Stage 1: ct486 PC driver setup for all OSes
Handy things to have include:
Step 1: Extract the hard disk images. Make a copy of one of them named after the OS you're going to install, such as win2k.chd. (For Win 95/98/ME you must use the 2GB disk only as a source!)
Step 2: Start the ct486 driver with the following minimal options: -ramsize 64M -hard1 win2k.chd (or whatever you named it).
If you are starting from clear NVRAM, you'll see this message. Press F1 to enter SETUP. If you have previously used the driver, press DEL to enter SETUP during the RAM count-up.
- Choose the first option "STANDARD CMOS SETUP" and press Enter twice, skipping the dire warning.
- Setup the date and time to current and move the cursor down to the Hard Disk C: Type.
- Press Page Up to get type 47 USER TYPE.
- Use the right arrow and number keys to change Cyln to 4161 (2GB) or 8322 (4GB), Head to 16 and Sect to 63. Do not change WPcom or Lzone.
- Select Floppy Drive A and press PAGE UP/PAGE DOWN until it's set to "1.44 MB 3 1/2".
- Press Esc and choose ADVANCED CMOS SETUP. Press Enter to skip the warning screen once again and scroll down to System Boot Up Sequence.
- Press PAGE UP/PAGE DOWN to select "A: C:" as shown
- Press Esc.
- Choose WRITE TO CMOS AND EXIT and press Enter. Confirm when it asks if you really want to.
Congrats, ct486 is now configured! Additional OS-specific instructions will follow.
Windows 2000 installation
Damn Small Linux LiveCD
OS/2 Warp 3.0
1. Get install CD from https://archive.org/details/IBMOS2Warp3Collection -- "IBM OS2 Warp 3 - Red - 8.162 - English - CDROM.zip" and extract it.
2. Create blank 500 MB hard disk image (installer will treat larger disks as empty)
chdman createhd --compression none --output os2warp3.chd --chs 1015,16,63
3. Start ct486 emulation and follow BIOS setup guide as described above, but set hard disk geometry to (1015 cylinders, 16 heads, 63 sectors).
mame ct486 -ram 16m -isa2 sblaster_16 -board3:ide:ide:1 cdrom -hard1 os2warp3.chd -cdrom os2cdrom.iso -flop1 INSTALL.DSK
4. Installer starts booting from floppy (INSTALL.DSK). Use MAME file manager to replace floppy disk image with DISK1.DSK when prompted:
5. Installer continues. Choose 'Advanced installation' and 'Accept predefined installation partition'. Change diskettes using file manager, as prompted.
6. Installer continues after reboot. Choose 'Easy installation' to sit back and relax while OS/2 installs on your computer.
7. OS/2 boots to the 'System Configuration' screen. Click OK to continue installation; do not install a printer and accept default multimedia settings.
8. Once install completes, shut down using right mouse button click on desktop (OK button does nothing). OS/2 is ready for use.
I tried to run pdos on the ct486 Driver - technically it should have everything, but the BIOS does not support LBA disks, so I failedd for now until I find a driver supporting lba mode addressing on Harddisks (or I create a nedw disk without lba).
For reference the chd converted from the vhd: PDOS Boot Harddisk
This Harddisk uses 2560 Cylinders,:16 Heads and :50 Sectors