80's CPU frequency to 3 MHz (Xtal/4).
  • David Haywood decoded the extra bitmap for Cherry Master I and V4 sets. Still need to figure out how is called.
  • Curt Coder fixed sloppy rendering in CDP1869 that caused occasional crashes.
  • Roberto Fresca provided improvements to Cherry 10:
    • Decrypted the program ROM.
    • Bypassed the PIC protection.
    • Hooked proper inputs & DIP switches.
    • Promoted to working state.
  • Jim Stolis provided changes to peplus driver:
    • Added wingboard (5-n-1 daughterboard) support.
    • Added E16/E17 jumper support.
    • Sound clock changed to global.
    • Removed graphics layout and replaced with generic gfx_8x8x4_planar.
    • Increased palette lengths.
    • Adjusted incorrect ROM_REGION sizes.
    • Correct color prom length definitions.
  • Angelo Salese renamed filetto.c to pcxt.c and made several improvements to the driver:
    • Merged tetriunk.c and filetto.c, and renamed tetriunk set to tetriskr.
    • Fixed inputs & gameplay quirks in tetriskr,so it's now playable.
    • Added preliminary external graphics emulation hook-up for the backgrounds in tetriskr.
    • Rearranged & cleaned up the palette initialization, now 0x000-0x1ff offsets are for the char modes and 0x200-0x2ff are for the bitmap modes.
    • Fixed color attributes bits.
    • Cleaned up and fixed colors in CGA bitmap mode for Filetto.
  • David Haywood fixed most graphic banking bugs & colors in the coinmaster driver.
  • Curt Coder converted the CDP1802 cpu core to use a state table.
  • Roberto Fresca improved Cherry Master '91:
    • Fixed memory map.
    • Added proper PPI 8255 devices.
    • Worked inputs / DIP switches from the scratch.
    • Fixed reels tilemaps visible area.
    • Fixed reels colors.
    • Removed all the flags and promoted to working status.
  • R. Belmont fixed 64-bit issue in the k053260 emulation.
  • Nathan Woods introduced a parallel 6821 PIA implementation, as a MAME device (6821new.c). Ported the Williams drivers over to use this new PIA implementation.
  • R. Belmont fixed clock used in Namco systems 12 & 23.
  • MooglyGuy added savestate support to the games in amspdwy.c, angelkds.c, appoooh.c, aquarium.c, arabian.c, and arcadecl.c:
    • amspdwy, amspdwya, angelkds, spcpostn, appoooh, robowres, robowrb, aquarium, arabian, arabiana, arcadecl, sparkz.
  • Luca Elia improved the rom loading in tenkai and clones.
  • Angelo Salese provided various improvements to the Jackpool driver:
    • Added a second screen for some extra gfxs that are displayed on it.
    • Fixed colors.
    • Preliminary implementation of the transparency pens for the graphics, might not be correct.
    • Added inputs.
    • Cleaned-up the driver.
  • Phil Bennett added save state support to the turbosub driver.
  • David Haywood and Roberto Fresca added improvements to the coinmastr.c driver:
    • Added maximum intensity to the color decode.
    • Switched pokeroul to use global memory map and eliminated the redundant one.
    • Eliminated the GAME_WRONG_COLORS flag to all games.
    • Some clean-ups.
  • Mirko Buffoni added OKIM6376 sound emulation to High Video games:
    • Removed GAME_NO_SOUND from newmcard, brasil and fashion.
    • Sound frequency may be incorrect.
  • Aaron Giles provided a major drawgfx cleanup, global removal, and feature enhancements:
    • Added built-in dirty tile tracking to the gfx_element. This removes the need for all drivers that had dynamically populated graphics to do their own dirty tracking. Tiles are marked dirty via the new function gfx_element_mark_dirty(). Any driver that needs access to the decoded data must call gfx_element_get_data() in order to ensure that the referenced tile is clean before proceeding.
    • In order to support dirty tracking, the gfx_element was enhanced to keep track of the original source pointer, so that it can go back and regenerate tiles on demand. For systems that set NULL for the region in the gfxdecode, they must use gfx_element_set_source() to specify a pointer to the raw data before drawing anything.
    • Changed allocgfx() to gfx_element_alloc(), and added parameters to specify the source data pointer, base color index, and total colors. Many drivers had to whack these values in after the fact, so this allowed for some minor additional cleanup.
    • Added a dirtyseq member to the gfx_element struct. This is incremented on each tile dirty, and can be used to sniff if something has changed.
    • Added logic in the tilemap engine to track which gfx_elements are used for a given tilemap, and automatically detect changes to the tiles so that drivers no longer have to explicitly invalidate the tilemap when tiles change. In the future, this may grow smarter to only invalidate the affected tiles, but for now it invalidates the entire tilemap.
    • Updated a number of drivers to remove their own dirty handling and leverage the new internal dirty marking.
    • Because the source data must always be present, updated the atarigen, zwackery and mystwarr graphics handing code to support this.
    • Thanks to the dirty tracking, this actually allows all gfx decoding to happen on the fly instead of all at once up front. Since there was some concern that this would cause undesirable behavior due to decoding lots of tiles on the fly, it is controlled with a compile-time constant in mame.h (PREDECODE_GFX). Set this to 1 to get the old behavior back.
    • Moved decodechar() and decodegfx() to deprecat.h. All drivers in MAME have been updated to simply mark tiles dirty and let the rendering system decode them as needed, so these functions may go away in the future.
    • Rewrote entirely the rendering code in drawgfx. This code previously used extensive recursive #includes and tricks to build, and was very difficult to understand. The new code is based off of a set of macros defined in drawgfxm.h. These new macros separate the core rendering logic from the per-pixel operation, allowing the operation to be easily "plugged" into any of the renderers. These macros are also available to any driver that wants custom rendering behavior that is similar to existing core behavior, without needing to populate the core with esoteric one-off rendering behaviors.
    • Added a set of new functions for * pdrawgfx* zoom, one for each transparency type. The old * pdrawgfx* zoom functions are still present, but now switch off the transparency type and call through to one of these new transparency-specific functions. The old functions are also now reduced to only supporting TRANSPARENCY_NONE, TRANSPARENCY_PEN, and TRANSPARENCY_PENS. All other rendering types must use the new functions.
    • All new rendering functions have extensive asserts to catch improper clipping rectangles and other common errors.
    • All new rendering functions automatically downgrade to optimized versions where appropriate. For example, calling drawgfx_transpen with an out-of-range pen automatically falls back to drawgfx_opaque. And drawgfxzoom_* with xscale=yscale=1.0 automatically falls back to drawgfx_*. And many other examples. In general, this relieves drivers from needing to make these sorts of decisions.
    • All new rendering functions have a consistent parameter order that is a bit different from the existing functions. The cliprect parameter is now specified immediately after the destination bitmap, to match the convention used throughout the rest of the system. The core parameters are followed by the scale parameters (for the zoom functions), and then followed by the priority parameters (for the pdrawgfx* functions), finally followed by any PIXEL_OP*-specific parameters (such as transparent pen, alpha, drawing tables, etc.)
    • Removed drawgfx_alpha_cache, alpha_set_level(), and the inline functions alpha_blend16() and alpha_blend32(). To render graphics with alpha, use the new * pdrawgfx* zoom_alpha functions, which take an explicit alpha value. To render tilemaps with alpha, the TILEMAP_DRAW_ALPHA option now takes an explicit alpha parameter. And to do you own alpha blending, use the alpha_blend_r16() and alpha_blend_r32() functions, which take an explicit alpha.
    • Updated a number of drivers as a result of removing the implicit alpha in the drawgfx_alpha_cache.
    • Removed drawgfx_pen_table and TRANSPARENCY_PEN_TABLE. To achieve the same effect, build your own table and pass it to [p]drawgfx[zoom]_transtable, along with a pointer to the machine->shadow_table to use for shadows. Eventually machine->shadow_table is likely to go away, and drivers will need to fetch the shadow table from the palette directly.
    • Updated a number of drivers to remove use of drawgfx_pen_table.
    • Removed TRANSPARENCY_ALPHARANGE; it was only used by the psikyosh driver, so it is now moved locally into that driver and built using the macros in drawgfxm.h.
    • Removed TRANSPARENCY_PEN_RAW; to achieve the same effect, call the new [p]drawgfx[zoom]_transpen_raw() functions. Updated drivers to make this change.
    • Removed the unused mdrawgfx* functions entirely.
    • Added new function gfx_element_set_source_clip() to specify a source clipping rectangle for any element. This replaces the nasty hacks that were being used in bnstars, ms32, namcos86, and namcos1 to achieve similar behaviors.
    • Added new function gfx_element_build_temporary() to safely build a temporary gfx_element. Updated the drivers that did this to use the new function.
    • Simplified the copyrozbitmap() functions to match the copybitmap() functions in having separate opaque and transparent versions. Also removed the 'priority' parameter which was only used by one driver and moved that logic into a custom renderer built using macros in drawgfxm.h. Updated copyrozbitmap* to use the destbitmap, cliprect parameter ordering convention as well.
    • Simplified the draw_scanline*() functions to always render opaque. Only one driver was doing otherwise, and it now does its work internally (draw_scanline is dead-simple ever since we moved rotation to the OSD code; I almost just removed it entirely).
  • Aaron Giles added a cliprect to the bitmap_t type, which describes the full bitmap.
  • Aaron Giles removed tilemap_set_pen_data_offset; unfortunately, this adds a random tile offset behind the scenes and goes against the dirty tile detection and invalidation. Updated the mainsnk, snk, and snk68 drivers to use old fashioned tile banking.
  • Aaron Giles changed zac2650 gfxdecode to use scale factors.
  • Aaron Giles added function video_assert_out_of_range_pixels() to help find the source of invalid pixels (generally out-of-range palette entries due to invalid data or sloppy calculations). Place this after each step in your rendering in a debug build to discover which code is generating improper pixels.
  • Curt Coder did some COP400 cpu core refactoring:
    • Added state table for the debugger.
    • Grouped all cpu types under a single makefile entry.
    • Removed duplicate code.
  • Curt Coder updated the CDP1802 cpu core:
    • Improved register layout.
    • Randomized register contents on initialization.
  • Atari Ace made the treatment of SOUND_xxx the same as that of CPU_xxx. That is, they are function pointers to the SND_GET_INFO routine for the sound.
  • Aaron Giles made direct (opcode) access more robust. Direct access now crawls the memory table to find its ranges, and caches them for fast access in the future. It invalidates intersecting regions when new ones are installed, and now properly handles mirrored ranges.
  • Aaron Giles changed the disassembly view to call the decrypted read routines for each opcode byte/word instead of fetching from a pointer, which prevented opcodes that crossed range boundaries from working correctly, even though they would execute correctly.
  • Roberto Fresca provided improvements to skylncr.c driver:
    • Hooked all the PPI 8255 devices.
    • Reworked the inputs based on them.
    • Fixed the reels visible area.
    • Reorganized and cleaned-up the driver (only remains to split in driver + video).
  • Aaron Giles added ROM_DEFAULT_BIOS to diehard, critcrsh, and smleague.
  • Atari Ace added static/const where appropriate, updated out-of-sync header files, and fixed some minor source confusion/abuse:
    • arm7core.[ch],segas24.[ch]: Rewrote some abuses of the HANDLER macros to use _func types instead.
    • m37710: Removed some long dead state save functions.
    • spc700: Removed the interface declarations and functions. Most of it is handled by CPU_GET_INFO, some of it was no longer implemented, and since pointerization it wasn't possible to call it externally anyhow.
    • segac2: removed the palette variables aliasing the megadrive ones and just used the megadrive ones directly.
    • snes: All the obc1_, DSP1_, DSP2_ exports were made static.
  • Tafoid added DIPs for Naratte Chu. Added DIP locations for all games in the st0016 driver.
  • Atari Ace removed the sndindex parameter from SND_START, in favor of using the device pointer or tag as appropriate.
  • Dirk Best removed several useless occurrences of "#define INLINE" in CPU and sound cores.
  • David Haywood hooked up the preliminary decryption code for Tarzan, but it is not complete.
  • Angelo Salese provided a pre-Seibu CRTC update:
    • Fixed gfx banking in goodejan/totmejan.
    • Fixed vertical scrolling in Sengoku Mahjong (check title screen).
    • Made some clean-ups in either drivers.
  • Phil Bennett updated OKIM6295 volume table to reflect actual chip behaviour. Removed "contact MAMEDEV" message.
  • Sonikos reorganized and simplified the megasys1.c inputs.


Game Support

New games added or promoted from NOT_WORKING status


New clones added


New games marked as GAME_NOT_WORKING