MAMEDEV Wiki - User contributions [en-gb]

Driver:HP300

2020-05-30T15:26:36Z

Dukzcry:

'''MAME HP 9000/370 Howto'''

'''Notes''':
* This manual applies to MAME 0.204 and later

The 9000/370 was almost identical to the 9000/360 except its 68030 processor operated at 33 MHz (instead of 25 MHz), and it offered a maximum memory configuration of 48 MB, instead of 16 MB.

The Model 375 (98574B, $20,995) came in the standard 300 Series cabinet (short) with two available DIO-II slots. Like the 345, the 375 came with a 68030 processor and 68882 coprocessor, both running at 50 MHz.

== Networking ==

See [[Driver:Apollo#Networking]]

== Software Installation ==

=== How to setup the ROMs ===

<pre>
├── dio98550
│   └── 98550a.bin
├── hp9122c
│   └── 09122-15515.bin
├── hp9k370
│   ├── 1818-4416.bin
│   ├── 1818-4417.bin
├── human_interface
│   └── 1820-4784.bin
</pre>

http://www.bitsavers.org/bits/HP/HP_9000/firmware/dio98550.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9122c.zip

http://www.bitsavers.org/pdf/hp/9000_300/firmware/9000_370.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9k380.zip

=== Installation images ===

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux9_install.iso

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux_9.1_update.iso

[https://archive.org/details/gnu-hpux9.00-v1.0 GNU toolchain and utilities]

=== How to create a new disk image file ===

* to create a new 1900 MB disk image use chdman utility from MAME package

$ chdman createhd -f -o hpuxtest.chd -s $[1900*1048576]

=== Installation guide ===

$ mame64 hp9k370 -sl2 98643 -hard hpuxtest.chd -rp . -window -mouse -uimodekey DEL -cdrom hpux9_install.iso

This will boot the installer:

[[File:hpux9_install1.png]]

Press <Enter> to continue:

[[File:hpux9_install2.png]]

Installer searching for disks:

[[File:hpux9_install3.png]]

It found our disk image:

[[File:hpux9_install4.png]]

Say 'y' to have long file names:

[[File:hpux9_install5.png]]

Press '1' to continue:

[[File:hpux9_install6.png]]

Accept the default swap setting by pressing enter:

[[File:hpux_install7.png]]

And, once again, press 'y' to continue

Installer starts creating the filesystem:

[[File:hpux9_install9.png]]

Installer extracting the minimum HP-UX system:

[[File:hpux9_install11.png]]

The installer is now asking for the update CDROM:

[[File:hpux9_install12.png]]

Enter the Menu (DEL to activate UI, then Tab to enter menu), and select 'hpux_9.1.update.iso':

[[File:hpux9_install13.png]]

[[File:hpux9_install14.png]]

Press Tab to close menu and DEL to deactivate UI mode

After that is done, the installer shows the main menu, press enter to select all filesets:

[[File:hpux9_install15.png]]

Press Enter once again to confirm that you to install these filesets:

[[File:hpux9_install16.png]]

And, 'y' to really install:

[[File:hpux9_install17.png]]

And this is the final install screen. After it finishes install, it will reboot into HP-UX from hard disk.

[[File:hpux9_install18.png]]

=== Running VUE ===

Login as root and type
$ init 3
After some time, it will start VUE session

[[File:hpux9_vue.png|591px]]

Driver:HP300

2020-05-30T15:22:08Z

Dukzcry:

'''MAME HP 9000/370 Howto'''

'''Notes''':
* This manual applies to MAME 0.204 and later

== Networking ==

See [[Driver:Apollo#Networking]]

== Software Installation ==

=== How to setup the ROMs ===

<pre>
├── dio98550
│   └── 98550a.bin
├── hp9122c
│   └── 09122-15515.bin
├── hp9k370
│   ├── 1818-4416.bin
│   ├── 1818-4417.bin
├── human_interface
│   └── 1820-4784.bin
</pre>

http://www.bitsavers.org/bits/HP/HP_9000/firmware/dio98550.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9122c.zip

http://www.bitsavers.org/pdf/hp/9000_300/firmware/9000_370.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9k380.zip

=== Installation images ===

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux9_install.iso

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux_9.1_update.iso

[https://archive.org/details/gnu-hpux9.00-v1.0 GNU toolchain and utilities]

=== How to create a new disk image file ===

* to create a new 1900 MB disk image use chdman utility from MAME package

$ chdman createhd -f -o hpuxtest.chd -s $[1900*1048576]

=== Installation guide ===

$ mame64 hp9k370 -sl2 98643 -hard hpuxtest.chd -rp . -window -mouse -uimodekey DEL -cdrom hpux9_install.iso

This will boot the installer:

[[File:hpux9_install1.png]]

Press <Enter> to continue:

[[File:hpux9_install2.png]]

Installer searching for disks:

[[File:hpux9_install3.png]]

It found our disk image:

[[File:hpux9_install4.png]]

Say 'y' to have long file names:

[[File:hpux9_install5.png]]

Press '1' to continue:

[[File:hpux9_install6.png]]

Accept the default swap setting by pressing enter:

[[File:hpux_install7.png]]

And, once again, press 'y' to continue

Installer starts creating the filesystem:

[[File:hpux9_install9.png]]

Installer extracting the minimum HP-UX system:

[[File:hpux9_install11.png]]

The installer is now asking for the update CDROM:

[[File:hpux9_install12.png]]

Enter the Menu (DEL to activate UI, then Tab to enter menu), and select 'hpux_9.1.update.iso':

[[File:hpux9_install13.png]]

[[File:hpux9_install14.png]]

Press Tab to close menu and DEL to deactivate UI mode

After that is done, the installer shows the main menu, press enter to select all filesets:

[[File:hpux9_install15.png]]

Press Enter once again to confirm that you to install these filesets:

[[File:hpux9_install16.png]]

And, 'y' to really install:

[[File:hpux9_install17.png]]

And this is the final install screen. After it finishes install, it will reboot into HP-UX from hard disk.

[[File:hpux9_install18.png]]

=== Running VUE ===

Login as root and type
$ init 3
After some time, it will start VUE session

[[File:hpux9_vue.png|591px]]

File:Hpux9 install14.png

2020-05-30T15:19:38Z

Dukzcry:

File:Hpux9 install11.png

2020-05-30T15:18:11Z

Dukzcry:

File:Hpux9 vue.png

2020-05-30T15:09:49Z

Dukzcry:

File:Hpux install7.png

2020-05-30T15:09:29Z

Dukzcry:

File:Hpux9 install18.png

2020-05-30T15:09:22Z

Dukzcry:

File:Hpux9 install17.png

2020-05-30T15:09:16Z

Dukzcry:

File:Hpux9 install16.png

2020-05-30T15:09:11Z

Dukzcry:

File:Hpux9 install15.png

2020-05-30T15:09:05Z

Dukzcry:

File:Hpux9 install13.png

2020-05-30T15:08:59Z

Dukzcry:

File:Hpux9 install12.png

2020-05-30T15:08:45Z

Dukzcry:

File:Hpux9 install9.png

2020-05-30T15:08:39Z

Dukzcry:

File:Hpux9 install6.png

2020-05-30T15:08:30Z

Dukzcry:

File:Hpux9 install5.png

2020-05-30T15:08:24Z

Dukzcry:

File:Hpux9 install4.png

2020-05-30T15:08:14Z

Dukzcry:

File:Hpux9 install3.png

2020-05-30T15:08:05Z

Dukzcry:

File:Hpux9 install2.png

2020-05-30T15:07:57Z

Dukzcry:

File:Hpux9 install1.png

2020-05-30T15:07:46Z

Dukzcry:

Driver:HP300

2020-05-30T15:05:31Z

Dukzcry:

'''MAME HP 9000/370 Howto'''

'''Notes''':
* This manual applies to MAME 0.204 and later

== Networking ==

See [[Driver:Apollo#Networking]]

== Software Installation ==

=== How to setup the ROMs ===

<pre>
├── dio98550
│   └── 98550a.bin
├── hp9122c
│   └── 09122-15515.bin
├── hp9k370
│   ├── 1818-4416.bin
│   ├── 1818-4417.bin
├── human_interface
│   └── 1820-4784.bin
</pre>

http://www.bitsavers.org/bits/HP/HP_9000/firmware/dio98550.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9122c.zip

http://www.bitsavers.org/pdf/hp/9000_300/firmware/9000_370.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9k380.zip

=== Installation images ===

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux9_install.iso

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux_9.1_update.iso

[https://archive.org/details/gnu-hpux9.00-v1.0 GNU toolchain and utilities]

=== How to create a new disk image file ===

* to create a new 1900 MB disk image use chdman utility from MAME package

$ chdman createhd -f -o hpuxtest.chd -s $[1900*1048576]

=== Installation guide ===

$ mame64 hp9k370 -sl2 98643 -hard hpuxtest.chd -rp . -window -mouse -uimodekey DEL -cdrom hpux9_install.iso

This will boot the installer:

[[File:hpux9_install1.png]]

Press <Enter> to continue:

[[File:hpux9_install2.png]]

Installer searching for disks:

[[File:hpux9_install3.png]]

It found our disk image:

[[File:hpux9_install4.png]]

Say 'y' to have long file names:

[[File:hpux9_install5.png]]

Press '1' to continue:

[[File:hpux9_install6.png]]

Accept the default swap setting by pressing enter:

[[File:hpux_install7.png]]

And, once again, press 'y' to continue:

[[File:hpux9_install8.png]]

Installer starts creating the filesystem:

[[File:hpux9_install9.png]]

Installer extracting the minimum HP-UX system:

[[File:hpux9_install11.png]]

The installer is now asking for the update CDROM:

[[File:hpux9_install12.png]]

Enter the Menu, and select 'hpux_9.1.update.iso':

[[File:hpux9_install13.png]]

After that is done, the installer shows the main menu, press enter to select all filesets:

[[File:hpux9_install15.png]]

Press Enter once again to confirm that you to install these filesets:

[[File:hpux9_install16.png]]

And, 'y' to really install:

[[File:hpux9_install17.png]]

And this is the final install screen. After it finishes install, it will reboot into HP-UX from hard disk.

[[File:hpux9_install18.png]]

Enjoy a VUE Session:

[[File:hpux9_vue.png]]

Driver:HP300

2020-05-30T15:01:08Z

Dukzcry:

Driver:HP300

2020-05-30T14:53:43Z

Dukzcry:

'''MAME HP 9000/370 Howto'''

'''Notes''':
* This manual applies to MAME 0.204 and later

== Software Installation ==

=== How to setup the ROMs ===

<pre>
├── dio98550
│   └── 98550a.bin
├── hp9122c
│   └── 09122-15515.bin
├── hp9k370
│   ├── 1818-4416.bin
│   ├── 1818-4417.bin
├── human_interface
│   └── 1820-4784.bin
</pre>

http://www.bitsavers.org/bits/HP/HP_9000/firmware/dio98550.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9122c.zip

http://www.bitsavers.org/pdf/hp/9000_300/firmware/9000_370.zip

http://www.bitsavers.org/bits/HP/HP_9000/firmware/hp9k380.zip

=== Installation images ===

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux9_install.iso

http://bitsavers.org/bits/HP/HP_9000/HPUX_9/CD/hpux_9.1_update.iso

[https://archive.org/details/gnu-hpux9.00-v1.0 GNU toolchain and utilities]

Driver:HP300

2020-05-30T14:44:21Z

Dukzcry: Created page with "'''MAME HP 9000/370 Howto''' '''Notes''': * This manual applies to MAME 0.204 and later == Software Installation == === How to setup the ROMs === <pre> ├── dio98550..."

System-Specific Setup and Information

2020-05-30T14:12:06Z

Dukzcry:

* [[Driver:4004 Nixie Clock|4004 Nixie Clock (4004clk)]]
* [[Driver:INTELLEC 4|INTELLEC® 4 (intlc44, intlc440)]]
* [[Driver:CT486|AMI 486 Clone PC (ct486)]]
* [[Driver:Amstrad|Amstrad CPC]]
* [[Driver:Apollo|Apollo workstations and servers]]
* [[Driver:HP300|HP 9000 series 300 workstations]]
* [[Driver:Apple II|Apple II personal computers]]
* [[Driver:FMTowns|Fujitsu FM-Towns personal computers]]
* [[Driver:HP_IPC|Hewlett-Packard Integral PC]]
* [[Driver:InterPro|Intergraph InterPro and InterServe workstations and servers]]
* [[Driver:MIPS|MIPS workstations and servers]]
* [[Driver:NeoGeo|Neo-Geo arcade and home hardware]]
* [[Driver:Seibu SPI|Seibu SPI]] (Senkyu/Battle Balls, Viper Phase 1, Raiden Fighters series, E-Jan High School)
* Expansion cards for IBM PC and clones: [[Driver:PGC|IBM Professional Graphics Controller]]
* Soviet systems: [[Driver:Soviet PCs|PC clones]] -- [[Driver:Soviet PDP-11s|PDP-11 clones]] -- [[Driver:Soviet terminals|Terminals]] -- [[Driver:Agat|Agat]]