Driver:Dempa Micom Soft Analog/Digital Intelligent Controller System: Difference between revisions

From MAMEDEV Wiki
No edit summary
 
(12 intermediate revisions by one other user not shown)
Line 20: Line 20:
** Index finger trigger '''B'''
** Index finger trigger '''B'''
** A Rapid Fire On/Off switch to the right of button
** A Rapid Fire On/Off switch to the right of button
* Analog throttle
* Analog throttle (spring-returned)
** Thumb button '''D'''
** Thumb button '''D'''
** Thumb rocker switch '''E1''' (down)/'''E2''' (up)
** Thumb rocker switch '''E1''' (down)/'''E2''' (up)
Line 28: Line 28:
** A Hold On/Off switch (enables auto-fire when A Rapid Fire is on)
** A Hold On/Off switch (enables auto-fire when A Rapid Fire is on)
** A Trigger Speed slider (adjusts '''A''' rapid fire speed)
** A Trigger Speed slider (adjusts '''A''' rapid fire speed)
** B Trigger Speed slider (adjusts '''A''' rapid fire speed)
** B Trigger Speed slider (adjusts '''B''' rapid fire speed)
** B Manual/Auto/Hold (selects between normal, rapid fire, and auto-fire modes for '''B''')
** B Manual/Auto/Hold switch (switches between normal, rapid fire, and auto-fire modes for '''B''')
** Analog/Digital Mode switch
** Analog/Digital Mode switch
* Reset button on rear panel (special modes can be enabled by holding panel buttons while pressing the reset button)
* Reset button on rear panel (special modes can be enabled by holding panel buttons while pressing the reset button)
Line 132: Line 132:
| Select || Back
| Select || Back
|-
|-
| A || Right button
| A || Right Button
|-
|-
| B || Right trigger
| B || Right Trigger
|-
|-
| C || Left button
| C || Left Button
|-
|-
| D || Left trigger
| D || Left Trigger
|-
|-
| E1 || D-pad left
| E1 || D-pad Left
|-
|-
| E2 || D-pad right
| E2 || D-pad Right
|-
|-
| A' || B
| A' || B
Line 148: Line 148:
| B' || A
| B' || A
|-
|-
| AD Stick X Analog || Left stick X
| AD Stick X Analog || Left Stick X
|-
|-
| AD Stick Y Analog || Left stick Y
| AD Stick Y Analog || Left Stick Y
|-
|-
| Padde V Analog || Right stick Y
| Throttle || Right Stick Y
|}
|}


However, this is not be the most ergonomically comfortable way to play every game.  In particular, since the throttle control was not originally automatically centring, you may want to either avoid using right-hand face buttons so the right stick can be held in position, or assign the Paddle V Analog Inc/Dec inputs (rather than the Paddle V Analog input) so the emulated control will hold its position.
This is not be the most ergonomically comfortable way to play every game.  In particular, you may want to either avoid using right-hand face buttons so the right stick can be held in position, or assign the Throttle Analog Inc/Dec inputs (rather than the Throttle Analog input) and reduce its auto-centring speed to zero in MAME’s Analog Input Adjustments menu so the emulated control will hold its position.
 
For games that use opposite direction on the throttle to accelerate and decelerate/brake, you can assign “Right Trigger Reverse or Left Trigger” to the Throttle, and use the right trigger to accelerate and the left trigger to decelerate/brake.  Remember not to assign the triggers to buttons if you’re using them to control the throttle.


== Compatible Games ==
== Compatible Games ==
Line 179: Line 181:
|-
|-
| '''Start''' || Pause or resume game, select menu items
| '''Start''' || Pause or resume game, select menu items
|}
=== Ayrton Senna’s Super Monaco GP II (Mega Drive) ===
* Connect the XE-1AP to the first controller port
* Select Analog mode and MD interface in MAME’s Machine Configuration menu (the defaults)
* The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
* This game is intended to be played with the throttle control rotated for horizontal movement – you may need to reassign it
{|
| Stick left/right || Choose track, move text entry cursor, adjust settings
|-
| Stick up || Accelerate, navigate menus, move text entry cursor
|-
| Stick down || Brake, navigate menus, move text entry cursor
|-
| Throttle || Steer
|-
| '''A''' or '''A' ''' || Shift up, select menu items
|-
| '''B''' or '''B' ''' || Shift up, exit menus
|-
| '''C''' || Shift down, select menu items
|-
| '''D''' || Shift down
|-
| '''E1''' or '''E2''' || Pit in
|-
| '''Start''' || Start, pause or resume game
|}
|}


Line 261: Line 292:
|}
|}


=== Thunder blade (PC Engine) ===
=== Thunder Blade (PC Engine) ===


* Connect the XE-1AP to the controller port using the XHE-3 adapter
* Connect the XE-1AP to the controller port using the XHE-3 adapter
Line 272: Line 303:
| Stick || Helicopter movement
| Stick || Helicopter movement
|-
|-
| '''A''' or '''A' ''' || Fire guns, adjust settings
| '''A''' or '''A' ''' || Fire cannon, adjust settings
|-
|-
| '''B''' or '''B' ''' || Fire rockets
| '''B''' or '''B' ''' || Fire missiles
|-
|-
| '''Start''' || Pause or resume game, select menu items
| '''Start''' || Pause or resume game, select menu items
|-
|-
| '''Select''' || Navigate menus, press while holding '''Start''' to reset
| '''Select''' || Navigate menus, press while holding '''Start''' to reset
|}
=== Forgotten Worlds (PC Engine Super CD-ROM²) ===
* Connect the XE-1AP to the controller port using the XHE-3 adapter
* Insert the CD-ROM² Super System Card and the Forgotten Worlds CD
* Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
* Press the '''Run''' button on the XHE-3 adapter at the Super CD-ROM² System screen to start the software (the '''Start''' button on the XE-1AP will not be recognised)
{|
| Stick || Movement, navigate menus, adjust settings
|-
| Throttle || Aim
|-
| '''A''' or '''A' ''' || Fire, purchase items in shop, skip cutscenes, select menu items, adjust settings
|-
| '''B''' or '''B' ''' || Fire, skip cutscenes
|-
| '''C''' || Purchase items in shop, skip cutscenes, select menu items, adjust settings
|-
| '''D''' || Skip cutscenes
|-
| '''Start''' || Start, pause or resume game
|-
| '''Select''' || Show or hide score/item screen when paused, navigate menus, press while holding '''Start''' to reset
|}
|}


Line 311: Line 367:
| Throttle up || Brake, navigate menus
| Throttle up || Brake, navigate menus
|-
|-
| '''Start''' || Select menu items
| '''A''', '''B''', '''A' ''', '''B' ''', '''C''', '''D''', '''E1''', '''E2''', '''Start''' or '''Select''' || Start game, select menu items
|}
 
=== Syvalion (X68000) ===
 
* Connect the XE-1AP to the first joystick port
* Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
 
{|
| Stick || Move, navigate menus
|-
| '''A''', '''A' ''', '''B''' or '''B' ''' || Fire, skip cutscenes, continue, select menu items
|}
 
=== Thunder Blade (X68000) ===
 
* Connect the XE-1AP to the first joystick port
* Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
 
{|
| Stick up/down || Rotor collective pitch (vertical movement), navigate menus
|-
| Stick left/right || Rotor cyclic pitch (horizontal movement)
|-
| Throttle || Speed
|-
| '''A''' or '''A' ''' || Fire cannon, start game, select menu items, adjust settings
|-
| '''B''' or '''B' ''' || Fire missiles, start game, select menu items, adjust settings
|-
| '''Start''' || Start game
|-
| '''Select''' || Options menu
|}
|}


Line 334: Line 422:
|}
|}


=== Chase HQ (FM Towns) ===
=== Taito Chase H.Q. (FM Towns) ===


* Connect the XE-1AP to the second controller port
* Connect the XE-1AP to the second controller port
Line 375: Line 463:
| '''Start''' || Pause or resume game, dismiss input test
| '''Start''' || Pause or resume game, dismiss input test
|}
|}
[[Category:Year_1989]]

Latest revision as of 22:52, 19 February 2023

Dempa Micom Soft Analog/Digital Controller System

Originally developed for use with the Sharp X68000 Japanese home computer, this controller system supported up to four analog axes, ten buttons, and multiple modes and special features.

Released in 1989, XE-1AP control pad version was ahead of its time. It was the first game pad to feature grip handles, analog thumb controls, and shoulder buttons (with two shoulder buttons on each side). It heavily influenced the design of the Sega Saturn 3D Control Pad, which was the basis for the Sega Dreamcast and Microsoft Xbox control pads. It was nicknamed the horseshoe crab (kabutogani) controller in Japan due to its shape.

Variants

This analog controller was sold in two versions:

  • XE-1AJ desktop HOTAS flight control style joystick. Also sold with Sharp branding as the XZ-8NJ2 Cyber Stick
  • XE-1AP control pad, with added support for use with Sega consoles

XE-1AJ

The XE-1AJ has the following controls:

  • Two-axis analog joystick
    • Thumb button A
    • Index finger trigger B
    • A Rapid Fire On/Off switch to the right of button
  • Analog throttle (spring-returned)
    • Thumb button D
    • Thumb rocker switch E1 (down)/E2 (up)
  • Panel controls:
    • A, B, C, Select and Start buttons
    • A/B Normal/Reverse switch (exchanges the functions of A and B buttons)
    • A Hold On/Off switch (enables auto-fire when A Rapid Fire is on)
    • A Trigger Speed slider (adjusts A rapid fire speed)
    • B Trigger Speed slider (adjusts B rapid fire speed)
    • B Manual/Auto/Hold switch (switches between normal, rapid fire, and auto-fire modes for B)
    • Analog/Digital Mode switch
  • Reset button on rear panel (special modes can be enabled by holding panel buttons while pressing the reset button)

The Start and Select buttons are sometimes referred to as F and G, respectively.

The positions of the throttle and stick can be exchanged for for left-handed or right-handed use.

XE-1AP

The XE-1AP has the following controls:

  • Two-axis analog thumb stick (centre left)
  • Analog throttle slider (centre right, can be rotated through 270°, but rotation is not reported)
  • Shoulder buttons A (right upper), B (right lower), C (left upper), and D (left lower)
  • Face buttons:
    • Upper right A' (outer) and B' (inner)
    • Upper left E1 (outer) and E2 (inner)
    • Lower Start (right) and Select (left)
  • Mode switches:
    • MD/Personal Computer interface
    • Analog/Digital mode
    • A Normal/Auto fire mode
    • B Normal/Auto fire mode
    • Channel Shift On/Off Switch (on underside, changes functions of analog controls)

Channel shift mode is designed as an alternate control scheme for racing games. With channel shift mode on, the throttle slider is used to steer, and the stick is used to shift gears (left/right), accelerate (up) and brake (down).

Digital Mode

In digital mode, the controller emulated a digital joystick or control pad for games that lack support for analog controls.

XE-1AJ

Digital mode is compatible with many games designed to work with standard 2-button MSX-compatible joysticks, using the stick, A and B buttons. Note that it will not work with software designed to work with a Fujitsu FM Towns Marty Pad.

XE-1AP MD interface

This mode is compatible with games designed to work with a 3-button Sega Mega Drive Control Pad:

Stick up Up
Stick down Down
Stick left Left
Stick right Right
A button A
B button B
C button C
Start button Start

XE-1AP Personal Computer interface

This mode is compatible with most games designed to work with a Fujitsu FM Towns 6-button Pad:

Stick up Up
Stick down Down
Stick left Left
Stick right Right
Throttle up Z
Throttle down Y
A button A
B button B
C button X
D button C
Start button Run
Select button Select

E1 and E2 are also readable, but will only be recognised by software designed specifically for the XE-1AJ or XE-1AP in digital mode. Note that fighting games will not be playable, as the throttle slider is not a suitable substitute for two buttons.

Emulation Status

Currently, MAME supports the XE-1AP variant in Analog and Digital modes, for both the MD and Personal Computer interfaces. It can be used with the Sega Mega Drive console family, NEC/Hudson Soft PC Engine console family (using the XHE-3 adapter), Sharp X68000 computer family, and Fujitsu FM Towns computer family.

A Auto, B Auto, Channel Shift, and special modes enabled by holding buttons at power on are not supported.

Due to the number of controls and complexity, you will need to manually assign inputs. Here are example assignments that largely mirror the original layout using an Xbox-style controller:

Start Start
Select Back
A Right Button
B Right Trigger
C Left Button
D Left Trigger
E1 D-pad Left
E2 D-pad Right
A' B
B' A
AD Stick X Analog Left Stick X
AD Stick Y Analog Left Stick Y
Throttle Right Stick Y

This is not be the most ergonomically comfortable way to play every game. In particular, you may want to either avoid using right-hand face buttons so the right stick can be held in position, or assign the Throttle Analog Inc/Dec inputs (rather than the Throttle Analog input) and reduce its auto-centring speed to zero in MAME’s Analog Input Adjustments menu so the emulated control will hold its position.

For games that use opposite direction on the throttle to accelerate and decelerate/brake, you can assign “Right Trigger Reverse or Left Trigger” to the Throttle, and use the right trigger to accelerate and the left trigger to decelerate/brake. Remember not to assign the triggers to buttons if you’re using them to control the throttle.

Compatible Games

This list is incomplete.

After Burner II (Mega Drive)

  • Connect the XE-1AP to the first controller port
  • Select Analog mode and MD interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
Stick Flight attitude, navigate menus
Throttle Speed
A or A' Fire missile
B or B' Fire Vulcan guns
C and D Only used in input test
Start Pause or resume game, select menu items

Ayrton Senna’s Super Monaco GP II (Mega Drive)

  • Connect the XE-1AP to the first controller port
  • Select Analog mode and MD interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
  • This game is intended to be played with the throttle control rotated for horizontal movement – you may need to reassign it
Stick left/right Choose track, move text entry cursor, adjust settings
Stick up Accelerate, navigate menus, move text entry cursor
Stick down Brake, navigate menus, move text entry cursor
Throttle Steer
A or A' Shift up, select menu items
B or B' Shift up, exit menus
C Shift down, select menu items
D Shift down
E1 or E2 Pit in
Start Start, pause or resume game

Galaxy Force II (Mega Drive)

  • Connect the XE-1AP to the first controller port
  • Select Analog mode and MD interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
Stick Flight attitude, navigate menus
Throttle Speed
A or A' Fire missiles
B or B' Fire shots
Start Pause or resume game, select menu items

Fire button functions can be exchanged in the game’s Options menu.

After Burner II (PC Engine)

  • Connect the XE-1AP to the controller port using the XHE-3 adapter
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
Stick Flight attitude, navigate menus
Throttle Speed
A or A' Fire missile
B or B' Fire Vulcan guns, select menu items
Start Select menu items
Select Pause or resume game, navigate menus, press while holding Start to reset

Operation Wolf (PC Engine)

  • Connect the XE-1AP to the controller port using the XHE-3 adapter
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
Stick Move aiming cursor
A or A' Fire rocket launcher, select stage
B or B' Fire machine gun, select stage
Start Start, pause or resume game, skip cutscenes
Select Press while holding Start to reset

Out Run (PC Engine)

  • Connect the XE-1AP to the controller port using the XHE-3 adapter
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode
Stick left/right Steer, radio tuner dial
Stick up Select low gear, navigate menus
Stick down Select high gear, navigate menus
Throttle Accelerator pedal
A, A' , B, B' , C, D, E1 or E2 Brake pedal, select radio station
Start Pause or resume game, select menu items
Select navigate menus, press while holding Start to reset

Thunder Blade (PC Engine)

  • Connect the XE-1AP to the controller port using the XHE-3 adapter
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • The controller is only detected on start, so you will need to reset the emulated machine if you switch between analog and digital mode

Although analog mode is recognised and supported, it does not provide any benefits over a digital control pad or joystick. Movement speed is fixed, and no additional buttons are supported.

Stick Helicopter movement
A or A' Fire cannon, adjust settings
B or B' Fire missiles
Start Pause or resume game, select menu items
Select Navigate menus, press while holding Start to reset

Forgotten Worlds (PC Engine Super CD-ROM²)

  • Connect the XE-1AP to the controller port using the XHE-3 adapter
  • Insert the CD-ROM² Super System Card and the Forgotten Worlds CD
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • Press the Run button on the XHE-3 adapter at the Super CD-ROM² System screen to start the software (the Start button on the XE-1AP will not be recognised)
Stick Movement, navigate menus, adjust settings
Throttle Aim
A or A' Fire, purchase items in shop, skip cutscenes, select menu items, adjust settings
B or B' Fire, skip cutscenes
C Purchase items in shop, skip cutscenes, select menu items, adjust settings
D Skip cutscenes
Start Start, pause or resume game
Select Show or hide score/item screen when paused, navigate menus, press while holding Start to reset

After Burner II (X68000)

  • Connect the XE-1AP to the first joystick port
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • Press the OPT.1 key on the keyboard (PrtScr by default) at the title screen to enable joystick controls
Stick Flight attitude, navigate menus
Throttle Speed
A or A' Fire missile
B or B' Fire Vulcan guns
Start Select menu items

Super Hang-On (X68000)

  • Connect the XE-1AP to the first joystick port
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
Stick left/right Steer
Throttle down Throttle
Throttle up Brake, navigate menus
A, B, A' , B' , C, D, E1, E2, Start or Select Start game, select menu items

Syvalion (X68000)

  • Connect the XE-1AP to the first joystick port
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
Stick Move, navigate menus
A, A' , B or B' Fire, skip cutscenes, continue, select menu items

Thunder Blade (X68000)

  • Connect the XE-1AP to the first joystick port
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
Stick up/down Rotor collective pitch (vertical movement), navigate menus
Stick left/right Rotor cyclic pitch (horizontal movement)
Throttle Speed
A or A' Fire cannon, start game, select menu items, adjust settings
B or B' Fire missiles, start game, select menu items, adjust settings
Start Start game
Select Options menu

After Burner III (FM Towns)

  • Connect the XE-1AP to the second controller port
  • Select Analog mode and MD interface in MAME’s Machine Configuration menu
  • Use a Towns Pad connected to the first controller port to navigate the menus and change the Input Device to Analog Stick or Analog Pad
Stick Flight attitude, navigate menus
Throttle Speed, after burner level
A or A' Fire missile, select menu items
B or B' Fire Vulcan guns
C or D Hold to activate after burners
Start Start, pause or resume game, dismiss input test

Taito Chase H.Q. (FM Towns)

  • Connect the XE-1AP to the second controller port
  • Select Analog mode and Personal Computer interface in MAME’s Machine Configuration menu (the defaults)
  • Use a Towns Pad connected to the first controller port to navigate the menus and change the Input Device to Analog
Stick left/right Steer
Stick up Select low gear
Stick down Select high gear
Throttle down Accelerator pedal
Throttle up Brake pedal
A or A' Select next axis (channel) in input test
B or B' Exit input test
D Activate turbo boost

Galaxy Force II (FM Towns)

  • Connect the XE-1AP to the second controller port
  • Select Analog mode and MD interface in MAME’s Machine Configuration menu
  • Use a Towns Pad connected to the first controller port to navigate the menus and change the Input Device to Analog Stick or Analog Pad
Stick Flight attitude, navigate menus
Throttle Speed
A or A' Fire missiles, select menu items
B or B' Fire shots
Start Pause or resume game, dismiss input test