MNW: Difference between revisions
No edit summary |
No edit summary |
||
Line 265: | Line 265: | ||
== [http://github.com/mamedev/mame/blob/master/src/mame/atari/tank8.cpp atari/tank8] == | == [http://github.com/mamedev/mame/blob/master/src/mame/atari/tank8.cpp atari/tank8] == | ||
''' tank8a, tank8b, tank8c, tank8d ''' - Bad / incomplete dumps. | ''' tank8a, tank8b, tank8c, tank8d ''' - Bad / incomplete dumps. | ||
== [http://github.com/mamedev/mame/blob/master/src/mame/atlus/cave.cpp atlus/cave] == | |||
''' cellage ''' - Photo booth. Needs correct GFX emulation plus emulation of camera and printer. | |||
== [http://github.com/mamedev/mame/blob/master/src/mame/att/unixpc.cpp att/unixpc] == | == [http://github.com/mamedev/mame/blob/master/src/mame/att/unixpc.cpp att/unixpc] == | ||
Line 1,250: | Line 1,253: | ||
== [http://github.com/mamedev/mame/blob/master/src/mame/konami/overdriv.cpp konami/overdriv] == | == [http://github.com/mamedev/mame/blob/master/src/mame/konami/overdriv.cpp konami/overdriv] == | ||
Driver has heavy graphic problems. Missing road (two unemulated K053250). | Driver has heavy graphic problems. Missing road (two unemulated K053250). | ||
== [http://github.com/mamedev/mame/blob/master/src/mame/konami/stingnet.cpp konami/stingnet] == | == [http://github.com/mamedev/mame/blob/master/src/mame/konami/stingnet.cpp konami/stingnet] == |
Latest revision as of 15:11, 4 November 2024
This page is designed to allow for a quick look over all the drivers with a MACHINE_NOT_WORKING flag by giving, as much as possible, an idea on the amount of effort needed to fix them.
access/acvirus
80C5xx + dsp56k based. Skeletonish.
acorn/aa310
RISC OS Draw app uses unimplemented copro instructions; needs ABORT line support to the ARM core; missing hard disc controller, serial interface, 82c711, podules expansions.
acorn/accomm
Skeletonish.
acorn/aristmk5
Hardware differences from the base Acorn Archimedes are not fully understood yet.
Shares timing issues like base AA.
acorn/bbc
torch301, torch725, abc110, acw443, abc310, reutapm, bbcmaiv, bbcmarm, discmate, discmon, cfa3000, cfa3000bp, econx25, autoc15, daisy, mpc800, mpc900, mpc900gx, sist1 - All have different hardware combinations which aren't implemented yet.
acorn/electron
btm2105 -
acorn/riscpc
PS/2 keyboard doesn't work properly, CMOS settings don't work, pending fatalerror from ARM7 core.
acorn/ssfindo
tetfight - PS7500 is preliminary. EEPROM write hook up isn't correct, causing incorrect configuration after saving.
acorn/z88
act/apricotf
Needs CTC/SIO interrupt acknowledge, CTC clocks and sound emulation.
act/apricotp
Needs devices, LCD and sound hook-ups.
act/apxen
Needs boot ROM disable, wrap around mode, floppy, DMA, harddisk, keyboard, RS232, printer, colour graphics board.
adc/super6
Floppy emulation needs fixing, peripherals aren't emulated.
adc/superslave
adp/adp
fstation - Suntris crashes due to HD63484 emulation problems.
funlddlx - Keeps looping between F_IN and FOUL messages.
adp/manohman
Preliminary driver.
agat/agat
Similar to Apple II (same bus architecture, keyboard and floppy interface), but video controller is completely different.
agat9 - Needs memory banking. Extensive todo at the top of the driver.
akai/akaiax80
Skeletonish. UPD7811 based.
akai/mpc3000
Preliminary driver. NEV V53 CPU and L7A1045-L6048 sound DSP emulation is preliminary.
alesis/alesis
The driver seems quite flashed out, but has no notes on what's missing.
alpha/champbas
tbasebal - M68705 MCU isn't emulated yet.
altos/altos2
Keyboard not dumped and emulated.
altos/altos486
Still very incomplete.
altos/altos5
When running MP/M, dir command crashes the system.
altos/altos586
Only the diags floppy boots. Preliminary driver.
amiga/alg
Laserdisc games on Amiga 500 hardware. They all work in theory, but are waiting for a good quality laserdisc dump.
amiga/amiga
Amiga chips emulation lacks a lot of features.
amiga/arsystems
ar_dart2 - Bad dump.
amiga/cubo
eldoraldg - Touchscreen is offset and cannot be calibrated, joystick buttons aren't recognized properly, has slight GFX bug with roulette ball.
lsrquiz - No player 2 inputs (ingame), wrong pitch for most gfxs, access violation during gameplay or on emu exit (microtouch?).
lsrquiz2i - Wrong pitch for some gfxs, access violation during gameplay (microtouch?).
lsrquizg - Doesn't accept coins, no player 2 inputs (ingame), wrong pitch for most gfxs, access violation during gameplay or on emu exit (microtouch?).
odeontw - 'Invalid NVRAM', accesses area $6xxxxx and claims invalid RAM config if bypassed.
odeontw2 - Resets halfway thru "please wait" in service mode, therefore NVRAM cannot be inited.
amiga/mquake
A complete mystery. The existing dumps are 100% confirmed. Test mode works. All remaining code is heavily encrypted. Even the original author of the game doesn't recall any encryption, but it is definitely there. It is not done in software; all unencrypted code has been accounted for.
amirix/wxstar4k
M68010 based. Cable head-end unit. Very preliminary.
ampro/lbpc
PC. V40 based. Inputs aren't hooked up.
amstrad/amstr_pc
The driver seems quite flashed out, but has no notes on what's missing.
amstrad/pcw
amstrad/pcw16
amstrad/pda600
Serial port doesn't work.
apollo/apollo
dn5500, dsp5500, dn5500_19i - Newer models aren't fully emulated yet.
apple/apple2
space84 - Clone on different hardware.
apple/apple2e
mprof3, prav8c - Clones on different hardware.
apple/apple2gs
apple2gsmt - Prototype with some different hardware. Differences not emulated yet.
apple2gsr3p - A ROM isn't dumped.
apple/imacg3
Very preliminary driver.
apple/lisa
Lisa OS doesn't boot.
apple/macpdm
apple/macpwrbk030
Via6522 emulation is imperfect and causes numerous bugs.
apple/pippin
Very preliminary driver.
apple/powermacg3
Very preliminary driver.
apple/tk2000
Apple II clones, not fully compatible. Differences aren't correctly emulated yet.
arcadia/arcadia
mratlus, plldium, polyvcg, trakcvg -
aristocrat/aristmk4
86lions - Runs on earlier, slightly different hardware.
clkwise - Needs redump of the program ROMs.
aristocrat/aristmk6
Skeleton driver. System is SH4 based.
astrocorp/astrcorp
cptshark - Needs verifying inputs and outputs.
gostopac - Stuck during boot with 'S4' message. Also needs correct 'CPU code'.
hapfarm - Problems with interrupts?
magibomba, westvent - Bad dump of a program ROM.
magibombb, magibombc, magibombf, magibombh, magibombi - Freeze due to unemulated protection.
magibombd, winbingoa Need correct sprite ROM dump.
magibombg - Needs correct "CPU code", EEPROM and sprite ROM dump.
monkeyl and clones - Need correct "CPU code", outputs and inputs need to be checked.
speedmst and clones - Need correct "CPU code" and EEPROM dump.
wwitch - Need correct "CPU code", correct GFX ROM loading, outputs and inputs.
astrocorp/astropc
Fruit machines. AMD Geode based. Skeletonish.
atari/a2600
a2600_pop - 2 joysticks and 2 paddles are hooked up to the unit; unknown how.
atari/atari400
a1200xl - Bad dump.
a65xea, a130xe -
atari/atarigx2
All of these games suffer from some advanced protection that affects them in different ways. Through some magic accesses in memory, data can be decrypted using some special key sequences that are not entirely understood. It's possible to find all possible data sources, run them through the decryption process on the real PCB, and then encode that information in the driver, and for some of the games it has been done. Only rrreveng and clones are missing.
rrreveng and clones - Unemulated protection. It's possible the same method used to break Moto Frenzy's protection could be used.
atari/atarist
Emulation still preliminary. TODO is on top of the source file.
atari/atarisy2
paperboyp - Prototype with possibly different hardware. Some program ROMs didn't read consistently and are suspected bad. GFX ROMs weren't dumped for this set.
atari/atarittl
tank - Netlist has been added but needs debugging and it runs very slow.
atari/atetris
atetrisb5 - Uses a large TTL board as substitute for Slapstic and Pokeys. Currently unemulated.
atari/badlandsbl
Inputs aren't correctly hooked up, missing sprite-tilemap priority, colors. Sound hw isn't correctly hooked up.
atari/bartop52
Coins and timer were handled by Bartop system bios. Since bios dump is not available, regular Atari 5200 bios is used and game is marked as not working. Game cart is also marked as bad dump as it is done in "console style", i.e. one file for all game data.
atari/bwidow
bwidowp - Prototype on different hardware.
atari/bzone
dsrtwars - Bootleg with different sound system. Mostly works but sound is very badly emulated.
atari/centiped
magworma - Service mode works, game does not.
atari/cmmb
Banking not understood.
atari/cops
cops and clone - No laserdisc dump.
atari/harddriv
steeltalp, hdrivairp - Prototypes, possibly running on slightly different hardware.
atari/hitparade
Juke box. TMS1300 based. The mechanical parts aren't emulated.
atari/jaguar
jaguar, jaguarcd - Currently the driver is geared toward supporting the cojag arcade games. Jaguar console support is very poor, most games aren't properly playable or have severe performance issues or crashes related to the unsafe blitter code.
atari/klax
klax5bl3 - Audio CPU has encrypted opcodes.
atari/mediagx
Mainly just need the inputs hooked up, which are mapped to the parallel port via a JAMMA interface.
atari/metalmx
Skeleton driver. Extremely complex prototype hardware.
atari/missile
mcombat, mcombata, mcombats - Bootlegs on different hardware.
missilem - This kit combines Missile Command and Super Missile Attack on ddaughterboard plugged into the main pcb cpu slot.
atari/quizshow
Missing tape dump and GFX ROMs need redump.
atari/tank8
tank8a, tank8b, tank8c, tank8d - Bad / incomplete dumps.
atlus/cave
cellage - Photo booth. Needs correct GFX emulation plus emulation of camera and printer.
att/unixpc
DIVS instruction at 0x801112 (the second time) causes a divide-by-zero exception the system isn't ready for due to word at 0x5EA6 being zero. Code might not get there if the attempted FDC boot succeeds; FDC hookup probably needs help. 2797 isn't asserting DRQ?
ausnz/amust
Lots of work still needed. Lacks software to further improve emulation.
ausnz/dmax8000
Needs parallel port, centronics port, AUX serial port and FDC/FDD/HD setup.
ausnz/labtam
Needs emulation of additional cards.
ausnz/mbee
mbee128, mbee128p, mbee256, mbee56, mbeepp, mbeett - Hardware differences haven't been emulated yet.
ausnz/poly
Preliminary driver. Extensive TO-DO at the top of the driver.
ausnz/proteus
Doesn't seem to work with the generic terminal. It's supposed to be used with a Lear Siegler ADM-31 terminal.
ausnz/pulsar
Floppy doesn't work correctly.
banctec/banctec
Preliminary driver.
bandai/rx78
Inputs might be incorrectly hooked up.
barcrest/mpu1
Missing layouts.
barcrest/mpu3
Most games fail to boot, giving the CPU a 'WAIT' instruction then sitting there; some complain about Characterizer (protection) and then do the same; a few boot to show light displays with no LED text; some display misaligned LED text; many run VERY slowly, even when the CPU is inactive (inefficient MAME timer system overhead?).
barcrest/mpu4avan
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4bwb
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4concept
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4crystal
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4empire
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4mdm
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4misc
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4mod2sw
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4mod4oki
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4mod4yam
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4plasma
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4redpoint
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4union
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4unsorted
Fruit machine hardware. Not working yet. Needs artwork.
barcrest/mpu4vid
Needs correct implementation of characteriser protection for each game. BwB games need more work: They have a slightly different 68k memory map. The 6850 is at e00000 and the 6840 is at e01000; they appear to hang on the handshake with the MPU4 board. Currently using a scanline timer to drive an approximation of the SCN2674 scanline logic, but this is perhaps better served as a proper device. Deal 'Em lockouts vary on certain cabinets (normally connected to AUX2, but not there?). Deal 'Em has bad tiles (apostrophe, logo, bottom corner), black should actually be transparent to give black on green.
be/bebox
bfm/bfcobra
beeline, inquiztr - Missing floppy disk image.
bfm/bfmsys85
Fruit machine hardware. Skeleton driver.
bfm/bfm_blackbox
Mostly missing layouts to be considered playable.
bfm/bfm_sc1
Fruit machine hardware. Skeleton driver.
bfm/bfm_sc2
m_bcgslm, m_brkfst and clones, m_bfocus, m_cpeno1, m_luvjob - Mechanical games imported from AgeMame. The fruit machine games don't work either.
gldncrwnhop - Has different protection from the parent.
quintond - Missing emulation of RS232 data link device (see BACTA Datapak specs for more info).
bfm/bfm_sc4
Fruit machine hardware. Most games pass the startup tests.
bmc/koftball
Incomplete protection simulation.
bmc/popobear
magkengo - Slightly different PCB. Needs emulation of its peculiarities.
brother/ax145
Stops while checking the printer.
brother/lw700i
Keyboard matrix hasn't been completely figured out yet.
canon/canon_s80
Skeleton driver.
canon/cat
Big TODO at the top of the driver.
capcom/alien
Preliminary driver (SH4 based system). Has 2 MPEG2 decoder chips.
capcom/cps1
pmonster - Needs hopper emulation.
sf2amf, sf2stt - Missing program ROMs dump.
varthb3 - Different video registers need emulating.
capcom/mitchell
pangbp - Has an extra Z80 with battery backed RAM for protection. RAM dump not available.
pkladiesbl, pkladiesblu ' - Needs CPU "decryption".
pkladiesbl2 ' - Needs inputs, sound and GFX fixes.
spangbl2 - Bootleg on different hardware.
casio/cfx9850
Preliminary driver.
casio/ctk2000
Keyboard. Emulation is preliminary. ARM derivative.
casio/fp1100
IRQs aren't emulated, cassette, FDC and keyboard don't work.
casio/fp200
Needs cassette i/f, serial i/f, FDC (requires test program that Service manual mentions), ROM/RAM slot interface, mini plotter printer (FP-1011PL) and graphic printer (FP-1012PR).
casio/fp6000
FDC/HDD and cassette saving don't work.
casio/ld50
Electronic drums. I87C52. Dream SAM9793 and Burr-Brown PCM1717E DAC aren't emulated.
casio/pb1000
casio/pickytlk
Missing inputs, and I/O callbacks copied from CFX9850G need to be reviewed.
casio/pv2000
Keyboard is only partially supported, joystick and cassette aren't emulated.
casio/sk1
CPU is an unemulated MSM6283, possibly with undumped internal ROM.
cave/cv1k
mmmbanc - Needs touch screen emulation handled via SH4 serial.
ccs/ccs2810
Floppy implementation needs work.
ceres/ceres
Needs startup/reset memory map, i/o device mapping, interrupt acknowledge, WD1002-05 Winchester/Floppy Disk Controller (WFC), keyboard, mouse.
ces/cesclass
Needs custom layout for dual LCDs, artwork and lamps position needed to make progresses, U43 and U44 bad in Trap Shoot Classic, games are incredibly sluggish, irq sources are unknown, Trap Shoot Classic runs on a single LCD, needs mod.
chromatics/cgc7900
Skeleton driver.
cinematronics/dlair
dlairc, dlairb, dlaira, dlair_2, dlair_1, dleuro, dleuroalt, dlital - Only LD-V1000 versions are supported, due to no viable solution for reading configuration DIPs at init time.
spaceace and clones - No laserdisc dump yet.
cinematronics/leland
aafbb - One of the program ROMs is a bad dump.
citoh/cit220
Preliminary driver. I8085A based.
coleco/wrinkles
Sensors aren't emulated yet.
commodore/c64
clipper - Hardware differences haven't been emulated yet.
commodore/c65
Preliminary driver. Extensive TODO at the top of the driver.
commodore/cbm2
bx256hp, cbm730 - The i8088 board isn't emulated yet.
cbm720_de - Missing chargen dump.
commodore/mps1230
Printer. Basically a skeleton driver.
commodore/pet
compugraphic/pwrview
Preliminary driver. I80186 based.
conitec/prof180x
conitec/prof80
cromemco/c10
Driver currently gets to a loop where it waits for an interrupt.
dataeast/btime
tisland - The decryption seems good but needs a ROM patch for some opcodes. The ROM is confirmed good, so maybe some special feature of the DECO-7 CPU?
dataeast/cntsteer
cntsteer - Needs better understanding of the communications and correct ROZ layer implementation.
gekitsui, zerotrgt and clone - Need better ROZ layer implementation.
dataeast/dec0
automat - Bootleg on different hardware. Minor video glitches.
bandit - Incomplete decbac chip emulation causes bad GFXs.
mastbond, secretab - Bootleg on different hardware. Unemulated layer scrolling and banking.
ffantasybl - Hangs after killing Lamia. Might have to do with the M68705 MCU, which isn't dumped.
dataeast/dec8
ghostb3a - The game hangs as gameplay starts. ROMs confirmed working on PCB. MAME sync problems?
dataeast/deco32
gunhard, lockload, lockloadu - lightgun hookup not completely understood, randomly locks up
dataeast/deco_ld
The driver needs better video e I/O emulation, laserdisc hook-ups.
dataeast/deco_mlc
skullfng and clones - Random hangs sometimes.
stadhr96j2 - Stops with a mismatch between mother board and cart country code.
dataeast/deshoros
Needs graphics emulation through artwork system and printer emulation.
dataeast/karnov
karnovjbl - Bootleg. Uses a different MCU (NEC D8748HD) which needs simulation or, if possible, dumping.
dataeast/pcktgal
pcktgalba - This bootleg connects two PCBs with completely different hardware. The Pocket Gal PCB is emulated here, while the other isn't currently connected and the switching between the two games isn't emulated.
dataeast/progolf
progolfa - Ball is misplaced when on the ground.
dataeast/tumbleb
funkyjetb, tumblebpa - Bootlegs on different hardware
ddr/ac1
ac1scch - Hardware differences aren't emulated yet.
ddr/bcs3
bcs3a, bcs3b, bcs3c, bcs3d -
ddr/chessmst
chessmsta - Figure out why it won't work, for starters it assumes z80 carry flag is set at poweron?
ddr/kc
ddr/mc8030
Very little documentation available, so the driver is mostly guesswork. Z80 based.
ddr/nanos
ddr/pcm
Lack of software makes it difficult to prove the emulation is correct.
dec/dct11em
Skeleton driver.
dec/dectalk
Extensive TODO at the top of the driver.
dec/kn01
Needs SCSI and mouse emulation.
dec/kn02
MIPS family based. Preliminary driver.
dec/pdp11
dec/rainbow
dec/vax11
dec/vk100
dec/vt100
dec/vt62
VT61 based. Very preliminary. Missing some dumps.
dms/dms5000
Skeleton driver.
dms/dms86
Preliminary driver.
dynax/ddenlovr
momotaro - Protection + some ROMs are badly dumped.
dynax/dynax
tenkai2b - Missing dump of the internal ROM of the TMP91640.
dynax/royalmah
cafebrk, cafepara - Internal ROM has been dumped but data ROM seems scrambled.
cafedoll, cafedollg, ougonhai - Protection checks not completely circumvented.
chalgirl, mjsenka, mjsiyoub, rkjanoh2 - Banking needs to be verified by finishing the game.
ichiban, pongboo2 - Banking not understood yet.
janoh - Incomplete dump.
janoha -
jansou - Missing internal program ROM.
mjdejavu and clone - Calls by the player don't work.
mjtensin - Random crashes, related to interrupts.
ougonhaib3 - One GFX ROM is a bad dump.
efo/cedar_magnet
mag_drac - Bad dump.
elektor/ec65
Preliminary driver.
elektron/elektronmono
MCF5206E based. Skeletonish.
ensoniq/enmirage
Needs Four Pole Low-Pass Voltage Controlled Filter section, external sync signal, foot pedal, ADC feedback, piano keyboard controller, expansion connector, stereo output.
ensoniq/esq1
ensoniq/esqasr
Skeleton driver.
ensoniq/esqkt
ts10, ts12 -
ensoniq/esqmr
Skeleton driver.
eolith/eolith
raccoon - Game animation & timers seem too fast.
epson/hx20
Needs emulation of: keyboard interrupt, LCD controller, serial, SW6 read, RS-232, microcassette, printer, ROM cartridge, floppy TF-20, barcode reader. Might need a M6800 core rewrite.
epson/px8
epson/qx10
esprit/esp250c
Preliminary driver.
esprit/executive10
Video emulation is missing features, no NOVRAM store / recall.
exidy/exidy440
showdown4 - Different type of protection wrt to the parent.
f32/f-32
royalpk2 - It will soft-lock when attempting to use either settings-save options in the service menu.
facit/f4431
Missing emulation of character attributes (RAM at 0xc000), cursor, 132 column mode, smooth scrolling, timings, printer.
facit/facit4440
Keyboard isn't emulated.
fairchild/f387x
Computer. F8 based. Driver is skeleton-ish.
fairlight/cmi
MASTER 'TIM' test fails. LGTST 'TIM' test is out of tolerance without 6840 hack.
falco/falco500
falco5220e - Bad dump. ASIC emulation is incomplete.
falco/falcots
force/miniforce
Very preliminary driver.
fujitsu/fm7
fm11, fm16beta, fm7740sx - Extra features not implemented.
fujitsu/fmtowns
Video emulation is far from complete.
funtech/supracan
funworld/4roses
Skeleton driver. The games' program ROM has been decrypted, but they have an undumped MCU which needs decapping or simulation.
funworld/funworld
fw_a7_11, fw_a7_11a, fw_a0_1, jokcrdep - Different hardware with epoxy block, to be reverse engineered.
jolyjokrc - Bad program ROM.
multiwinb - Encryption not figured out yet.
royalcrd_msx , royalcrd_nes and clone - Stealth games which combine the poker game hardware and the console hardware.
funworld/photoply
FDC error, needs a DASM investigation / work-around.
funworld/supercrd
Partially decrypted but need more work to be playable.
gaelco/atvtrack
Preliminary driver.
gaelco/bigkarnk_ms
Heavily modified bootleg of Big Karnak running on the Modular System. Only preliminary work has been done.
gaelco/gaelco2
play2000_50i - Bad dump.
aligatorp, chmppool, jungleani, srollnd - Missing ds5002fp dump.
gaelco/goldart
DS5002FP based. Preliminary driver, GFX, sound and inputs aren't properly emulated yet.
gaelco/mastboy
mastboyiv2 - Needs a different MCU program.
gaelco/rollext
GFX glitches, possible DSP core bugs.
gaelco/splash
funystrp, puckpepl - Protection, controls eating of dots + other things.
rebus - Another protected Microhard game.
ringball - Currently stuck at initialization / test mode, probably protected.
galaxian/fastfred
boggy84b2 - Missing the dump of a program ROM.
galaxian/galaxian
amidarc, aracnisa - Resets when starting a game.
ckongcv, ckongis - Bootleg on different hardware.
dingoe - Probable bad dump and encryption.
highroll - Auto starts game after inserting coin, bad cards GFX, bad inputs response, not all inputs are mapped.
jungsub - Different hardware, needs better GFX handling and one GFX ROM is bad.
ncentury, scramblebun, scrammr - Stuck at boot. IRQ isn't enabled correctly. Protected?
mooncrs5, mutacion, supergx - Bad dumps.
olibug - One of the GFX ROMs is bad. Uses the Galaxian PROM, which gives bad colors(?).
tenspot - Menu isn't working yet.
warofbugg - Bootleg on slightly different hardware.
galaxian/galaxold
drivfrcsga, spcwarp - Bad dump.
trvchlng - Questions ROMs aren't dumped.
galaxian/scobra
rescuefe - Bad / incomplete dump.
gamepark/gp2x
Skeleton driver.
gamepark/gp32
Driver is quite advanced, but isn't fully working yet.
gametron/sbugger
sbugger - Bad dump, different revision to working set.
grundy/newbrain
handheld/hh_cop400
vidchal - Needs videotape support.
handheld/hh_hcms40
bombman, gdefender, ggdman, ktparman, puckimon, tkjmaru, wantgman - Missing artwork.
handheld/hh_pic16
pabball, uspbball - Preliminary drivers.
handheld/hh_smc1k
Missing SVGs.
handheld/hh_sm510
nsmb3, nsmw - Missing LCD scan.
handheld/hh_tms1k
bship and clone, elecbowl - As far as MAME is concerned, the game is emulated fine. But for it to be playable, it requires interaction with other, unemulatable, things (eg. game board/pieces, playing cards, pen & paper, etc).
tithermos - Temperature sensor comparator isn't emulated yet (right now just the digital clock works).
handheld/pensebem
handheld/tispeak
k28m2 - LCD isn't emulated.
lantransp, tnttellp - Version from the patent. Maybe incompatible with released modules?
hds/hds200
Needs fixing the SCN2674/Z80DMA hookup, missing keyboard keys and RS232 control lines.
heathkit/h19
gp19 - GP-19 graphics mode only shows the top half of the image (on the visible screen).
heathzenith/z100
Undumped MCU, plus needs removing of the parity check IRQ patch, implementation of the S-100 bus features, irqs need 8259 "auto-ack"-ing in order to work properly and vertical scrolling isn't understood.
heathzenith/z22
Missing keyboard emulation.
hitachi/b16
No documentation available, almost no software available. Long TODO on top of file.
hitachi/bml3
Long TODO at the top of the file.
hitachi/mbs1
Cassette won't load; many missing features.
homebrew/d6809
Most devices aren't hooked up. Skeletonish.
homebrew/minib
Keyboard isn't working correctly.
homebrew/p112
Skeleton-ish driver. Z8018216 based.
homebrew/pc532
Needs ET532 emulation.
homebrew/phunsy
homebrew/ravens
The cassette saves a noise but it returns a bad load.
homebrew/sbc6510
ATMEGA8 CPU emulation is incomplete.
homebrew/uzebox
SD card not supported yet.
homelab/homelab
brailab4, homelab3, homelab4 - Preliminary driver. Cassette support needs to be fixed, among other things.
hp/hp_ipc
hp9808a - Preliminary driver.
hp/hp16500
Preliminary driver.
hp/hp2620
Keyboard isn't emulated.
hp/hp3478a
Runs, AD LINK ERROR on stock ROM due to unimplemented AD link.
hp/hp48
hp39g -
hp/hp49gp
Preliminary driver.
hp/hp95lx
Native keyboard isn't emulated. Driver still preliminary.
hp/hp9k
Boot tests fail.
hp/hp9k_3xx
Preliminary driver.
hp/hpz80unk
Skeleton driver. Needs banking and peripherals support.
husky/hunter2
Preliminary driver. Without software to test it, it's difficult to progress with the emulation.
ibm/rs6000_type7xxx
Skeleton-ish. Server. PPC601 based.
ibm/rtpc
Diagnostic disk 1 fails with code 67; aix vrm disk 1 fails with alternating code a6/13.
ibm/thinkpad600
Needs keyboard and RTC emulation.
ice/chexx
Electro-mechanical bubble hockey games.
ice/ice_bozopail
Redemption game. Mechanical parts aren't emulated.
ice/lethalj
franticf and clone - Directional inputs (wheel) don't work yet.
ice/vp101
MIPS + custom 3D hardware. Boots but lacks 3d GFX hardware emulation.
igs/cabaret
cabaret - Not fully playable because of some pitfalls.
double8l, kungfua - Undumped internal ROM.
igs/goldstar
3cdpoker, 3cdpokera, animalw, cll, cmfb55, luckylad, pkrmast, prkmasta, rolling, srmagic, super972 - They need work on inputs / dips.
animalhs and clones, eldoraddoa - Need correct GFX banking, I/O.
ll3, wcherry - Only preliminary work has been done.
aplan, chryangla, cmast99, cmast99b - The game appears to be stuck in a loop resetting itself after initialising NVRAM.
bonusch - Undumped MCU.
cb3c - Needs correct memory map and one GFX ROM is a bad dump.
cb3f - Encryption not completely figured out.
cherry96 - Different hardware.
chryangl, chryanglb - Hangs when betting or after a couple of attract mode cycles. Protection related?
cmast92 and clone, eldoradd, eldoraddo - Needs correct GFX emulation. Game is running otherwise.
cmast97 and clone - PROM decode needs fixing, needs correct GFX banking.
cmasterbv, cmv4a - Missing switch between normal and "stealth" game.
cmasteri - ROMs contain only half of what they should, but dump sizes are confirmed wrt to ROM chip type.
cmtetriskr - Needs correct GFX decode.
cmtetrsb - Soon after boot it shows garbage due to wrong graphics banks.
cmv4zg, cmv4zga - Seem to reset after reels stop spinning. Slightly protected?
crazybonb, wcat3a - Decryption should be good. Possibly needs a different machine driver?
hamhouse - Needs correct I/O.
jkrmast, jkrmasta - Preliminary emulation.
luckybar - mc68705 MCU.
magoddsc, magoddsd - Custom encrypted CPU block.
nd8lines - Needs correct PROMs decoding and inputs.
noved - Needs GFX2 region decryption / decode, controls.
feverch, mbs2euro, megaline - Need more work in memory map, inputs, and reels alignment.
nfm and clone - Need decoding of the girls' GFX ROM.
roypok96c - Stuck at the Program Check screen.
super7 - Needs GFX and palette work. First time it boots and works, with written NVRAM it stops waiting for initialization. Slightly wrong decryption?
super9 - GFXs aren't decoded yet.
tcl - Encrypted.
war3cb - Address scrambling needs to be checked.
wcat3 - Encryption not completely broken, can be seen running after a couple soft resets.
igs/igs_m027
amazonia and clone, amazoni2, klxyj, gonefsh2, luckycrs, olympic5 and clone, sdwx - Need dump of the internal ROM.
chessc2 - Needs IGS025 emulation.
extradrw - Inputs not implemented yet.
igs/igs_m027xa
crzybugsj, haunthig and clone, wldfruit - Missing internal ROM dump.
tripfevb - Hangs at payout.
igs/igs011
tygn - Needs correct protection workarounds. Currently fades to black during play.
igs/igs017
jking302us - IGS026 and IGS029 protection needs simulation.
mgcs ande clone - IGS029 protection needs more work.
sdmg2p - Protection sometimes kicks in after starting game, hopper isn't hooked up correctly.
slqz2a - Undumped program ROM.
tarzan - Missing sprites and sound ROM, imperfect tiles decryption.
tarzana - Missing IGS029 protection, missing sprites and sound ROM.
igs/igspoker
cpoker210ks, cpoker300us - Protection handling and inputs / outputs need to be verified.
stellecu - Bad / incomplete dump.
igs/jackie
kungfu - Needs correct inputs for the 'fighting' game.
igs/pgm
dmnfrntpcb, kovlsjb, kovlsjba, kovlsqh, kovlsqh2, kovshp, kovshxas, kovytzy, oldsplus, pgm3in1, puzlstar, svgtw - Need internal ROM of IGS027A.
drgw2100hk - Protections isn't simulated yet.
igs/spoker
3super8 - Roms are badly dumped.
jinhulu2 - Seems to try linking to something. Also needs IGS003 protection emulated.
igt/drw80pkr
Driver shows something, but emulation is still incomplete. I8039 based CPU with CRTC6845 video and AY8910 sound.
igt/gkigt
Preliminary driver. Needs hookup of the QUART devices, and fix "QUART COUNTER NOT RUNNING" error message; interrupt system hookup; understanding of what's "netflex" device. Furthermore, the CMOS doesn't seem to get properly initialized. Also, the ms72c set seems to have extra checks.
igt/peplus
all imperial games - Stuck during initialization.
all pc* sets - This sets use tokens instead of coin. They get stuck with "Token in timeout" message.
peke0004 and clones, peke0017 and clones, pex0006k, pex0013k, px0013ka -
peke0026, pemg0025, pemg0026, pemg0182, pemg0183, pemg0213, pemg0225, pemg0252, peps0205 - Need printer support.
all pepk* sets but pepk1024 -
pepp0021, pepp0079, pepp0596, pepp0598 - Need link support.
pex0489p, pex2474p - Need unknown PE+ GAME POKER program to run.
sv1pf434 - Occasionally makes an alarm sound most likely related to the door.
igt/splus
Driver imported from Agemame. Needs modernisation.
igt/videopkr
bpoker -
informer/informer_207_376
Two ROMs need a redump.
informer/informer_213
Terminal. 6809 based. The ASIC needs to be figured out.
intel/ipc
ipc - Dump incomplete.
intel/ipds
Skeleton driver. I8085A based.
intel/isbc
rpc86, isbc86, isbc8605, isbc8630, isbc286, sm1810 - Preliminary driver 8086 / 286 based.
intel/isbc660
Needs more Multibus cards emulated and installed.
intel/rex6000
intergraph/interpro
Preliminary driver.
irem/m10
ipminvad1 - Incomplete dumps.
irem/m107
kftgoal, wpksoc - Missing EEPROM hook-up.
irem/m62_bkungfu
Blitter data is encrypted and MCU is undumped.
irem/m72
hharryb2, loht_ms, lohtb, rtypem82b, rtype2m82b - The bootleg hardware is different to the original hardware.
irem/m92
nbbatman2bl - Bootleg with different sprite system, MCU as soundcpu, OKI samples for music/sound.
irem/redalert
demoneye - Missing 3rd graphic layer making level 2 impossible. Unclear what the layer should show.
isc/compucolor
ROMs are badly dumped. Needs floppy hook-up.
itech/itech8
stratabs - Controls aren't hooked up.
jaleco/acommand
acommand - Inputs aren't fully understood. Requires a major rework of the artwork sub-system. Needs to be merged with cischeat.cpp driver.
jaleco/armchamp
Mechanical arm simulation isn't perfect.
jaleco/blueprnt
unkzilec - Only the GFX ROMs are dumped.
jaleco/cischeat
armchmp2 and clones - Arm motor emulation is incorrect.
wildplt - Busted timings.
jaleco/ms32
f1superb - The road is always rendered as straight. The game has a road layer and extra ROMs for it. There is an unknown maths DSP for protection.
jaleco/tetrisp2
nndmseal and clones - Missing camera and printer emulation.
stepstag, step3, vjdash - Missing HD / bios dumps for the PC part.
jpm/guab
crisscrs - Missing disk image dump.
jpm/jpmimpct
buzzundr, monspdr, snlad - Incomplete dumps.
jpm/jpmimpctsw
all sets but j6aceclb, j6big50, j6bigbuk, j6bnza, j6camelt, j6cascz, j6gogold, j6guab, j6hapyhr, j6kungfu, j6mono60, j6montlk, j6roller, j6sonic, j6untch and relative clones - Need correct layouts and settings.
jpm/jpmsru
Missing layouts.
jpm/jpmsys5
cashcade - Incomplete dump? Shows a loading error.
monopldx1 - Missing questions?
jpm/jpmsys5sw
The mechanical games aren't emulated yet.
kaneko/galpani2
Kaneko protection MCU with internal rom, managing CPU comms. Decap should possible, should be the same for all games / sets.
kaneko/galpanic_ms
Heavily modified bootleg of Gals Panic running on the Modular System. Only preliminary work has been done.
kaneko/kaneko16
bonkadva - Shows an upside down KO! sprite, probably due to a failed start up check.
kaneko/snowbros
sutjarod - Needs correct protection data.
kaypro/kaypro
Most machines are incompletely emulated. The problems listed in the driver are:
kaypro1084 - Boots from floppy, but needs hard drive added.
kaypro4a - Floppy not working.
kayproiip88, kaypro484p88 - Works as a normal Kaypro 4, extra hardware not done.
omni2, omni4 - I/O board isn't emulated.
robie - Has twin 2.6MB 5.25 floppy drives which aren't supported, no software available.
koei/pasogo
konami/cobra
Complicated Konami 3D hardware. Bujutsu works a bit better.
konami/combatsc
bootcamp, bootcampa, combatscj, combatsct - Trackball isn't correctly emulated.
konami/dbz
dbz2bl - Bootleg on different hardware. Heavy priority / GFX issues, no sound.
konami/gberet
gberetb - Needs correct PROM decoding. As is, GFX are too mangled to play it.
konami/giclassic
Preliminary driver.
konami/goldenregion
Sprite banking isn't understood. Mechanical part isn't simulated.
konami/gticlub
thunderh and clone - They use an additional top board for sound, network and analog control functions.
konami/hornet
sscope and clones, sscope2 and clones -
terabrst and clones - Missing gun emulation.
terabrstaa, terabrstja, terabrstua - Missing gun emulation, won't boot due to issues with the cgboard/konppc.
thrilldbu - Heavy GFX glitches, fails wheel motor test.
konami/ironhors
farwest - Bootleg running on different hardware.
konami/konamigv
btchamp, kdeadeye, tmosh and clones - All games on this system suffer from a corner case involving audio track playback in the SCSI CD-ROM emulation.
konami/konamigx
opengolf and clones, racinfrc and clones - These games use a special ROZ layer generated by the "PSAC4" custom IC which appears to include a height map.
konami/konamim2
btltryst - Unemulated GFX modes make the game too glitchy to be playable.
totlvica, totlvicj, totlvicu - They get stuck during boot.
heatof11 - Hangs if Japan is selected. Timing related, as setting perfect interleave fixes it.
konami/konblands
Missing laserdisc dump.
konami/konendev
Most dumps are incomplete. Those fully dumped boot but fails various mechanical hardware tests.
konami/konmedal
slimekun -
tsururin - Resets after initial ROM / RAM test. IRQ related.
konami/konmedal020
Preliminary emulation.
konami/konmedal68k
crossmg2, fruitsmg - Mechanical parts aren't emulated yet.
dobouchn - Controls need verifying.
pwrchanc, spcpokan - Colors are wrong, inputs not verified.
unkkonmd - Stops with network ID error.
konami/konmedalppc
Preliminary driver. PPC based.
konami/ksys573
Game suffer from incomplete PSX-based hardware emulation and some are missing emulation of the external digital sound and I/O board.
konami/moo
moomesabl - Bootleg on different hardware. Sprite ROMs weren't dumped for this bootleg set.
konami/nwk-tr
Complex Konami 3D hardware.
konami/otomedius
Skeleton driver. PC hardware.
konami/overdriv
Driver has heavy graphic problems. Missing road (two unemulated K053250).
konami/stingnet
Preliminary driver. PPC based.
konami/tasman
Konami GX based PCB for gambling games.
konami/tmnt2
glfgreat and clones - DMA emulation is incomplete.
ssridersb - Bootleg on different hardware. Bad dump.
ssriders2 - Bootleg on different hardware.
konami/twinkle
bmiidx, bmiidxa, bmiidxc, bmiidxca - Connected over the mini-din8 (CN7) and DVD check requires RTS->CTS.
konami/viper
Preliminary driver, PPC+voodoo.
konami/xmen
xmenabl - Sprites are glitched, one Oki ROM is probably bad.
korg/korgm1
Preliminary driver.
kurzweil/krz2000
TMP68301 based. Skeletonish.
kyber/kminus
Computer. Z80 based. No notes on what's missing.
kyocera/kyocera
pc8201 - Cassette's not working, floppies aren't hooked up.
pc8201a - Cassette's not working.
npc8300 - Doesn't boot.
lsi/m3
Unfinished floppy hookup (no available software to test it). Not all keys are mapped.
lsi/octopus
luxor/abc1600
TODOs are short/long reset (RSTBUT), CIO, hard disk and connect RS-232 port A.
luxor/ds90
Skeleton driver. M68010 based.
makerbot/replicator
matsushita/duet16
Floppy not hooked up correctly, still WIP.
matsushita/jr100
Paste drops many characters. Cassette not working correctly
matsushita/jr200
Wrong timings. Also needs a MN1544 4-bit CPU core and ROM dump.
matsushita/kn5000
Preliminary driver. TMP94C241F based.
mattel/intv
intvkbd - Has additional components / devices (i.e. tape) which aren't emulated.
maygay/maygay1bsw
Mechanical game imported from AGEMAME.
maygay/maygayv1
Skeleton driver for fruit machine games.
mc/mccpm
FDC is implemented but there's no software to test it.
mera/m79152pc
Skeleton driver. Z80 based.
merit/merit.cpp
tictacuk - Doesn't register coins.
merit/mtouchxl
mtchxl5k and clones, mtchxlgld and clone - The security key hasn't been reverse engineered.
mtchxlti -
merit/pubtimed
Skeletonish. M6802 based darts game.
metro/metro
metabee - Hopper isn't emulated, so game doesn't start.
poittoc - One of the program ROMs isn't dumped.
puzzlet - In game timer doesn't decrease.
mg1/mg1
Misses hard disc controller and mouse emulation.
microkey/primo
microterm/microterm_f8
WIP driver. Missing some GFX modes.
midcoin/24cdjuke
Skeleton driver for a CD Juke Box.
midcoin/wink
wink, winka - Protection module has been reverse engineered but it's still missing something.
midw8080/8080bw
invasionrza - Bootlegs on slightly different hardware.
sisv1 - Some ROMs aren't dumped.
midway/astrocde
tenpindx - This game used a physical hockey puck which the player slid down the bowling alley. Sensors on the other end picked up the location and velocity of the puck and simulated the pin behavior. Requires simulation of this input interface in order to be considered working.
midway/atlantis
The Zeus2 video chip needs more work.
midway/balsente
triviaes4, triviaes5 - Though clearly derived by the originals in this driver, it uses different hardware, especially for the sound. Banking / ROM loading isn't figured out yet.
midway/mcr
nflfoot - CED-based disk game. Has gory Z80-based serial I/O interface that is not understood. The CED player interface is undocumented. A poor quality rip exists of the video (probably the best we will get). There is a second CED disk with different teams playing which we do not have access to.
midway/midyunit
mkrep -
midway/midzeus
crusnexo, thegrid and clones - These Zeus II-based games use a proprietary 3D graphics chip that has no available documentation.
midway/mw18w
Mechanical game. Needs artwork and lamps and sensors hook up.
midway/mwsub
midway/seattle
sfrushrkw, sfrushrkwo - Wavenet isn't emulated.
midway/spyhuntertec
spyhuntpr - Very different hardware.
midway/vegas
sf2049te and clone - Voodoo 3-based, one step beyond the Voodoo Banshee problems.
midway/williams
defndjeu, tornado2 - Bad dumps.
miltonbradley/vectrex
raaspec - Timings and mandatory artwork missing.
mips/mips
rc3230, rs3230 -
misc/39in1
19in1, 48in1 and clones, 60in1, fruitwld and clone, jumanji, plutus, pokrwild, rodent - Should be correctly decrypted but expect something different from the CPLD.
4in1a, 4in1b - These have been decrypted, currently boot but stuck at 'Hardware Check' with an error. Need adjusting of the cpld_*() methods.
misc/3do
Emulation is still preliminary. Needs DSPP core properly hooked up (should be similar if not same to the one used by the later Konami M2 HW).
misc/4enlinea
Needs proper UM487F device emulation. CPU logic seems quite off.
misc/4enraya
strker - Stops with 'RAM no good' message.
misc/acefruit
acefruit - Inputs aren't fully understood. Video in bonus game needs fixing.
starspnr - Most likely needs a redump of the program ROMs.
misc/amaticmg
Emulation of the type 2 and 3 boards is preliminary, thus only suprstar (board type 1) kinda works, though it errors out when inserting coins.
misc/amerihok
Preliminary driver. Mechanical / screenless system. Uses a Z8 based MCU.
misc/ampoker2
arizna10 - Undumped PIC provides protection. Currently can't exit operator mode to get in game.
ampkr2jsp, ampkr2jspa -
misc/amuzy
Skeleton-ish. H8/3007 CPU (internal ROM apparently not used), barely documented Yamaha YGV625 sprite processor and CRTC and OKI M9810 for sound.
misc/anes
Blitter is imperfectly emulated, but games can be played.
misc/arachnid
Mechanical game. Needs artwork with lamps support.
misc/artmagic
shtstar - Runs on different hardware. Also needs correct "CPU code".
misc/avt
Needs CTC and daisy-chain.
misc/bingor
Protection problems? Video hardware don't make much sense.
misc/blitz68k
Cadillac Jack sets - These games freeze while trying to print the redemption tickets. Also need the MCU dumped and emulated, since they currently relay on ROM patches to bypass the checks.
The other games - Undumped MCUs.
misc/buster
Skeleton driver.
misc/calomega
comg123, comg164, comg187, comg214, comg227, comg230 - Bad/incomplete dumps.
misc/carrera
alantin, bsebmanbl, bsebmanbl2, drkseal - Need correct inputs.
ncarrera - Needs MCU dump.
misc/cb2001
Incomplete decryption.
misc/changyu
Lots of not utilized ROMs.
changyu - MCU isn't hooked up yet.
misc/chsuper
losttrea - Inputs need verifying, probably playable apart from that.
misc/coinmstr
pokeroul, supnudg2 - Incomplete protection simulation.
trailblz - Question ROMs aren't dumped.
misc/coinmvga
Touch screen needs to be hooked up. GFX problems.
misc/crospuzl
Dies at POST with a SPU error.
misc/crystal
donghaer, maldaiza - Protection PIC hasn't been dumped yet.
officeye - Protection PICs have been dumped but there isn't a pic16c727 core yet. Simulation is quite good, but there is still some instability.
wulybuly -
misc/dgpix
btplay2k, letsdnce - Timing problems.
misc/drdmania
Darts machine with video. Z80 based. One ROM dump is bad.
misc/dwarfd
qc, quarterh and clones - Missing laserdisc dumps.
misc/ecoinf2
Skeleton driver for fruit machine games.
misc/ecoinf3
Skeleton driver for fruit machine games.
misc/ecoinfr
Skeleton driver for fruit machine games.
misc/epos
catapult, revenger - Bad dumps.
misc/esd16
fantstry and clone - Playable, but no sound because of an undumped PIC.
misc/esh
LD TROUBLE appears at POST. Sync/timing issue? Performance spike after some time of gameplay, CPU comms gets corrupt?
misc/eva
Preliminary driver. TMS 1000 / COP420 based.
misc/ez2d
Possibly bad BIOS dump.
misc/fastinvaders
Games reset. Schematics are available.
misc/freekick
countrun - Main program inside of custom CPU block.
countrunb2 - Possible bad dump, or encrypted.
misc/fresh
Preliminary driver. M68000 based.
misc/funkball
Preliminary driver. PC based hardware (Cyrix GX + 3DFX).
misc/gambl186
Missing At89c52 dump. EEPROM behaviour still buggy.
misc/gameace
hotbody2 - Program ROM isn't dumped.
misc/gammagic
Both games are missing M68K ROM dumps.
99bottles - Likely bad CD dump.
gammagic - Hangs after "ignoring write to swapbufferCMD when CMDFIFO is enabled" message.
misc/gamtor
Skeleton driver for fruit machine games.
misc/gi6809
Needs discovering the proper way to tie PIA's signals to Microprocessor's IRQs and coin in device support.
misc/gms
ballch, cots, sc2in1, sscs, super555 - Hang while booting, patched for now.
magslot, sc2in1 - Need correct GFX decode for 1st layer.
rbmk - 89C51 MCU isn't correctly hooked up yet.
rbspm - 89C51 MCU isn't correctly hooked up yet. PIC16F84 is dumped but MAME doesn't have a CPU core for it.
ssanguoj - Undumped 89C51 MCU.
misc/goldngam
Preliminary driver.
misc/goldnpkr
falcnwldc - Main CPU / MCU communications aren't correctly implemented yet.
goldnpkd - You always get a winning flush. Unemulated protection?
maxidpkr - Undumped 68705P5 MCU.
olym65bj, olym65wc - Encryption only partially beaten, also need a R6511 CPU core.
wldwitchb, wldwitche, wtchjackh -
pokerdub - Missing one program ROM.
witchcdk - A ROM is corrupt.
misc/gsspade
Mechanical redemption game? Only the sound board CPU ROM is dumped.
misc/hideseek
Missing the internal ROM dump of the HD64F7045F28 main CPU.
misc/highvdeo
bingopd, cuncino, grancapi, magicbom, newtiger, saladue and clone, zoomania and clone - Need correct / verified inputs.
unksmk - Doesn't respond to inputs. Protected.
misc/hitpoker
Protection: needs dumping or simulating PIC.
misc/hotstuff
Preliminary driver.
misc/intrscti
Undumped program ROM in an epoxy block.
misc/island
Unemulated features of the DS80C320 CPU and preliminary driver.
misc/istellar
Laserdisc game. Missing a disc dump.
misc/jackpool
Needs better understanding of the master/slave communications, better EEPROM and NVRAM hook-up.
misc/jackpot
Missing master unit comms (for game override?); loads of unused GFXs, irq and NMI in work RAM space; glitches in attract, service and D-Up screens (requires an NMI mask?); palette, RAMDAC?; complete I/O, identify chip type(s); EEPROM defaults (needs to be initialized in service mode for proper operation).
misc/jokrwild
Missing random number generator, inputs and sound.
misc/joystand
Sticker machine which needs camera, printer and light pen support to be useable.
misc/jungleyo
With a clean NVRAM MAME needs to be soft reset after init or the game will trip a '1111 exception' (caused by invalid opcode executed at 0x102, incomplete decryption most likely); likewise anything in the 0x100-0x1f7 range doesn't seem valid at all; the game sometimes expects 1+ coins even if player has available points (and freezing with "COIN" text blinking), very unlikely to be intended behaviour?
misc/kingpin
dealracl - Partially a bad dump and / or wrong ROM loading.
misc/laz_aftrshok
Mechanical game, needs controls simulation.
misc/laz_ribrak
awetoss - Mechanical game, needs controls simulation.
misc/magic10
hotslot, magic102 and clone, mcolors, mcolorsa, suprpool - Missing dump of the internal ROM of the HD6473308cp10.
misc/magicard
belslots, hotslots, magicle, quingo - Fail on I2C BUS ERROR - protection device missing.
bigdeal0 - Locks with 68070 continually executing address error exception.
dallaspk - Requires protection device (serial port ?).
magicard -
kajotcrd - Gets stuck during initialisation.
magicrd1a, magicrd1b, magicrd1d -
magicrde, magicrdea - Alarm when credit is added and credit is then cleared.
magicrdec - Fails on "OUT OF RANGE ERROR".
magicrdj, magicrdja - Fail on "ERROR IN SETTINGS".
simpbest - Undumped MCU controls winning percentage.
misc/magictg
Preliminary driver, almost works.
misc/malzak
malzak, malzak2 - Sprite collision detection doesn't fully work.
misc/marywu
misc/matrix
Game ROMs are encrypted (preliminary decryption to be checked), may require a missing boot device;
misc/mcm70
At power on need to press START to use; missing cassette (x2) handling, MCP-132 printer/plotter device (Diablo HyType I) emulation, serial communications interface unit (terminal and modem ports).
misc/menghong
HY04 protection needs simulation (controls tile RNG at very least and possibly colors). EEPROM isn't hooked up yet.
misc/microbox2
Missing WD2123 device (dual channel 8251A) implementation.
misc/miniboy7
bejpoker, sminiboy - Missing inputs: HOLD 1 and SMALL.
misc/mirderby
Preliminary sprites and scrolling.
misc/multfish
crzmon2 and clones, rollfr_5 - Not decrypted yet.
misc/multfish_boot
igromult, igromula - GFX ROMs aren't dumped.
misc/neoprint
Needs implementation of the remaining video features and sound interface. Inputs are bare bones and need extra work. Needs simulation of the printer/camera devices, lamps. Upd4990a returns 4 years less than expected.
misc/nibble
Skeleton-ish. Unidentified CPU (possibly TMS9900).
misc/norautp
bjpoker, kimblz80, pma -
dphl, dphla, dphljp, drhl, drhla, gtipoker, kimbldhl, newhilop, smshilo, ssjkrpkr - Missing interrupts for I8080 CPU.
fastdrwp, dphlunka, dphlunkb - Hardware unknown.
noraut3a, noraut3b - Incomplete inputs / some strange behaviour.
norautu, unkljfpk - Encrypted.
norautua, norautub - Decryption incomplete. They run but have strange behaviour.
tpoker2 - Missing 68705 MCU dump / simulation.
misc/notechan
Very preliminary driver. Screenless system. Z80 + M6295 based.
misc/nsmpoker
Preliminary driver.
misc/oneshot
maddonnab - No program ROMs on this set. GFX have misplaced tiles when used with other program ROMs, so this is a different license / revision.
misc/pasha2
zdrum - Coins don't work, inputs incomplete, seems to trip some unimplemented / buggy behaviour of the Hyperstone core. Also needs hard disk dump and MP3 board emulation.
misc/piggypass
Redemption games. Mechanical.
misc/pntnpuzl
Skeleton-ish.
misc/poker72
Doesn't get in game, only test screens seem to work.
misc/quizpun2
quizpun, quizpun2 - Protection MCUs have been dumped and hooked up, but the driver still needs some work.
misc/rfslots8085
bformula2 - Bad dump.
misc/rfslotsmcs48
ajofrin, babyfrts25 - Bad dumps.
misc/rgum
Stuck at the play screen with 'attendere' (wait) message after coining up.
misc/sanremo
roadstar - Possibly different I/O map.
misc/sfbonus
amclink - "Game" function unknown.
version4 and clones - Incomplete dumps.
misc/skeetsht
Preliminary driver.
misc/skylncr
bdream97 - The inputs tend to act out of control at many times. This may have to do with the large number of unknown reads and writes to an I/O port at $66.
blshark - Protected or maybe incomplete decryption.
miaction, tigerslt - Preliminary emulation.
olymp, speedway - Decryption probably incomplete.
seadevil - Needs correct GFX ROM loading / decoding.
score5, spcliner - Palette doesn't work, so MAME only shows a black screen, even while you can hear the game running.
sonikfig - Once coined, there's no way to start a game.
speedwaya - Decryption should be good but it doesn't boot.
misc/smsmcorp
trvhanga - Missing questions ROMs.
misc/ssingles
atamanot - Needs a trojan, in order to understand how the protection really works.
misc/statriv2
cs1_ssp and later versions - Laserdisc games in need of laserdisc dump.
nsupertr3 - Some questions don't display correctly.
quaquiz2 - No inputs, needs nvram.
bbchall, statriv5se, supertr - Questions' ROMs aren't dumped.
misc/su2000
Preliminary driver.
misc/summit
Needs inputs, prom decode, sound, artwork (lamps), probably some irq masking and the like.
misc/tecnodar
Darts game. Mechanical part isn't simulated.
misc/tmspoker
Preliminary driver.
misc/triplex
Missing OMTI 5200 controller board emulation (floppy) and needs dump of the keyboard MCU and implementation of the full keyboard, with mouse.
misc/triton
Cassette interface isn't emulated.
misc/trucocl
You can't coin-up after first game over.
misc/unkpoker
I8085 based. Gets stuck if a coin isn't inserted at boot.
misc/vamphalf
misncrft and clone, worldadv - They start to stall for several seconds at a time after they've been running for a certain amount of time
mrkickera - If you allow EEPROM saving, then this set corrupts the EEPROM and then won't boot.
yorijori - Currently needs a ROM patch to work.
misc/vcombat
Partially working driver. Most of the memory maps for all four CPUs are complete.
misc/videosaa
jokrlady, paradar, scratch, toureiff, winner - Undumped main CPU ROM.
misc/vlc
Video section isn't emulated. Also needs security PAL U35 decoding, In/Out interface Board communication (included mechanical METER + some switch Door open, etc..), JCM Bill acceptor communication (probably ID-003 protocol), printer communication (Star Printer ).
misc/vocalizer
Extensive TODO at the top of the driver.
misc/voyager
PC hardware. Preliminary driver.
misc/vpoker
Needs 6840PTM hook-up, I/Os and sound emulation.
misc/wildpkr
Preliminary driver. Needs memory map improvements, ACRTC support, GFX decode and sound support.
misc/xtom3d
PC based (Celeron + 3DFX). Very preliminary.
mit/tx0
mits/altair
Preliminary driver.
mits/mits680b
Skeleton-ish. M6800 based.
mitsubishi/multi16
mitsubishi/multi8
morrow/microdec
Floppy doesn't work and timer chip isn't hooked up.
morrow/mpz80
morrow/tricep
Preliminary driver. MC68451 MMU isn't emulated.
motorola/m6805evs
Skeleton driver.
motorola/mvme162
M68040 based. Extensive TODO at the top of the driver.
mr/sshot
mr/subhuntr
s2650 based. Driver is skeleton-ish.
msx/msx2
' fsa1fm - Modem not emulated, firmware partially working.
hbg900p and clones - RS232 not communicating.
hx23f and clones - Firmware goes into an infinite loop on the title screen.
hx33 - Half the pixels are missing in the firmware?
mbh70 - How to enter/use the firmware?
mpc27 - Light pen not emulated.
nms8260 -
victhc95 and clones - 2nd cpu/turbo not emulated, firmware won't start.
y503iiir and clones, y805128r2, y805128r2e - Network not implemented.
y805128, y805256 - Floppy support broken.
msx/msx2p
expert3i, expert3t, expertac, expertdx - Some hardware not emulated.
msx/msxtr
sfg extensions may not work due to irq callbacks being registered with the Z80 only; v9958 commands seem to execute too fast (several software items hang because of this); midi interface operation on fsa1gt needs verifying, needs implementation of DAC/PCM related hardware/filter and hook up to the S1990; microphone input is missing-
multitech/mkit09
multitech/mpf1
cs113
mupid/mdisk
It boots from floppy, so presumably only needs an emulated main system to work.
mupid/mupid2
Skeletonish. Z80 based.
nakajima/nakajies
Banking not fully understood, keyboard communications are partially hacked and misses PCMCIA slot.
namco/20pacgal
25pacman - Newer set on slightly different hardware.
namco/cswat
The game utilizes a projector. Can it be simulated with external artwork? Interrupts need to be improved.
namco/gal3
In need of laserdisc dump. Skeleton driver.
namco/namcona1
bbbingo, bbbingot, zelos, zelost - Medal games with main - satellites setup. Communications need emulating.
namco/namcond1
gynotai - Ball sensors aren't understood.
namco/namcos10
ballpom, ippo2, keroro, medalnt and clone, medalnt2, nflclsfb, puzzball and clone, sekaikh, sugorotc - Need additional I/Os emulated.
gegemdb, kd2001, slotouji - Not decrypted yet.
pacmball, sekaikha - Bad dumps.
taiko2, taiko3, taiko4, taiko5, taiko6, taikort - Small timing issues.
namco/namcos11
fambowl - Needs additional I/O board emulation.
namco/namcos12
sws2000, sws2001 - DMA problems.
tektagtjb, tektagtja - Bad / incomplete dumps.
namco/namcos21_c67
aircombj, aircombu - No polygons displayed.
cybsled and clone, solvalou - They crash.
namco/namcos21_de
driveyes - Uses 3 screens with dedicated board for each.
namco/namcos22
dirtdash - Bad dump.
ridgeracf - Incomplete dump. Very different version.
namco/namcos23
Many aspects of the hardware are not completely understood.
namco/sweetland
Screenless crane machine. Mechanical parts aren't emulated.
nasco/crgolf
mastrglf - There's a custom CPU box, main cpu banking and communications with sub cpu aren't understood. Possibly protected.
nasco/suprgolf
albatross - Missing GFX ROMs dumps.
natsemi/icm3216
Missing configurable ram size (1M, 2M, 4M, 8M), iop and scsi, cpu timing and minibus.
natsemi/sys16
Fails some diagnostic tests. Needs implementing of gpib, printer ports, sio/disk/tape boards.
ncd/ncd68k
Preliminary driver. MC68020 based.
ncd/ncdmips
Preliminary driver. MIPS based.
ncd/ncdppc
Preliminary driver. Power PC based.
nec/apc
Several major features still unimplemented, available software doesn't make use of them.
nec/bungo
Dump is incomplete and components are guessed as there's no documentation.
nec/pc100
nec/pc6001
Undumped MCU dump (i8049, controls tape and keyboard). We currently hack tape loading to directly inject contents directly into RAM, would be hairy to support without the actual dump.
Needs daisy chain support for all connected devices that can send an irq event, emulation suffers from irq miscatches especially from keyboard and timer.
FDC is unemulated (unknown part #), it also diverges between pc6001 and pc6601.
Video chip is a M5C6847P-1, a derivative of MC6847, later pc6001mk2 uses a(n unknown part #) superset with black instead of green as typical background pen and a new "Mode 5" gfx, which can do nasty mid-scanline effects (cfr. Tiny Xevious Mk 2, where it draws score display portion with different mode than gameplay).
pc6001mk2 also has a μpd7552 voice chip, unemulated (cfr. Chrith Ai no Tabidachi / クリス 愛の旅立ち intro)
pc6001sr is yet again a superset of the older HWs, no way to surpass the initial PC-6001MK2SR World screen (again irq misfire off the bat?).
nec/pc8001
Very preliminary emulation. Big TODO at the top of the driver.
nec/pc8401a
nec/pc8801
nec/pc88va
pc88va jumps off the weeds with two bogus opcodes (noted in source)
pc88va2 no SW loads up due of missing μpd71071 DMA demand mode (required by the FDC device).
Unemulated plain PC8801 compatibility mode.
nec/pc9801
Extensive TODO list on top of driver.
nec/pc9801_epson
Extensive TODO list on top of driver.
nec/pc9821
Extensive TODO list on top of driver.
nec/pc98ha
Extensive TODO list on top of driver.
nec/pcfx
Needs front panel and storager emulation. Currently there's no disk controller, so only possible to boot into the monitor.
nec/tk80bs
neogeo/neogeo
kog - Bootleg with different protection.
mvstemp - Development board. Unemulated.
sbp - Possibly protected.
stakwindev - Development board. Has battery-backed SRAMs for some of the program, which makes it likely impossible to emulate as the content of the SRAMs is lost due to dead battery.
neogeo/neogeocd
next/next
nichibutsu/cclimber
bagmanf - Bootleg on different hardware.
nichibutsu/galivan
youmab, youmab2 - Weird bootlegs, they have logic issues (always invincible, power ups can be freely selected).
nichibutsu/hrdvd
Implementation of DVD routing and YUV decoding is missing. MPEG chip is only stubbed for now.
csplayh1 - runs on Super CD HW, Inputs don't work at all, slower than the others too.
nichibutsu/nbmj8688
nightlov - Input problems.
nichibutsu/nbmj8891
hnageman, hnxmasev - Missing VHS dump.
nichibutsu/nbmj8991
av2mj1bb, av2mj2rg - Missing VHS dump.
nichibutsu/nichild
ldquiz4, shabdama - Miss laserdisc dumps. Preliminary driver.
nichibutsu/nightgal
sexygal, sgaltrop, sweetgal - Missing protection simulation.
nintendo/aleck64
mtetrisc - Uses additional 2d sprite overlay for tetrominoes gfxs, mostly working minus gfx decoding itself.
nintendo/cham24
Missing coins and timer due to unemulated Amtel MCU.
nintendo/dkong
dkongjrc, dkongddk - Graphic ROMs not switched.
nintendo/gb
mduckspa - Clone with some differences.
nintendo/gba
robotech - Single game reissue of "Robotech - The Macross Saga (Euro, USA)" on the GBA but with double sized ROM (BIOS replacement in first half?) and other mods. It is unclear how compatible this is with standard hardware.
nintendo/n64
nintendo/n64_gateway
Actual LodgeNet system is not emulated, so the extra controller buttons and other system functions are not implemented.
nintendo/nds
Driver is preliminary. Currently WIP.
nintendo/nes
drpcjr, sb486 - Missing mice, keyboard and floppy drive support.
fctitler - Misses emulation of the switch that selects which boots: builtin vs cart.
nintendo/nes_arcade_bl
Z80 for timer and maybe coinage isn't implemented.
nintendo/nes_clone
Differences from the original hardware aren't emulated yet.
nintendo/nes_m82
Supports up to twelve cartridge slots, currently unimplemented.
nintendo/nes_sh6578
Enhanced SH6578 NES clone hardware. Differences not emulated yet.
nintendo/nes_vt02_vt03
ablping, cbrs8, mc_105te, megapad, protpp, rfcp168, senwld, vdogdeme, vdogdemo, vtboxing, vtpinball - These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.
nintendo/nes_vt09
rbbrite - Possibly different hardware (VT369?).
nintendo/nes_vt32
dgun13201, dgun13202 - These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.
nintendo/nes_vt369_vtunknown
These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.
nintendo/nss
Menu system is only partially understood.
nintendo/sfcbox
Preliminary driver. SNES based.
nintendo/snesb
ffight3b - Protection patched out for now, should be emulated.
nintendo/vboy
nintendo/vt_unknown
Unidentified main CPU. Dump might be bad.
nintendo/vt1682
gm235upc - Needs IO ports on sound CPU side and write access to space for RAM.
intg5410 - Controls not hooked up and sometimes it crashes on game change.
lxts3, njp60in1, unk1682 - Random number generator broken, missing line scroll mode emulation.
wowwg - Needs high colour line mode for main menu.
nix/fitfight
hotmindff - Scrolling offsets + inputs need to be fixed.
nmk/nmk16
firehawkv - Incomplete dump.
powerinsc - Sprites are in a different format which hasn't been decoded yet.
tdragonb2 - Runs too fast. Probably IRQs related.
nokia/dbox
Needs GALs dump / decoding, debug terminal and demuxer work.
nokia/mikromikko2
Computer. 80186 based.
northstar/horizon
olivetti/m20
Needs a proper Z8001 CPU core.
olivetti/m24
olivetti/olivpc1
Keyboard not working yet.
olympia/monzagp
Preliminary driver. Possibly missing a ROM.
olympia/portrait
Lots of GFX problems.
olympia/vega
Controls aren't correctly hooked up and objects aren't properly positioned.
olympiaint/olyboss
Not all programs work. Some floppy problems.
olympiaint/olytext
Skeletonish. Z80 based.
olympiaint/peoplepc
omnibyte/msbc1
orca/zodiack
bounty2 - Different memory map. Probably something in the epoxy module marked "CPU PACKII".
osborne/osbexec
osi/osi
c1pmf -
pacman/pacman
sprglobp2 - Encryption not figured out yet.
pacman/schick
Hack of Pengo. It has been decrypted but there is some additional protection.
palm/palm
Newer models' differences aren't emulated yet.
pc/asst128
A ROM isn't dumped.
pc/at
Assorted PC-AT clones. Only preliminary emulation.
pc/atpci
Pentium and PCI emulation still preliminary.
pc/calchase
calchase - Has mangled Win 98 dump (need to type boot at DOS prompt), in-game sports some video bugs, inputs are sketchy and no steering is implemented.
hostinv - "DISK BOOT FAILURE", trying to save BIOS settings causes black screen (shadow RAM issue), disk dump itself doesn't seem ISO 9660 complaint (protection?)
pc/champ2
Jumps in unpopulated RAM area as soon as it banks (PC=ca029 -> 0000:36AF), area may be multibanked instead.
pc/compc
Preliminary driver. I8088 based. Boots with a timer2 error.
pc/dawg
Fails CPUID, actual Southbridge model unemulated.
pc/ec184x
ec1845 - Differences to the other models aren't emulated yet.
pc/europc
pc/ibmpc
ibm5140 - It doesn't boot.
pc/ibmpcjr
ibmpcjx - Dump is incomplete.
pc/iskr103x
iskr1030 - Keyboard test doesn't pass.
pc/mc1502
pk88 - Missing video and keyboard emulation.
pc/pangofun
pangofun - PC based hardware, possibly bad / incomplete dump.
pc/pc
Generic driver for ibm5150 derived PCs. Most machines' specific details haven't been implemented yet.
pc/pcat_dyn
toursol1 - Protection check hasn't been patched out, like it has in the parent.
pc/pcat_nit
streetg and clones - PC hardware emulation is still incomplete.
pc/przone
Correct motherboard / BIOS hasn't been identified yet, mouse is currently hooked up instead of trackball. Printer error B0 keeps popping in attract/game select.
pc/ps2
pc/sis630
Preliminary driver. Big TODO on top of file.
pc/teradrive
Half PC, half megadrive. Missing the whole megadrive part.
pce/ggconnie
Hardware is PC-Engine Supergrafx based. RTC & hopper not emulated.
pce/paranoia
Jamma interface is not emulated.
pce/tourvis
Lacks complete jamma interface emulation.
philips/cdi
General CDI emulation suffers from incomplete simulation of the SLAVE and CDIC MCUs.
quizardff - Misses MCU dump.
philips/vg5k
1200 bauds cassette doesn't work.
philips/yes
Very preliminary driver. HD6845 drawing not implemented.
phoenix/phoenix
fenix - Bootleg, to be checked closer. Dump is incomplete.
griffono - Hangs during attract mode or after coining up.
pinball/allied
Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.
pinball/by17
Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.
pinball/by35
Pinball hardware. Not playable without mechanical part simulation.
pinball/gp_1
Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.
pinball/gts1
Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.
pinball/icecold
Mechanical arcade games which need simulation of the mechanical part to be playable.
pinball/missamer
Mainly there's no ball physics simulation.
pinball/recel
Pinball games. Preliminary, and the missing simulation of the tables makes them unplayable.
playmark/sderby
croupier and clones, magictch, tropfrt - Protection MCU handles win rates etc. Correct win behavior is critical to this gambling games functioning as expected, so simulation probably doesn't make sense.
poly88/poly88
positron/positron
Computer. MC6809 based. Emulation is very incomplete due to missing info.
psikyo/psikyosh
s1945iiibl,s1945iiibla - Sprites only show up if launched with -debug.
psion/psion
psion1 - Peculiarities of this model aren't emulated.
psion/psion3
Needs emulation of battery backed RAM.
psion/psion3a
Needs emulation of battery backed RAM, sound devices, serial ports and fixing of RAM detection for 3mx.
psion/siena
Needs emulation of battery backed RAM.
psion/workabout
Needs emulation of battery backed RAM.
quantel/dpb7000
Disk Sequencer Card emulation is preliminary.
qume/qvt70
Preliminary emulation. No inputs.
regnecentralen/rc702
Needs floppy emulation to be able to test and emulate more features.
regnecentralen/rc759
Needs better I82730 emulation.
robotron/a5105
There's a hang while scrolling and cassette loading (bit 7 of port 91) needs work.
robotron/a51xx
Skeleton driver. 65C816 based.
robotron/a7150
Needs MMS16 (Multibus clone) and slot devices emulation, native keyboard and more work on the A7100 model.
robotron/k1003
Skeleton driver. I8008 based. Keyboard isn't emulated.
robotron/k8915
Skeleton driver. Z80 based. Chargen ROM isn't dumped.
robotron/rt1715
robotron/z1013
z1013k69, z1013k76, z1013s60 - Hardware differences aren't emulated yet.
robotron/z9001
rockwell/aim65_40
Skeleton driver.
roland/roland_cm32p
Synth. Sound isn't emulated yet.
roland/roland_d10
Expander. Sound isn't emulated yet.
roland/roland_d50
Skeletonish. Synthesizer. UPD78312 based.
roland/roland_d70
roland/roland_mt32
Skeletonish. Expander. P8098 based.
roland/roland_pr100
MIDI sequencer. Needs emulation of the gate arrays.
roland/roland_sc55
Skeletonish. Expander. P8098 based.
roland/roland_sc55mk2
First off it needs a H8/500 series CPU core.
roland/roland_tb303
Bass line. NEC_D650. Sound unemulated (discrete).
roland/roland_tr909
Drum machine. UPD7810. Sound unemulated.
rolm/r9751
sage/sage2
Floppy loading doesn't work.
sanyo/phc25
map1010 - Tape control not implemented yet.
sega/bingoc
bingoc - Needs to be connected to the terminals. Sound banking could be wrong.
sega/chihiro
X-BOX hardware emulation is still preliminary, but some games boot, albeit slowly.
sega/coolridr
aquastge - coin pusher, some video bugs, never completes RAM test, some inputs aren't hooked up.
sega/dc_atomiswave
Most games show something and some are playable, but emulation is still incomplete.
sega/dccons
Dreamcast emulation is preliminary. Big TODO at the top of the driver, not extensively tested.
sega/flashbeats
Preliminary driver. H8/3007 based.
sega/fwheel
Communications with other boards aren't implemented yet, causing missing controls.
sega/gpworld
Laserdisc hardware. Works in theory, but is waiting for a good quality laserdisc dump. Does have a small list of TODO items that could be looked at prior to a disc dump.
sega/hikaru
Skeleton driver.
sega/hshavoc
Genesis hardware, but uses a PIC to control state based encryption. All the code that matches the Megadrive version has been decrypted, but the extra code (startup code, coins etc.) appears to have some annoying extra encryption.
sega/kopunch
Boxing bag game. Sensors aren't emulated, so it isn't "playable".
sega/lindbergh
Skeleton driver. Pentium 4 / Celeron based.
sega/mdconsole
sega/megadriv_acbl
bk3ssrmb - The mechanism to switch between the 2 games hasn't been identified yet.
jparkmb, twinktmb - Undumped PIC controls at least coins and dips. Crude simulation causes problems in detecting coins.
sonic3mb - Undumped PIC.
srssf2mb - Both games seem to expect starting in the 0xf00000 range.
sega/megadriv_rad
ra145 - Bad dump.
sega/megadriv_sunplus_hybrid
SunPlus side isn't hooked up.
sega/megadriv_vt_hybrid
VT side isn't hooked up.
sega/megaplay
mp_bio - Frequently softlocks after continue, usually on the 2nd stage.
mp_shnb3 - Game softlocks if you coin during the intro sequence.
sega/megatech
Incorrect behavior at time out and there are some sms based games which aren't yet fully supported.
sega/model1
netmerc - Guesswork incomplete on the math copro dsp functions and program impossible to dump without decapping.
vf - Collision detection is broken due to imperfect TGP RAM port emulation or hookup.
sega/model2
Implementation of the 3D systems is either guesswork (Model 2, 2A) or incomplete (Model 2B, 2C).
hpyagu98 - Stuck at boot with 'error #1' message.
rascot2 - Probably part of a multiple unit setup (server, terminals, video boards).
sega/model3
Driver is still preliminary. Most games boot and show something.
sega/naomi
Most games show something and some are playable, but emulation is still incomplete.
sega/saturn
sega/sderby2
The video CPUs are waiting for commands from another source. It is assumed that there is at least one other PCB (834-5526?) which drives the video PCBs and perhaps generates sound. The satellite PCB is emulated in sg1000a.cpp.
sega/segaai
Cassette isn't correctly implemented yet.
sega/segaatom
Preliminary driver. H8S/2373 based.
sega/segac2
pclub, pclubj, pclubjv2, pclubjv4, pclubjv5 - Need camera and printer handling.
sega/segafruit
Decryption may still not be 100% correct yet.
sega/segag80r
astrob1 - Dies when you first start.
sega/segahang
endurob2 - Bad dump.
sega/segald
Laserdisc hardware. Has a small list of TODO items that could be looked at prior to a disc dump.
sega/segapico
sega/segapm
Skeleton driver. Sega 32X based.
sega/segas16b
fpointbla - Bootleg with different memory map / registers. Misses bgfx and sprites aren't correctly aligned.
dddoor, wfishing - Needs correct inputs / outputs.
sega/segas18
pontoon, pontoona - Only the terminal is dumped. pontoona might be the main unit, but needs the FD1094 dumped.
sega/segas24
sspirtfc - Missing floppy image.
sega/segas32
as1 - Needs laserdisc dump and emulation.
sega/segasm1
bingpty, carboule - Satellite boards. Need dump of the other boards.
blicks, tinkerbl - Inputs (inserting a coin freezes some of the text on screen).
sega/segasp
Hardware is very similar to naomi, see naomi.cpp. Moreover it needs RFID device emulation.
sega/segaxbd
rascot - Only the terminal is dumped.
sega/segaybd
pdrift and clones - They lock up. TAS opcode related?
sega/sg1000a
sderbys - Satellite board. The main board needs to be dumped. Only partially decrypted.
sderby2s - Satellite board. The main board needs to be dumped. Also inputs aren't hooked up.
sega/shtzone
Gun doesn't work. Actual timer doesn't seem to match what's set by the dips.
sega/sms_bootleg
Missing timer, banking non totally implemented.
sega/speedbsk
speedbsk - Mechanical, extensive TODO at the top of the driver.
sega/stv
choroqhr - One ROM is a bad dump.
decathlt, decathlto - Run very slow and lots of GFX glitches.
dfeverg, fanzonem - Require SH2's SCI serial port emulated, to communicate with coin/medal-related I/O board. dfeverg also is missing a ROM.
finlarch, smleague - Randomly hang / crash. They work with a ridiculous MDRV_INTERLEAVE number, might need strict SH-2 synching.
magzun - I/O errors.
nclubdis - Unemulated security card.
nclubv3, pclub2 and clones, pclub3, pclubpok, stress - Unemulated printer.
sackids - Runs with a dedicated bios which isn't dumped.
sfish2, sfish2j - CD handling broken. Needs MPEG decoder.
twcup98, twsoc98 - Some situations with the GK result in the game stalling.
vfremix - Texture upload issues in some cases, see source.
yattrmnp - Needs emulation of the medal game specific hardware.
sega/svmu
sega/system16
bayrouteb1 - Broken sprites (missing IRQ?).
altbeastbl, altbeastbl2, bayrouteb2, beautyb, bloxeedbl, dduxb1, eswatb1, fpointb1, fpointbj, goldnaxeb1, goldenaxeb2, iqpipe, passshtb, passht4b, shdancbla, shinobld, shinoblda, tturfb1, wb3bb1, wb3bble - Bootlegs on different hardware.
timescanbl - Encrypted.
sega/timetrv
timetrv2 - Needs laserdisc dump for this ROM, which has different frame indexes from the parent.
sega/vicdual
carnivalca - One of the program ROMs need a redump.
invho2a - Bad colors (wrong for Invinco, all black for Head On 2) render the games unplayable. Multiple dump attempts of the color PROM have given the same result.
seibu/airraid
airraid, cshooter - GFX ROMs in black 'blobs'.
seibu/banprestoms
Need emulation of the card printer / dispenser.
seibu/deadang
popnrun and clone - GFX ROMs aren't dumped. They are inside an epoxy block, similar to the Air Raid one.
seibu/legionna
cupsoc and clones - Complex Seibu 'COP' protection device. Most functions have been emulated, but glitches remain which makes games not completely playable.
seibu/panicr
Collision detection is broken.
seibu/raiden_ms
Bootleg on Modular System, heavily modified from the original. V30 based.
seibu/raiden2
zeroteam and clones, xsedae - Complex Seibu COP2 protection + banking (probably linked to the protection).
seibu/seibucats
Needs DVD emulation first, lots more.
seibu/seicupbl
These bootlegs don't have the COP protection of the original. It hasn't been figured out yet how they replace it.
seibu/stfight
cshootert - GFX ROMs are contained in black "blobs" and thus undumped.
sequential/prophet600
seta/macs
macsbios -
mac2bios -
kisekaem -
kisekaeh -
cultname -
seta/namcoeva
Whack-a-mole type games. Inputs aren't emulated yet.
seta/seta
inttoote - Unemulated protection.
zingzipbl - Bootleg on different hardware.
seta/seta2
ablastb - Bootleg on different hardware. At least the "tilemap sprite" y offset flags are different.
namcostr - Bad dump. The game has mechanical parts.
staraudi - Needs flipscreen hooked up properly with new code to function at all.
seta/simple_st0016
dcrown, dcrowna - Slightly different hardware.
mayjinsn -
sfrj/galeb
Cassette isn't working yet.
sfrj/idpartner
Preliminary driver. Z80 based.
sfrj/orao
Cassette isn't working yet.
sfrj/tim011
Skeleton-ish. Z180 based.
sgi/crimson
Skeleton driver. MIPS based
sgi/indy_indigo2
indigo2_4415 - The different hardware isn't emulated yet.
sgi/iris_power
Skeleton driver. MIPS based.
sgi/o2
Skeleton driver. MIPS based.
sgi/octane
Skeleton driver. MIPS based.
sgi/tt
Needs graphics and emulation of the variants.
sharp/fontwriter
Extremely preliminary driver. The M37720 core is missing DMAC support.
sharp/mz2000
sharp/mz6500
sharp/mz700
sharp/pc1500
sharp/pce220
pcg850v -
sharp/pocketc
sharp/x1
sharp/x1twin
sharp/x68k
siemens/pcd
siemens/pcmx2
Personal computer. NS32016 based.
siemens/pg685
Preliminary driver. NEC V20 based.
sigma/sigmab52
s8waysfc -
sigma/sigmab98
dashhero - Does not acknowledge the button bashing correctly.
sinclair/atm
atm -
sinclair/ql
sinclair/scorpion
sinclair/spectrum
sinclair/zx
lambda, pc8300, pow3000 - Fail to show text.
zx97 - Unemulated bankswitching.
skeleton/adacp150p
ASCII printer adapter. Does not do much more than pass the extensive self-test.
skeleton/alphasma
Needs work on ADB and PS/2. The charset ROM is wrong.
skeleton/ax20
Skeleton driver.
skeleton/bert
Preliminary driver. Z8671 based.
skeleton/bitgraph
bitgrphb -
skeleton/bpmmicro
Universal device programmer. 286 based.
skeleton/br8641
Preliminary driver based on guesswork. Needs documentation.
skeleton/busicom
Addition and subtraction do not work.
skeleton/candela
can09 - Preliminary driver: among other things needs keyboard, 6845 CRTC and FDC support.
skeleton/cdc721
Skeleton driver.
skeleton/ckz80
No documentation available, so driver is mostly guesswork. If fdc is enabled in address map, it hangs waiting for a fdc response. Otherwise, it displays an error, and you can press a key to try again.
skeleton/codata
Very preliminary driver.
skeleton/controlid
Fingerprint reader device. Very skeletonish.
skeleton/cortex
Skeleton driver.
skeleton/cp1
skeleton/cxhumax
ROMs are badly dumped / missing.
skeleton/daruma
Printer. Very preliminary driver.
skeleton/datacast
Unimplemented keypad, incomplete SAA5240 emulation.
skeleton/design
Tobacco vending machines. Don't accept coins, possibly because of unemulated coin selectors.
skeleton/digel804
Needs removing of the ACIA hack in digel804_state::acia_command_w, minor finishing touches to i/o map, EPROM socket stuff (ports 0x40, 0x41, 0x42 and 0x47) and artwork.
skeleton/digijet
Engine Control Unit (ECU). Skeleton driver. Uses an I8049.
skeleton/digilog320
Needs finishing floppy hookup; SCC interrupts; unknown DUART inputs/outputs; RS232; RTC; artwork with LEDs.
skeleton/dim68k
Very preliminary driver. Big TODO at the top of the driver.
skeleton/dm7000
Preliminary driver.
skeleton/dsb46
Preliminary driver.
skeleton/dual68
Skeleton driver.
skeleton/epic14e
Misses keyboard emulation.
skeleton/eurit
Preliminary driver. ISDN-Telefon. M37730S2 based.
skeleton/fanucs15
Skeleton driver.
skeleton/fanucspmg
Needs verifying VRAM hookup, hooking up enough keyboard to get it to boot a floppy.
skeleton/fc100
Understand how 600 baud is selected for cassette. Hook up graphics modes and colours. Unknown i/o ports. Needs cart software (current code is just a guess).
skeleton/fk1
Preliminary driver.
skeleton/ft68m
Skeleton driver.
skeleton/grfd2301
Preliminary driver. Dump isn't complete.
skeleton/hazeltin
Preliminary driver.
skeleton/hazl1420
Preliminary driver. Chargen not dumped.
skeleton/hprot1
hprot2r6 - LCD commands are sent, but nothing shows up on screen. Needs ADM695AN emulation.
hprotr8a - Loops during boot displaying an error message related to low power supply voltage. Needs ADM695AN emulation.
skeleton/hudson_poems
Xtensa CPU core isn't complete.
skeleton/i7000
Preliminary driver (NSC800 based).
skeleton/icebox
Z80 based. Floppy drives aren't hooked up. Unknown ports.
skeleton/if800
Skeleton driver. I8086 based.
skeleton/imsai
Banking and dip-switches aren't implemented. I8085 based.
skeleton/indiana
Preliminary driver.
skeleton/itc4
Skeletonish. Temperature controller. Z80 based.
skeleton/itt3030
Keyboard isn't properly hooked up. Other problems at the top of the driver.
skeleton/jade
If you hit a key as soon as it is started, the system will present a prompt and work. Otherwise it runs into the weeds because the ROM banking isn't yet emulated.
skeleton/jonos
Skeleton driver. I8085A based. No info available.
skeleton/juku
Needs display mode 384x200, sound, possibly tape and network. Floppy interface isn't understood, though it works enough with the only disk available.
skeleton/kron
Needs keyboard fixing and understanding how to hook up the real char table.
skeleton/lg_dvd
USB DVD writer. Skeleton driver. MT1839 based.
skeleton/mes
skeleton/mfabfz
Driver still in the early stages of development. No inputs are hooked up.
skeleton/mice
Very preliminary driver. No schematics available.
skeleton/micro20
Skeleton driver. Uses a 68020 and a 68881 FPU.
skeleton/micronic
Needs IR I/O port, LCD contrast and backlight emulation.
skeleton/miniframe
Preliminary driver. M68010 based.
skeleton/ml20
Needs currently unimplemented V25 features (serial, etc.).
skeleton/ms9540
Incomplete dump, no documentation available.
skeleton/mstation
skeleton/mt735
skeleton/mycom
skeleton/onyx
Main screen prints an error with CTC (because there's no clock into it atm). Devices aren't hooked up yet.
skeleton/p8k
skeleton/plan80
Autorepeat on the keyboard is broken. Not all devices have been hooked up.
skeleton/pm68k
skeleton/proteus3
Cassette and keyboard need work.
skeleton/pv9234
skeleton/pwp14
Word processor. Z80 based.
skeleton/qtsbc
skeleton/rd100
No infos available but some PCB pictures. MC6809P based.
skeleton/rvoice
Skeletonish. HD63701Y0 based.
skeleton/sacstate
The weird characters that show on screen are various escape sequences. These are different depending on the terminal type chosen. The codes need to be understood and emulated before this system makes sense.
skeleton/sartorius
Preliminary driver.
skeleton/sb8085
skeleton/sbrain
Keyboard needs improvements, missing expansion bus slot emulation.
skeleton/scopus
Keyboard isn't emulated.
skeleton/shine
Preliminary driver. Everything needs to be verified.
skeleton/sk101bl
Trading terminal. I80C31 based. Preliminary.
skeleton/swyft
skeleton/systec
Skeletonish. Most devices aren't hooked up. Z80 based.
skeleton/tavernie
Incomplete dump. GFX and cassette need fixing.
skeleton/teleray10
Terminal. M6502 based. Preliminary driver.
skeleton/terak
LSI-11 based. Really a skeleton driver, few infos available.
skeleton/testpat
Discrete. Preliminary netlist available.
skeleton/tk635
Undocumented custom chip controls most functions.
skeleton/tsispch
skeleton/tulip1
No 8256A MUART emulation which handles interrupts, timers, serial and parallel interfaces.
skeleton/v6809
skeleton/vector3
Preliminary driver. Extensive TODO on top of the driver.
skeleton/wicat
skeleton/xor100
Cassette and floppy aren't working.
skeleton/zorba
snk/dmndrby
Electrocoin on snk hardware. Needs better video emulation. Enters service mode while attract mode is running.
snk/hng64
ROZ layer rotation not understood, some 3d glitches, several priority issues (i.e. buriki gameplay and attract mode), sams64_2 flickers like mad and "press start button" always displayed in game, racing games uses unemulated network CPU which most likely interferes with logic and currently kludged to work to some extent.
sony/dfs500
Emulation of the video hardware (DSP signal path) for GFX processing is still needed.
sony/news_68k
Needs mouse and keyboard, graphics and slots emulation.
sony/news_r4k
Needs more complete floppy support (only supports floppy boot at the moment), NetBSD SCSI support (mostly/entirely changes needed in the SPIFI driver), parallel I/O, remaining kb/ms support and APbus expansion slots.
sony/psx
sony/pve500
sony/smc777
sony/taitogn
kollon, sianniv - IRQ at the wrong time.
sony/zn
bam2 - Lacks music (which streams from a hard disk under the control of an H8/3644 MCU).
beastrzb - Incomplete dump.
primrag2 - Watchdog reset at startup.
strider and clones - Random hangs / crashes.
stern/cliffhgr
cliffhgra2 - Fails a start up check.
goaltogo - Laserdisc game. Works in theory, but is waiting for a good quality laserdisc dump.
stm/pp
subsino/lastfght
Game speed seems to be completely wrong, timers and player movement too fast?
subsino/subsino
dinofmly and clone - Stop at password check. Probably need a preinitialized NVRAM.
mtrainnv - Subsino sold a "Settings/Clear ROM" for some released titles. These devices are *extremely* expensive (and ultra rare, only sold to big casino corporations), and should be placed in the empty socket to fix a dead board due to NVRAM corruption. A version of Magic Train running on subsino.cpp (unlike mtrain, which is needed to match this program ROM.
ndongmul - Not looked at yet.
grndprix, newhunter, newhunterb, sevenlnd - Tilemaps, lamps and inputs troubles.
newhunterc - Needs correct memory map.
subsino/subsino2
qbeebing, strain, tbonusal, treacity and clone - Possibly missing some protection patches.
queenbee and clones, squeenb - Games run way too fast.
treamary - Gets stuck on CHIP1 test, enters test mode if bypassed.
xplan - Always starts with 4 credits. Interrupts don't seem to work correctly.
sun/sun1
sun/sun2
sun/sun3
sun/sun3x
sun/sun4
suna/suna8
hardhea2b, hardheadb2 - Protected bootlegs on different hardware.
sunelectronics/blockch
Paddle/ball sprite drawing is guessed, video timing is wrong, 2nd irq timing is guessed.
sunelectronics/route16
jongpute - Palette problem makes the tiles difficult to recognize.
vscompmj - Inputs don't seem to work correctly.
synertek/ktm3
Only a few address lines are decoded at all. The resulting mirroring might not be accurately emulated yet.
synertek/mbc020
Computer. M6512 based. Skeletonish driver.
ta/alphatpc16
SCSI emulation is guessed / incomplete.
ta/alphatpx
Preliminary driver. Currently only shows the initial boot message. I8085A based.
tab/tabe22
Needs a dump of the keyboard controller (currently HLE'd), NVRAM / memory layout isn't correct, currently needs a hack to send out data on the RS232 port.
taito/2mindril
Missing working simulation of the sensors. Requires a major rework of the artwork sub-system.
taito/arkanoid
arkatour2 - Undumped MCU.
hexaa - Protection hasn't been figured out yet.
taito/bublbobl
bub8749 - Uses a different MCU, dumped but needs to be hooked up.
taito/cchance
Imperfect hopper emulation makes this game to not coin up and gives "hopper time out errors" when you win.
taito/cpzodiac
Punching bag game with red dot matrix display. Z80 based.
taito/grchamp
grchampa - Uses different ports. Possible bad dump.
taito/gsword
josvolly - Incomplete MCU hook up.
taito/kikikai
mexico86a -
taito/lgp
Laserdisc game. Has a small list of TODO items that could be looked at prior to a disc dump.
taito/marinedt
Collision detection has some problems.
taito/nycaptor
cyclshtg - Missing (protection?) MCU dump.
taito/sbmjb
Needs hopper emulation.
taito/taitoair
ainferno and clone - Missing landing monitor camera (blackened), 3d HUD graphics; expert course has wrong 3d geometry; almost surely crashing during replay has missing smoke effect, looks quite odd atm.
taito/taitojc
dangcurv and clones - DSP bug causes missing 3D. Currently hang after initial tests.
taito/taitopjc
Inconsistent frame rate compared to PCB recordings; game has a tendency to freeze frame hiccup.
taito/taitotx
Preliminary driver. PC based.
taito/taitotz
Preliminary driver.
taito/taitowlf
Missing coin inputs.
taito/taito_f2
footchmpbl - Bootleg on different hardware. It has very different hardware registers.
taito/taito_f3
bubsymphb, bubsymphba - Bootleg on different hardware. Backgrounds don't show up. Seems to make a different use of priority RAM.
taito/taito_o
Driver still in preliminary stages. TODO: inputs (coins), NVRAM, sprite priorities, dips, interrupts (sources).
taito/wgp
Recently demoted to not working status.
tandberg/tdv2324
I8085A based. CPU gets stuck reading i/o port 0x30 in a loop.
tangerine/alphatan
Unemulated SAA5070 device.
tatsumi/kingdrby
cowrace - Incomplete dump.
tatsumi/tatsumi
Very complex GFX hardware hasn't been fully emulated yet.
tch/wheelfir
Games suffer from heavy glitching. Some are also incomplete prototypes.
teamconcepts/comquest
Skeleton driver.
technos/ddragon
ddragon6809, ddragon6809a - Bootlegs on different hardware, encrypted.
tecmo/gaiden
mastninj - Sprites, sound and y-scroll need fixing.
tecmo/tehkanwc
tehkanwcc - Bootleg with different inputs.
tektronix/tek405x
tektronix/tek410x
tektronix/tek440x
tektronix/tekigw
Needs am9516 dma controller, slots and cards, gpib devices, graphics and keyboard.
telercas/tmc1800
osc1000, tmc1800 - No ROM dump available.
telercas/tmc2000e
televideo/ts803
televideo/tv912
Terminal. I8035 based.
televideo/tv950
Keyboard isn't working properly.
televideo/tv955
Terminal. M65C02 based.
tesla/ondra
Cassette isn't working yet.
tesla/pmd85
tesla/sapi1
sapizps3 and clones - They try to read a disk and stop responding after showing the logo.
thepit/thepit
theportr - Wrong colors render the games unplayable. The PCB has the PROM for The Pit, colors confirmed the same on PCB and in emulation. Bootlegger or operator error in fitting the wrong PROM?
zaryavos - Incomplete dump.
ti/exelv
EXL 100 cannot be emulated because the ROMs are not dumped. EXELTEL stops early in the boot process and displays a red error screen, presumably because the I/O processor is not emulated.
ti/ti85
ti73b, ti83, ti83p and clones, ti83pse and clones, ti84p and clones, ti84pse and clones - Emulation of these models hasn't been started yet.
ti/ti931
Preliminary driver. Z80 based.
ti/ti990_10
ti/ti990_4
tigertel/gizmondo
Preliminary driver.
toaplan/slapfght
tigerhb4 - 68705 MCU has been dumped, but not hooked up yet.
toaplan/toaplan2
nprobowl, probowl2 - Mechanical part isn't simulated.
pipibibsbl2 - Bootleg on different hardware.
toshiba/paso1600
Chargen and kanji ROM aren't dumped. FDC isn't identified (missing software anyway).
toshiba/pasopia
Missing emulation of the FDC and other I/O expansions.
toshiba/pasopia7
trainer/dolphunk
It is not possible to save / load programs.
trainer/pro80
Missing interrupt emulation, cassette load needs fixing.
trainer/tk80
ics8080 - Keyboard problems.
trs/dgn_beta
Machine never boots.
trs/lnw80
Floppies don't work.
trs/max80
Computer. Z80 based. Currently stuck because floppy reading fails.
trs/radionic
Tape and floppy support are problematic.
trs/tandy2k
trs/trs80
all sets but trs80 - Most floppies don't boot (regression).
trs/trs80m2
trs/trs80m3
cp500, trs80m3 - Most floppies don't boot (regression).
trs80m4 - Boots model 3 floppies, but not model 4 ones.
trs80m4p - Completely different memory map.
tvgames/elan_eu3a05
airblsjs, buzztime, pvmilfin - Preliminary emulation.
carlecfg - Unimplemented GFX modes, big GFX glitches.
pvwwcas - Controls aren't working yet.
rad_tetr - Player 2 inputs don't work.
sudoelan - Might be slightly different hardware.
tvgames/elan_eu3a14
Preliminary driver.
tvgames/generalplus_gpl16250_nand
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/generalplus_gpl16250_rom
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/generalplus_gpl16250_romram
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/generalplus_gpl16250_spi
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/generalplus_gpl16250_spi_direct
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/generalplus_gpl162xx_lcdtype
bkid218, pcp8718, pcp8728 - Menus aren't working properly yet.
tvgames/generalplus_gpl32612
Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.
tvgames/spg110
Preliminary driver. Sunplus SPG110 based.
tvgames/spg29x
Need the internal ROM dump.
tvgames/spg2xx
ablkickb, abltenni, ordentv, rad_crik, rad_fb2, rad_sktv, tiktokmm, tvsprt10, vtechtvs, wfcentro - Inputs aren't hooked up correctly.
guitarfv - Timer issues make the music way too slow.
jouet - ROM checksum fails, but is expecting 0 as a result? Shows 'CopyRight' when booting normally? Protection?
tvgames/spg2xx_digimake
Camera and touchpad unemulated.
tvgames/spg2xx_ican
icanguit - Data saving doesn't work.
tvgames/spg2xx_jakks_gkr
jak_sdoo - Possibly a CPU bug causing some minigame to fail.
tvgames/spg2xx_jakks_tvtouch
Touchpad not emulated.
tvgames/spg2xx_senca
mywicodx, zon32bit - Banking not understood.
tvgames/spg2xx_skannerztv
Inputs aren't hooked up correctly.
tvgames/spg2xx_smarttv
tvgames/spg2xx_telestory
Sound data for the narrator is written to the SIO data port, which currently isn't implemented.
tvgames/spg2xx_tvgogo
Camera not implemented.
tvgames/spg2xx_wiwi
Inputs aren't hooked up correctly.
tvgames/st2302u_bbl_spi
ST2302U based. Emulation is preliminary.
bbl380 - Missing internal ROM dump.
tvgames/trkfldch
Preliminary driver. G65816 with custom vector?
tvgames/xavix
Preliminary emulation. Most games are not working, some have additional hardware on the PCB.
tvgames/xavix_2000
Preliminary emulation. Most games are not working, some have additional hardware on the PCB.
tvgames/xavix_2002
Preliminary emulation. Most games are not working, some have additional hardware on the PCB.
tvgames/xavix2
SoC emulation is very preliminary.
ultimachine/rambo
ultratec/minicom
unisys/univac
universal/docastle
asoccer, idsoccera, idsoccert - See MT05419.
universal/superdq
Laserdisc games. Works in theory, but is waiting for a good quality laserdisc dump.
usp/patinho_feio
ussr/argo
Needs devices hook-up and cassette UART on ports C1 and C3.
ussr/b2m
Preliminary driver. FDC support is broken, among other problems.
ussr/bk
bk0010 - Error message at start. Thrown into monitor.
bk0010fd - Continually reboots. The system expects a ROM at A000.
bk0011m - Black screen at start, differences with the other systems in the driver aren't emulated.
ussr/cm1800
Peripherals aren't hooked up.
ussr/dvk_kcgd
Needs a K1801VM2 CPU core (interrupts and EVNT pin, full EIS set, other insns).
ussr/irisha
Preliminary driver. I8080 based.
ussr/istrebiteli
motogonki - Preliminary. Shows something on screen.
ussr/mikro80
Cassette save produces incorrect signal.
ussr/mk85
Skeleton-ish. K1801VM2 based.
ussr/mk90
ussr/ms6102
DMA problems, keyboard not emulated.
ussr/okean240
Very preliminary. Needs memory banking, floppy and cassettes, etc.
ussr/partner
ussr/pk32
ussr/pk8000
pk8002 -
ussr/pk8020
bk8t - Keyboard not working, stuck at a "config" screen.
kontur - Needs to boot from a floppy and there isn't one available that works.
korvet - Can boot CP/M, but the keyboard then doesn't work.
neiva - Keyboard not working.
ussr/sm1800
ussr/special
anakonda - It complains of a disk problem (not emulated).
erik - Should have colour and floppy disks, unknown how to access them. No disk software available.
lik Space and < keys not working.
pioner - Not all keys have been found (Function keys, Left-arrow, more?). Monitor ROMs missing, used ones from "special".
kharkovsky, specialm, specialp -
specimx - Machine tends to crash/freeze internally after a while.
unga - If you enter SYSTEM to exit basic, it corrupts itself and runs into the weeds. At the initial prompt, if you hit Enter it jumps to 0000 and thence into the weeds.
ussr/uknc
ussr/vector06
ussr/vta2000
Missing inputs.
videoton/tvc
UPM crashes when formatting a floppy.
votrax/votrhv
hc120 - Inputs are incomplete.
vsystem/f1gp
f1gpb - Steering wheel isn't correctly calibrated.
f1gpbl - Bootleg on different hardware.
vsystem/gstriker
gstriker and clones - Several GFX features aren't emulated yet, making the game almost unplayable.
vgoalsoc, vgoalsoca - Tecmo MCU providing jump addresses etc. Has direct access to entire CPU bus, prevents code modification (MCU writes 'ROM ERROR' if you change ROM). ROZ pitch difficult to understand.
vsystem/rpunch
svolleybl - Bootleg on different hardware (video registers are changed).
vtech/clickstart
Preliminary driver. UNSP based.
vtech/geniusiq
iq128, iq128_fr, iqtv512 - Very preliminary driver.
vtech/laser3k
Keyboard is only partially emulated, misses RGB graphics mode emulation, FDC C800 page appears to be inside the FDC cartridge (a dump is needed). Also misses Centronics printer port and cassette emulation.
vtech/lcmate2
RTC doesn't remember the time, alarm doesn't work and Reset/On button needs to be added.
vtech/pc1000
vtech/pc2000
Z80 based.
vtech/pc4
vtech/prestige
Needs better IRQ timing, the mouse is too slow and sometime freezes, the memory banking isn't entirely understood, cartridges need to be implemented.
vtech/primusex
vtech/socrates
Extensive TODO at the top of the driver.
vtech/vsmileb
Improper handling of the "Fast Rampdown" feature in the SPG2xx audio device causes bad narration.
vtech/vtech1
vz200de - Not dumped yet.
wavemate/bullet
Memory banking is broken.
wavemate/jupiter
Preliminary driver. Devices aren't connected yet.
wicat/t7000
Missing cursor display and attributes.
wing/lucky74
excitbj - The program ROM for the terminal isn't dumped.
lucky74b - The program ROM seems incomplete or encrypted in some smart way.
wing/pinkiri8
Current blocker is the video emulation i/o ports, it looks somewhat exotic.
wing/slotcarn
Missing proper colors and reel support.
wing/superwng
Crashes after bonus stage, see notes, bad ROM?
wyse/wy60
Currently uses a bunch of hacks due to missing features in MAME's 8051 CPU core.
wyse/wy85
xerox/bigbord2
Main problem is floppy disk support is missing.
xerox/xerox820
bigboard, mk82, x820ii - Floppies don't work.
mk83, mojmikro, x168 - Slightly different hardware.
yamaha/tg100
Unemulated H8/520 CPU.
yamaha/yman1x
Control Synthesizer. Skeleton driver. HD6413002FP16 based.
yamaha/ymmu100
Missing a lot of effects.
yamaha/ymmu128
H8 core serial communication problems.
yamaha/ymmu15
yamaha/ymmu5
Very preliminary driver.
yamaha/ymmu80
Missing a lot of effects.
yamaha/ymmu90
Missing analog inputs.
yamaha/ympsr340
Preliminary driver. Exact CPU model unknown. Front panel / keyboard scanner and sound generation aren't emulated.
yamaha/ympsr400
Missing HD63B05V0D73P dump.
yamaha/ymqs300
yamaha/ymqy70
Preliminary driver.
yamaha/ymvl1
TMP68301 emulation of the serial comms isn't good enough.
yamaha/ymvl70
Missing a lot of effects.
zaccaria/seabattl
seabattla - Different hardware, needs emulation of its peculiarities.
zvt/pp01
Interrupt controller isn't emulated and cassette support is untested.