MNW

This page is designed to allow for a quick look over all the drivers with a MACHINE_NOT_WORKING flag by giving, as much as possible, an idea on the amount of effort needed to fix them.

20pacgal

25pacman - Newer set on slightly different hardware.

24cdjuke

Skeleton driver for a CD Juke Box.

2mindril

Missing working simulation of the sensors. Requires a major rework of the artwork sub-system.

39in1

All games but 39in1 - Games other than 39in1 on this hardware have substantially harder protection and are double-encrypted in a way that would be very difficult to emulate.

3do

Emulation is stil preliminary. Current stall point is unemulated DSPP core.

4dpi

Skeleton driver.

4enlinea

Needs proper UM487F device emulation. CPU logic seems quite off.

4roses

Skeleton driver. The games' program rom is encrypted and they have an undumped MCU which needs decapping or simulation.

8080bw

invasionrz and clone - Bootlegs on slightly different hardware.

sisv1 - Some ROMs aren't dumped.

aa310

Floppies don't work, there are unimplemented copro instructions and possibly still some ARM core bugs.

a5105

There's a hang while scrolling and cassette loading (bit 7 of port 91) needs work.

a51xx

Skeleton driver. 65C816 based.

a7150

Needs MMS16 (Multibus clone) and slot devices emulation, native keyboard and more work on the A7100 model.

abc1600

TODOs are short/long reset (RSTBUT), CIO, hard disk and connect RS-232 port A.

accomm

Skeletonish.

acefruit

acefruit - Inputs aren't fully understood. Video in bonus game needs fixing.

starspnr - Most likely needs a redump of the program ROMs.

acommand

acommand - Inputs aren't fully understood. Requires a major rework of the artwork sub-system. Needs to be merged with cischeat.cpp driver.

acvirus

80C5xx + dsp56k based. Skeletonish.

adp

Driver seems almost complete, still marked as not working.

agat

Similar to Apple II (same bus architecture, keyboard and floppy interface), but video controller is completely different.

agat9 - Needs memory banking. Extensive todo at the top of the driver.

aim65_40

Skeleton driver.

airraid

airraid, cshooter - GFX roms in black 'blobs'.

aleck64

mtetrisc - Uses additional 2d sprite overlay for tetrominoes gfxs, mostly working minus gfx decoding itself.

alesis

The driver seems quite flashed out, but has no notes on what's missing.

alg

Laserdisc games. They all work in theory, but are waiting for a good quality laserdisc dump.

alien

Skeleton driver (SH4 based system). Has 2 MPEG2 decoder chips.

allied

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

alpha68k

goldmedb - It uses a 68705 in place of the Alpha controller.

sbasebalj - MCU simulation is inaccurate / unverified.

alphasma

Needs work on ADB and PS/2. The charset ROM is wrong.

alphatpx

Preliminary driver. Currently only shows the initial boot message. I8085A based.

altair

Preliminary driver.

altos486

Still very incomplete.

altos5

When running MP/M, dir command crashes the system.

altos6800

i8086 based. Driver is currently WIP.

amaticmg

Emulation of the type 2 and 3 boards is preliminary, thus only suprstar (board type 1) works.

amerihok

Preliminary driver. Mechanical / screenless system. Uses a Z8 based MCU.

amiga

Amiga chips emulation lacks a lot of features.

amstr_pc

The driver seems quite flashed out, but has no notes on what's missing.

amust

Lots of work still needed. Lacks software to further improve emulation.

anes

ROM banking isn't done yet. Blitter isn't emulated so nothing gets shown on screen.

apc

Extensive TODO list at the top of the driver.

apollo

dn5500, dsp5500, dn5500_19i - Newer models aren't fully emulated yet.

apple2

space84 - Clone on different hardware.

apple2e

apple2cp - Upgrade on different hardware.

mprof3, prav8c - Clones on different hardware.

apple2gs

apple2gsr3p - A rom isn't dumped.

apricotf

Needs CTC/SIO interrupt acknowledge, CTC clocks and sound emulation.

apricotp

Needs devices, LCD and sound hook-ups.

arachnid

Mechanical game. Needs artwork with lamps support.

arcadia

mratlus, plldium, polyvcg, trakcvg -

argo

Needs devices hook-up and cassette UART on ports C1 and C3.

aristmk4

86lions - Runs on earlier, slightly different hardware.

clkwise - Needs redump of the program ROMs.

aristmk5

Hardware differences from the base Acorn Archimedes are not fully understood yet.

aristmk6

Skeleton driver. System is SH4 based.

arkanoid

hexaa - Protection hasn't been figured out yet.

arsystems

ar_dart2 - Bad dump.

artmagic

shtstar - Runs on different hardware.

asst128

A ROM isn't dumped.

astrcorp

astoneag, dinodino, hacher, westvent, winbingo, winbingoa, zoo - These games need decryption.

astrocde

tenpindx - This game used a physical hockey puck which the player slid down the bowling alley. Sensors on the other end picked up the location and velocity of the puck and simulated the pin behavior. Requires simulation of this input interface in order to be considered working.

at

Assorted PC-AT clones. Only preliminary emulation.

atari_s1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

atari_s2

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

atari400

a1200xl - Bad dump.

a65xea, a130xe -

atarigx2

All of these games suffer from some advanced protection that affects them in different ways. Through some magic accesses in memory, data can be decrypted using some special key sequences that are not entirely understood. It's possible to find all possible data sources, run them through the decryption process on the real PCB, and then encode that information in the driver, and for some of the games it has been done. Only rrreveng and clones are missing.

rrreveng and clones - Unemulated protection. It's possible the same method used to break Moto Frenzy's protection could be used.

atarist

Emulation still preliminary. TODO is on top of the source file.

atlantis

The Zeus2 video chip needs more work.

atm

Banking issues.

atpci

Pentium and PCI emulation still preliminar.

atvtrack

Preliminary driver.

avt

Needs CTC and daisy-chain.

ax20

Skeleton driver.

b16

No documentation available, system boots only after some debugger trickery.

badlands

badlandsb, badlandsb2 - These bootlegs runs on heavily modified hardware.

banctec

Preliminary driver.

bartop52

Coins and timer were handled by Bartop system bios. Since bios dump is not available, regular Atari 5200 bios is used and game is marked as not working. Game cart is also marked as bad dump as it is done in "console style", i.e. one file for all game data.

bbc

torchh10, torchh21, abc110, acw443, abc310, reutapm, bbcmaiv, bbcm512, bbcmarm, discmate, cfa3000, econx25 - All have different hardware combinations which aren't implemented yet.

bcs3

Cassette isn't working.

bfcobra

beeline - Missing floppy disk image.

inquiztr - Missing floppy disk image.

bfmsys85

Fruit machine hardware. Skeleton driver.

bfm_sc1

Fruit machine hardware. Skeleton driver.

bfm_sc2

m_bcgslm, m_brkfst and clones, m_bfocus, m_cpeno1, m_luvjob - Mechanical games imported from AgeMame. The fruit machine games don't work either.

quintond - Missing emulation of RS232 data link device (see BACTA Datapak specs for more info).

bfm_sc4

Fruit machine hardware. Most games pass the startup tests.

bigbord2

Main problem is floppy disk support is missing.

binbug

Cassette doesn't work.

bingoc

Missing terminal roms. Sound banking could be wrong.

bingor

Protection problems?

bishi

dobouchn - Hangs during ram / rom check.

bitgraph

bitgrphb -

bk

bk0010fd, bk0011m - Preliminary driver.

blitz68k

cjffruit - The game freezes while trying to print the redemption tickets.

The other games - Undumpable MCUs.

bmjr

Cassette doesn't work, break key is unemulated, basic works only with a workaround.

bntyhunt

Preliminary driver. PC hardware. Bios is undumped.

bpmmicro

Universal device programmer. 286 based.

br8641

Preliminary driver based on guesswork. Needs documentation.

btime

tisland - Needs to be decrypted.

bullet

Memory banking is broken.

busicom

Preliminary driver.

buster

Skeleton driver.

bwidow

bwidowp - Prototype on different hardware.

by17

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

byvid

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

c10

Driver currently gets to a loop where it waits for an interrupt.

c65

Preliminary driver.

cabaret

Not fully playable because of some pitfalls.

calchase

calchase, hostinv - These games almost work.

calomega

Some bad/incomplete dumps and some hardware features are not correctly emulated.

canon_s80

Skeleton driver.

casloopy

Missing bios dump.

cat

Big TODO at the top of the driver.

cb2001

Encrypted CPU.

cbm2

bx256hp, cbm730 - The i8088 board isn't emulated yet.

cbm720_de - Missing chargen dump.

cchance

Imperfect hopper emulation makes this game to not coin up and gives "hopper time out errors" when you win.

cclimber

bagmanf - Bootleg on different hardware.

ccs2810

Floppy implementation needs work.

cdc721

Skeleton driver.

cdi

General CDI emulation suffers from incomplete simulation of the SLAVE and CDIC MCUs. ' quizard4, quizard4_40, quizard4_41, quizard3_34, quizard3_32 - The protection hasn't been completely beaten yet. A MCU for quizard4 has been dumped, but needs proper hook-up.

centiped

magworma - Service mode works, game does not.

multiped - Program bankswitch and alternate memory map layout for centiped.

cesclass

Needs custom layout for dual LCDs, artwork and lamps position needed to make progresses, U43 and U44 bad in Trap Shoot Classic, games are incredibly sluggish, irq sources are unknown, Trap Shoot Classic runs on a single LCD, needs mod.

cfx9850

Preliminary driver.

cgc7900

Skeleton driver.

cham24

Missing coins and timer due to unemulated Amtel MCU.

champbas

tbasebal - M68705 MCU isn't emulated yet.

chessmst

chessmst, chessmstd -

chessmsta - Figure out why it won't work, for starters it assumes z80 carry flag is set at poweron?

chesstrv

Needs emulation of the 3870 MCU in the F8 core, including timer interrupt that is used by the Boris Diplomat.

chexx

Electro-mechanical bubble hockey games.

chihiro

X-BOX hardware emulation is still preliminary, but some games boot, albeit slowly.

cischeat

wildplt - Busted timings.

cliffhgr

goaltogo - Laserdisc game. Works in theory, but is waiting for a good quality laserdisc dump.

cmi

MASTER 'TIM' test fails. LGTST 'TIM' test is out of tolerance without 6840 hack.

cmmb

Banking not understood.

cntsteer

cntsteer - Needs better understanding of the communications and correct ROZ layer implementation.

gekitsui, zerotrgt and clone - Need better ROZ layer implementation.

cobra

Complicated Konami 3D hardware. Bujutsu works a bit better.

cocoloco

cocolocob - It resets after drawing the maze, and when starting a game

codata

Preliminary driver.

coinmstr

pokeroul, supnudg2 - Incomplete protection simulation.

trailblz - Question roms aren't dumped.

coinmvga

Interrupt generation is unknown and touch screen needs to be hooked up.

combatsc

bootcamp, bootcampa, combatscj, combatsct - Trackball isn't correctly emulated.

comebaby

Skeleton driver. Game runs on a Pentium (I/II/III?) class machine running Windows 98.

compc

Preliminary driver. I8088 based. Boots with a timer2 error.

compucolor

ROMs are badly dumped. Needs floppy hook-up.

comquest

Skeleton driver.

controlid

Fingerprint reader device. Very skeletonish.

coolridr

aquastge - coin pusher.

cops

Preliminary driver. Laserdisc game.

cortex

Skeleton driver.

cp1

Skeleton driver.

cps1

sf2amf, sf2rk, sf2stt - Missing program ROMs dump.

craft

Preliminary driver.

crgolf

mastrglf - There's a custom CPU box. Possibly protected.

crystal

crospuzl - It's not clear how the cf card is hooked up.

crzyddz2, menghong - Protection PIC hasn't been dumped yet and, even if the check is bypassed, they try to load files that don't exist on the flash card.

donghaer - Protection PIC hasn't been dumped yet.

officeye - Protection PICs have been dumped but there isn't a pic16c727 core yet. Simulation is quite good, but there is still some instability.

csplayh5

Needs fixes for h8 CPU core bugs (it trips various unhandled opcodes); implementation of DVD routing and YUV decoding; game timings seem busted, could be due of missing DVD hook-up.

csplayh1 - Inputs doesn't work at all, slower than the others too.

cswat

The game utilizes a projector. Can it be simulated with external artwork? Interrupts need to be improved.

cubo

lsrquiz - no player 2 inputs (ingame), wrong pitch for most gfxs.

lsrquiz2 - wrong pitch for some gfxs, crashes during gameplay.

odeontw2 -

cv1k

mmmbanc - Needs touch screen emulation.

cxhumax

ROMs are badly dumped / missing.

czk80

No documentation available, so driver is mostly guesswork. If fdc is enabled in address map, it hangs waiting for a fdc response. Otherwise, it displays an error, and you can press a key to try again.

d6809

Most devices aren't hooked up. Skeletonish.

daruma

Printer. Very preliminary driver.

datum

The basic machine is fully emulated as per the schematic, but still marked not working until the ROM can be confirmed as ok.

dbox

Needs GALs dump / decoding, debug terminal and demuxer work.

dccons

Dreamcast emulation is preliminary. Big TODO at the top of the driver.

dct11em

Skeleton driver.

ddenlovr

momotaro - Protection + some roms are badly dumped.

quizchq, quizchql - They lock up.

ddragon

ddragon2j - Bad dump.

ddragon6809, ddragon6809a - Bootlegs on different hardware, encrypted.

dec0

automat, secretab - Bootlegs on different hardware.

ffantasybl - Hangs after killing Lamia. Might have to do with the M68705 MCU, which isn't dumped.

dec8

ghostb3a - The game hangs as gameplay starts. ROMs confirmed working on PCB, confirmed problem with the fake MCU ROM.

deco32

gunhard, lockload, lockloadu -

deco_ld

The driver needs better video e I/O emulation, laserdisc hook-ups.

dectalk

Extensive TODO at the top of the driver.

defender

defenderj - A program ROM is a bad dump.

deshoros

Needs graphics emulation through artwork system and printer emulation.

didact

can09 - Preliminary driver: among other things needs keyboard, 6845 CRTC and FDC support.

digel804

Needs removing of the ACIA hack in digel804_state::acia_command_w, minor finishing touches to i/o map, EPROM socket stuff (ports 0x40, 0x41, 0x42 and 0x47) and artwork.

digijet

Engine Control Unit (ECU). Skeleton driver. Uses an I8049.

dim68k

Very preliminary driver. Big TODO at the top of the driver.

djmain

popnstage - Only the hard disk is dumped. Missing all ROM dumps.

dlair

Laserdisc games. Work in theory, but waiting for a good quality laserdisc dump.

dm7000

Preliminary driver.

dmax8000

Needs parallel port, centronics port, AUX serial port and FDC/FDD/HD setup.

dmndrby

Electrocoin on snk hardware. Needs better video emulation. Enters service mode while attract mode is running.

dms5000

Skeleton driver.

dms86

Preliminary driver.

dragon

dragon200e - Possibly MC6847 issue.

drw80pkr

Driver shows something, but emulation is still incomplete. I8039 based CPU with CRTC6845 video and AY8910 sound.

dsb46

Preliminary driver.

dual68

Skeleton driver.

dvk_kcgd

Needs a K1801VM2 CPU core (interrupts and EVNT pin, full EIS set, other insns).

dwarfd

qc, quarterh and clones - Missing laserdisc dumps.

dynax

majrjhdx, ougonpai, ougonpaib, tenkai2b - Missing dump of the internal rom of the TMP91640.

ec184x

ec1840, ec1845, ec1847 -

ec65

Preliminary driver.

ecoinf2

Skeleton driver for fruit machine games.

ecoinf3

Skeleton driver for fruit machine games.

ecoinfr

Skeleton driver for fruit machine games.

einstein

einst256 - BIOS is a bad dump.

electron

Missing floppy disk support.

elektronmono

MCF5206E based. Skeletonish.

enmirage

Preliminary driver.

epos

catapult, revenger - Bad dumps.

esh

LD TROUBLE appears at POST. Sync/timing issue? Performance spike after some time of gameplay, CPU comms gets corrupt?

esqasr

Skeleton driver.

esqmr

Skeleton driver.

eva

Preliminary driver. TMS 1000 / COP420 based.

evmbug

Skeleton driver.

exelv

EXL 100 cannot be emulated because the ROMs are not dumped. EXELTEL stops early in the boot process and displays a red error screen, presumably because the I/O processor is not emulated.

f-32

royalpk2 - Doesn't progress past the boot screen.

f1gp

f1gpb - Bootleg on different hardware.

fanucs15

Skeleton driver.

fanucspmg

Needs verifying VRAM hookup, hooking up enough keyboard to get it to boot a floppy.

fastinvaders

Games reset. Schematics are available.

fc100

Understand how 600 baud is selected for cassette. Hook up graphics modes and colours. Unknown i/o ports. Needs cart software (current code is just a guess).

fccpu30

Crashes during boot.

fcrash

dinopic2, knightsb - Bootleg on different hardware.

fidel6502

fphantom - Preliminary driver.

fidelz80

bridgec3, vbrc - The card scanner isn't emulated.

firebeat

Driver is incomplete. Missing MIDI card emulation, video emulation problems..

fitfight

hotmindff - Scrolling offsets + inputs need to be fixed.

fk1

Preliminary driver.

flicker

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

fm7

fm11, fm16beta, fm7740sx - Extra features not implemented.

fmtowns

Video emulation is far from complete.

fontwriter

Extremely preliminary driver. The M37720 core is missing DMAC support.

fortecar

fortecar - Requires a proper EEPROM dump, doesn't start due of it.

fp1100

IRQs aren't emulated, cassette, FDC and keyboard don't work.

fp200

Video emulation is preliminary.

fp6000

Preliminary driver. FDC and keyboard don't work.

freekick

countrun - Main program inside of custom CPU block.

countrb2 - Possible bad dump, or encrypted.

fresh

Preliminary driver. M68000 based.

fruitpc

gogostrk - PC based hardware. Preliminary driver.

ft68m

Skeleton driver.

funkball

Preliminary driver. PC based hardware (Cyrix GX + 3DFX).

funworld

fw_a7_11, fw_a7_11a, fw_a0_1, intrgmes - Different hardware, to be reverse engineered.

jokercrd - Totaly encrypted. This game use a Funworld custom CPU.

jolycdab - Program is testing/writing RAM in offset $8800-$BFFF (ROM).

jolyjokrc - Bad program ROM.

multiwin - Encrypted with unidentified CPU.

megamc3, powercrd - Needs proper decryption.

royalcrdf - Encrypted. Seems to use an epoxy block with CPU + extras (ICs, TTL, etc) to manage the encryption.

royalcrd_msx , royalcrd_nes - Stealth games.

saloon - This game is totally encrypted. No PIAs to drive I/O.

g627

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

gaelco2

grtesoro, grtesoro4 - Unemulated protection device with internal rom and suicide capabilities (DS5002FP). grtesoro also has badly dumped program roms.

gaiden

mastninj - Sprites, sound and y-scroll need fixing.

gal3

In need of laserdisc dump. Skeleton driver.

galaxian

dingoe - Probable bad dump and encryption.

jungsub - Encrypted program ROMs and one bad GFX ROM.

monsterz - Unemulated protection.

ncentury, scrammr - Stuck at boot. IRQ isn't enabled correctly. Protected?

skelagon, supergx - Bad dumps.

tenspot - Menu isn't working yet.

warofbugg - Bootleg on slightly different hardware.

galaxold

ckongcv, ckongis, guttanggt - Bootleg on different hardware.

spcwarp - Bad dump.

trvchlng - Questions roms aren't dumped.

galivan

dangarj - Sprites aren't visible.

youmab, youmab2 - Weird bootlegs, who knows.

galpani2

Kaneko protection MCU with internal rom, managing CPU comms. Decap should possible, should be the same for all games / sets.

gambl186

Missing At89c52 dump. EEPROM behaviour still buggy.

gamecom

There are cpu and system problems that prevent the games from working fully.

gamecstl

'Modern' PC Hardware running a MAME bootleg.

gameking

Gameking3 bios needs dumping. Bankswitching and exceptions need to be worked out.

gamtor

Skeleton driver for fruit machine games.

geniusiq

iq128, iq128_fr, iqtv512 - Very preliminary driver.

genpc

xtvga -

ggconnie

Preliminary driver. Hardware is PC-Engine based.

giclassic

Preliminary driver.

gizmondo

Preliminary driver.

gkigt

Preliminary driver for slot machine hardware. I960 based.

glasgow

dallas, dallas16, dallas32, roma, roma32 - Incomplete emulation.

goldngam

Preliminary driver.

goldnpkr

animpkr, animpkra - Banking needs work and there's probably an address scramble.

bchancep, bchanceq - Runs on older, slightly different hardware.

falcnwldc - Has a second encrypted CPU.

pokerdub - Missing one program ROM.

pokerduc - Encrypted.

pokersis - Banking isn't correct.

super98 - Program checks zeropage registers for changes.

wldwitchb, wldwitche, wtchjackc -

witchcdk - A rom is corrupt.

goldstar

aplan - Game code seems similart to cmast99, but shifted around. Correct ROM loading needed.

bonusch, chryangla, cmtetrsb, jkrmast, luckylad - Encrypted.

cb3c - Bad dump.

cherry96 - Different hardware.

cmast97 - PROM decode needs fixing.

cmast99, cmast99b - The game appears to be stuck in a loop resetting itself after initialising NVRAM.

chryangl -

cmast92, fb2010 - Graphics ROMs aren't dumped yet.

cmasterbv, cmv4a - Missing switch between normal and "stealth" game.

cmtetrsa - Banking not understood.

luckybar - mc68705 MCU.

magoddsc, magoddsd - Custom encrypted CPU block.

mbs2euro - Needs more work in memory map, inputs, and reels alignment.

megaline -

nfm - Some roms don't seem to belong to the dumped set.

pkrmast, prkmasta - Incomplete dumps and probably encrypted.

roypok96c -

super9 - GFXs aren't decoded yet.

wcat3 -

wcherry - Only preliminary work has been done.

gp_1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

gp_2

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

gp2x

Skeleton driver.

gp32

Driver is quite advanced, but isn't fully working yet.

gpworld

Laserdisc hardware. Works in theory, but is waiting for a good quality laserdisc dump. Does have a small list of TODO items that could be looked at prior to a disc dump.

grfd2301

Preliminary driver. Dump isn't complete.

gstriker

gstriker and clones - Several GFX features aren't emulated yet, making the game almost unplayable.

vgoalsoc, vgoalsoca Tecmo MCU providing jump addresses etc. Has direct access to entire CPU bus, prevents code modification (MCU writes 'ROM ERROR' if you change ROM). ROZ pitch difficult to understand.

gticlub

thunderh and clone - They use an additional top board for sound, network and analog control functions.

gts1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

guab

crisscrs - Missing disk image dump.

gumbo

mspuzzlen - Bad dump.

gunpey

GFX compression format not figured out yet. Game otherwise playable.

h8

Cassette isn't working.

h89

Skeleton driver.

hankin

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

harddriv

steeltalp, hdrivairp - Prototypes, possibly running on slightly different hardware.

hazeltin

Preliminary driver.

hh_hcms40

gckong - random lockups (tap the jump button repeatedly): mcu stack overflow, works ok if stack levels is increased, 38800 B rev. has more stack levels? Or it could be a race condition: irq happening too late/early.

sag_si2 - Suspected bad dump.

hh_pic16

pabball, uspbball - Preliminary drivers.

hh_sm510

tgaiden - lcd segments aren't identified yet.

hh_tms1k

stopthiefp - Unable to start a game.

bship and clone, elecbowl - As far as MAME is concerned, the game is emulated fine. But for it to be playable, it requires interaction with other, unemulatable, things (eg. game board/pieces, playing cards, pen & paper, etc).

hideseek

Missing the internal ROM dump of the HD64F7045F28 main CPU.

highvdeo

grancapi, magicbom - Only preliminary work has been done.

hikaru

Skeleton driver.

hitpoker

Protection: needs dumping or simulating PIC.

hng64

The I/O CPU is a protected MCU. There is some thought that the games uses this as a protection device. See driver notes for in depth todo/status report.

homedata

mirderby - Preliminary driver. Might be protected.

homelab

Preliminary driver. Cassette support needs to be fixed, among other things.

horizon

Skeleton driver.

hornet

sscope, sscopea, sscope2 -

terabrst, terabrsta - Missing gun emulation.

hotstuff

Preliminary driver.

hp16500

Preliminary driver.

hp48

hp39g -

hp49gp

Preliminary driver.

hp9k

Boot tests fail.

hp9k_3xx

Preliminary driver.

hprot1

hprot2r6 - LCD commands are sent, but nothing shows up on screen. Needs ADM695AN emulation.

hprotr8a - Loops during boot displaying an error message related to low power supply voltage. Needs ADM695AN emulation.

hpz80unk

Skeleton driver. Needs banking and peripherals support.

hshavoc

Genesis hardware, but uses a PIC to control state based encryption. All the code that matches the Megadrive version has been decrypted, but the extra code (startup code, coins etc.) appears to have some annoying extra encryption.

hunter2

Preliminary driver. Without software to test it, it's difficult to progress with the emulation.

hx20

Needs emulation of: keyboard interrupt, LCD controller, serial, SW6 read, RS-232, microcassette, printer, ROM cartridge, floppy TF-20, barcode reader. Might need a M6800 core rewrite.

hyperscan

Needs the internal ROM dump.

i7000

Preliminary driver (NSC800 based).

ibmpc

ibm5140 - It doesn't boot.

ibmpcjr

ibmpcjx - Dump is incomplete.

icecold

Mechanical arcade games which need simulation of the mechanical part to be playable.

ichiban

Code is encrypted.

if800

Skeleton driver. I8086 based.

igs011

drgnwrldv40k - Need proper decryption and protection handling.

igs017

iqblocka, iqblockf, mgcs, lhzb2, slqz2, spkrform - Incomplete protection simulation.

tarzan, tarzana, starzan - Incomplete dumps.

tarzanc - Decryption is incomplete.

igspoker

kungfu, stellecu - Bad / incomplete dump.

imds

Skeleton driver. I8080 based.

imsai

Banking and dip-switches aren't implemented. I8085 based.

inder

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

indiana

Preliminary driver.

indigo

Skeleton driver.

indy_indigo2

Needs at least the folllowing fixes: tod clock set problem, NVRAM saving and SCSI DMA to handle chains properly.

interpro

Preliminary driver.

intrscti

Undumped program ROM in an epoxy block.

intv

intvkbd - Has additional components / devices (i.e. tape) which aren't emulated.

ipc

ipc - Dump incomplete.

ipds

Skeleton driver. I8085A based.

iris3130

Missing keyboard, mouse, graphics and mass storage hook ups.

irisha

Preliminary driver. I8080 based.

ironhors

farwest - Bootleg running on different hardware.

isbc

rpc86, isbc86, isbc8605, isbc8630, isbc286 - Preliminary driver 8086 / 286 based.

iskr103x

iskr1030 - Keyboard test doesn't pass.

istellar

Laserdisc game. Has a small list of TODO items that could be looked at prior to a disc dump.

itech8

stratabs - Controls aren't hooked up.

itt3030

Keyboard isn't properly hooked up. Other problems at the top of the driver.

jack

striv - Resets after displaying the first question. A couple of ROMs may be bad (fixed bits).

jackpool

Needs better understanding of the master/slave communications, better EEPROM and NVRAM hook-up.

jade

Skeleton driver. Z80 based. No info available.

jaguar

jaguar, jaguarcd - Currently the driver is geared toward supporting the cojag arcade games. Jaguar console support is very poor, most games aren't properly playable or have severe performance issues or crashes related to the unsafe blitter code.

jangou

luckygrl - Encrypted program roms. Might also be in the wrong driver.

jokrwild

Missing random number generator, inputs and sound.

jonos

Skeleton driver. I8085A based. No info available.

joystand

Sticker machine which needs camera, printer and light pen support to be useable.

jp

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

jpmimpct

buzzundr, monspdr, snlad, tqst - Incomplete dumps.

jpmimpctsw

The mechanical games aren't emulated yet.

jpmsys5

cashcade - Incomplete dump? Shows a loading error.

jpmsys5sw

The mechanical games aren't emulated yet.

jr200

Wrong timings. Also needs a MN1544 4-bit CPU core and ROM dump.

jtc

Preliminary driver. UB8830D based.

jungleyo

Skeleton driver. Program ROMs possibly encrypted.

jupiter

Preliminary driver. Devices aren't connected yet.

k1003

Skeleton driver. I8008 based. Keyboard isn't emulated.

k8915

Skeleton driver. Z80 based. Chargen ROM isn't dumped.

karnov

karnovjbl - Bootleg. Uses a different MCU (NEC D8748HD) which needs simulation or, if possible, dumping.

kaypro

Most machines are incompletely emulated. The problems listed in the driver are:

kaypro1084 - Boots from floppy, but needs hard drive added.

kaypro2x, kaypro4a - Floppy not working.

kayproiip88, kaypro484p88 - Works as a normal Kaypro 4, extra hardware not done.

omni4 - I/O board isn't emulated.

robie - Has twin 2.6MB 5.25 floppy drives which aren't supported, no software available.

kingdrby

cowrace - Incomplete dump.

kinst

kinst2uk - Upgrade kits. They add a small board which isn't emulated.

klax

klax2bl - Bootleg on different hardware.

koftball

Incomplete protection simulation.

konamigv

btchamp, kdeadeye, tmosh and clones - All games on this system suffer from a corner case involving audio track playback in the SCSI CD-ROM emulation.

konamigx

ggreats2, opengolf, opengolf2, racinfrc, racinfrcu - These games use a special ROZ layer generated by the "PSAC4" custom IC which appears to include a height map.

konamim2

Preliminary driver, needs overall better emulation of the M2 system.

konendev

Most dumps are incomplete. Work has been done and at least one romset goes in-game.

konmedal

Preliminary driver. Z80 based.

kopunch

Boxing bag game. Sensors aren't emulated, so it isn't "playable".

kron

Needs keyboard fixing and understanding how to hook up the real char table.

krz2000

TMP68301 based. Skeletonish.

ksys573

Game suffer from incomplete PSX-based hardware emulation and some are missing emulation of the external digital sound and I/O board.

kyocera

pc8201 - Keyboard layout is wrong, floppys aren't hooked up.

npc8300 - Doesn't boot.

laser3k

Keyboard is only partially emulated, misses RGB graphics mode emulation, FDC C800 page appears to be inside the FDC cartridge (a dump is needed). Also misses Centronics printer port and cassette emulation.

laserbat

catnmousa - Bad dump.

lcmate2

RTC doesn't remember the time, alarm doesn't work and Reset/On button needs to be added.

legionna

grainbow and clone, cupsoc and clones - Complex Seibu 'COP' protection device. Most functions have been emulated, but glitches remain which makes games not completely playable.

leland

aafbb - One of the program roms is a bad dump.

lethalj

franticf - Directional inputs don't work yet.

lg_dvd

USB DVD writer. Skeleton driver. MT1839 based.

lgp

Laserdisc game. Has a small list of TODO items that could be looked at prior to a disc dump.

lindbergh

Skeleton driver. Pentium 4 / Celeron based.

lisa

Lisa OS doesn't boot.

llc

llc1 - Bad dump.

lola8a

Preliminary driver. I8085 based.

ltcasino

ltcasinn - Missing inputs.

ltd

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

lucky74

excitbj - The program ROM for the terminal isn't dumped.

lucky74b - The program ROM seems incomplete or encrypted in some smart way.

m10

andromed, greenber, ipminvad1 - Incomplete dumps.

m107

kftgoal, wpksoc - Missing EEPROM hook-up.

m20

Needs a proper Z8001 CPU core.

m52

alpha1v - Slightly different hardware.

m6805evs

Skeleton driver.

m72

lohtb, rtypem82b, rtype2m82b - The bootleg hardware is different to the original hardware.

m79152pc

Skeleton driver. Z80 based.

m92

nbbatman2bl - Bootleg with different sprite system, MCU as soundcpu, OKI samples for music/sound.

macs

macsbios -

mac2bios -

kisekaem -

kisekaeh -

cultname -

magic10

hotslot, magic102, mcolors, suprpool - Missing dump of the internal rom of the HD6473308cp10.

magicard

Lots to do: proper handling of the 68070 (68k with 32 address lines instead of 24) & handle the extra features properly (UART,DMA,Timers etc.), proper emulation of the 66470 Video Chip (still many unhandled features), inputs, unknown sound chip (it's an ADPCM with eight channels), ,any unknown memory maps, proper memory map and machine driver for magicardj & magicle (different sound chip, extra undumped rom and PIC controller).

magictg

Preliminary driver, almost works.

magnum

Preliminary driver. 80186 based.

malzak

malzak, malzak2 - Sprite collision detection doesn't fully work.

manohman

Preliminary driver.

marinedt

Collision detection has some problems.

maygay1b

Mechanical game imported from AGEMAME.

maygayv1

Skeleton driver for fruit machine games.

mcr

nflfoot - CED-based disk game. Has gory Z80-based serial I/O interface that is not understood. The CED player interface is undocumented. A poor quality rip exists of the video (probably the best we will get). There is a second CED disk with different teams playing which we do not have access to.

mediagx

Mainly just need the inputs hooked up, which are mapped to the parallel port via a JAMMA interface

megadriv

dcat16 - Clone hardware with additional features.

megadrvb

sonic2mb - Needs correct coin logic (mcu simulation?).

megaplay

Interaction between BIOS and 68k side is not fully understood. The BIOS often doesn't register that a game has been started and leaves the 'PRESS P1 OR P2 START' message onscreen during gameplay as a result. If this happens, the games usually then crash when you run out of lives as they end up in an unknown state.

megatech

Incorrect behavior at time out and there are some sms based games which aren't yet fully supported.

merit

dodgectya, dodgectyb, dodgectyc - Incomplete dump. One GFX rom is in an epoxy block.

meritm

megat5a - Bad dump.

metalmx

Skeleton driver. Extremely complex prototype hardware.

metro

puzzlet - An unknown unemulated chip (probably a PIC) provides protection.

mfabfz

Driver still in the early stages of development. No inputs are hooked up.

mice

Very preliminary driver. No schematics available.

micro20

Skeleton driver. Uses a 68020 and a 68881 FPU.

midzeus

crusnexo, thegrid and clones - These Zeus II-based games use a proprietary 3D graphics chip that has no available documentation.

miniforce

Very preliminary driver.

miniframe

Preliminary driver. M68010 based.

missile

mcombat, mcombata, mcombats - Bootlegs on different hardware.

missilem - This kit combines Missile Command and Super Missile Attack on ddaughterboard plugged into the main pcb cpu slot.

mitchell

pkladiesbl, pkladiesbl2. - Need CPU "decryption" / ordering. The latter gets a bit furhter.

model1

netmerc, swa, wingwar and clones - Guesswork incomplete on the math copro dsp functions and program impossible to dump.

wingwar360 - Needs emulation of the additional boards needed for the R360. Currently doesn't start, waiting for the safety bar to be lowered.

model2

Implementation of the 3D systems is either guesswork (Model 2, 2A) or incomplete (Model 2B, 2C).

rascot2 - Probably part of a multiple unit setup (server, terminals, video boards).

model3

Driver is still preliminary. Most games boot and show something.

monzagp

Preliminary driver. Possibly missing a rom.

moo

moomesabl - Bootleg on different hardware. Sprite ROMs weren't dumped for this bootleg set.

mpu12wbk

Almost skeleton driver.

mpu3

Most games fail to boot, giving the CPU a 'WAIT' instruction then sitting there; some complain about Characterizer (protection) and then do the same; a few boot to show light displays with no LED text; some display misaligned LED text; many run VERY slowly, even when the CPU is inactive (inefficient MAME timer system overhead?).

mpu4

Fruit machine hardware. Not working yet. Needs artwork.

mpu4plasma

Fruit machine hardware. Not working yet. Needs artwork.

mpu4vid

Needs correct implementation of characteriser protection for each game. BwB games need more work: They have a slightly different 68k memory map. The 6850 is at e00000 and the 6840 is at e01000; they appear to hang on the handshake with the MPU4 board. Needs finding out what causes the games to hang/reset in service mode: probably down to AVDC interrupt timing, there seem to be a number of race conditions re: masks that need sorting out with proper blank handling, etc. Currently using a scanline timer to drive an approximation of the SCN2674 scanline logic, but this is perhaps better served as a proper device. Deal 'Em lockouts vary on certain cabinets (normally connected to AUX2, but not there?). Deal 'Em has bad tiles (apostrophe, logo, bottom corner), black should actually be transparent to give black on green.

mquake

A complete mystery. The existing dumps are 100% confirmed. Test mode works. All remaining code is heavily encrypted. Even the original author of the game doesn't recall any encryption, but it is definitely there. It is not done in software; all unencrypted code has been accounted for.

mrgame

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

ms32

f1superb - The road is always rendered as straight. The game has a road layer and extra roms for it. There is an unknown maths DSP for protection.

mtouchxl

mtchxl5k and clones, mtchxlgld and clone - The security key hasn't been reverse engineered.

multfish

igromult, igromula - GFX ROMs aren't dumped.

mw18w

Mechanical game. Needs artwork and lamps and sensors hook up.

mzr8105

Preliminary driver.

namcond1

abcheck - Controls aren't properly hooked up (two buttons only for 3 players, and only 1 coin slot, mapped as player 2).

namcos10

Incomplete dumps. Hardware has very strange protection.

namcos12

libgrandeja, mdhorse, sws2000, sws2001 - DMA problems.

kaiunqz - Stuck at boot.

tektagtjb, tektagtja - Incomplete dump.

truckk - I/O board is not understood. Detailed notes on top of driver.

namcos2

finalap3bl - Bootleg on different hardware.

namcos21

aircombj, aircombu - No polygons displayed.

driveyes - Uses 3 screens with dedicated board for each.

namcos22

airco22b - boots but missing sprite clear DMA?

alpinesa - There are major GFX problems.

ridgeracf - Incomplete dump. Very different version.

tokyowar - Near invincible tanks.

namcos23

Many aspects of the hardware are not completely understood.

naomi

Most games show something and some are playable, but emulation is still incomplete.

nbmj8688

nightlov - Input problems.

nbmj8891

hnageman, hnxmasev - Missing VHS dump.

nbmj8991

av2mj1bb, av2mj2rg - Missing VHS dump.

nbmj9195

shabdama - Misses laserdisc dump.

nc

nc200 - Boot hangs while checking the MC146818 UIP (update in progress) bit.

nds

Driver is preliminary. Currently WIP.

nemesis

bubsys - Unidentified and undumped Fujitsu MCU provides code snippets.

neodrvr

kog - Bootleg with different protection.

sbp - Possibly protected.

neoprint

Needs implementation of the remaining video features and sound interface. Inputs are bare bones and need extra work. Needs simulation of the printer/camera devices, lamps. Upd4990a returns 4 years less than expected.

neptunp2

Skeleton driver. Missing GFX ROMs dump.

nes_vt

Extensive todo on top of the driver. This NES clones have modified hardware.

nightgal

sexygal, sgaltrop, sweetgal - Missing protection simulation.

nmk16

atombjt - Bootleg with different GFX and sound hardware.

firehawkv - Incomplete dump.

norautp

dphl, dphla, dphljp, drhl, drhla, gtipoker, kimbldhl, newhilop, smshilo, ssjkrpkr - Missing interrupts for I8080 CPU.

bjpoker, kimblz80, noraut3a, noraut3b, norautu, norautua, norautub, pma -

fastdrwp, dphlunka, dphlunkb - Hardware unknown.

tpoker2 - Missing 68705 MCU dump / simulation.

notechan

Very preliminary driver. Screenless system. Z80 + M6295 based.

novagf8

Goes bonkers when you press Enter. F8 CPU core bug?

nsm

Skeleton driver. Pinball games.

nsmpoker

Preliminary driver.

nss

Menu system is only partially understood.

nwk-tr

Complex Konami 3D hardware. Only thrilld and thrilldb are considered in playable state.

nycaptor

cyclshtg - Missing (protection?) MCU dump.

okean240

Very preliminary. Needs memory banking, floppy and cassettes, etc.

oneshot

maddonnb - No program roms on this set. GFX have misplaced tiles when used with other program roms, so this is a different license / revision.

onyx

Main screen prints an error with CTC (because there's no clock into it atm). Devices aren't hooked up yet.

otomedius

Skeleton driver. PC hardware.

overdriv

Driver has heavy graphic problems. Missing road (two unemulated K053250).

pacman

clubpacm - Bootleg on different hardware (possibly original codebase). The control multiplex isn't figured out yet.

eyeszac - Bad dump.

pangofun

pangofun - PC based hardware, possibly bad / incomplete dump.

panicr

Collision detection is broken.

paranoia

Jamma interface is not emulated.

pc

Generic driver for ibm5150 derived PCs. Most machines' specific details haven't been implemented yet.

pcat_dyn

Returns CMOS checksum error, can't enter into BIOS setup screens to set that up. Keyboard device problem.

pcat_nit

streetg and clones - PC hardware emulation is still incomplete.

peplus

peke0004, peke0017, pex0006k, pex0013k, pex0013ka -

pemg0025, pemg0026, pemg0182, pemg0183, pemg0213, pemg0252 - Need printer support.

all pepk* sets but pepk1024 -

pepp0021, pepp0596, pepp0598 - Need link support.

pex0489p, pex2474p - Need unknown PE+ GAME POKER program to run.

peyper

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

ator - Incomplete dump.

pg685

Preliminary driver. NEC V20 based.

pgm

dmnfrntpcb, kovlsjb, kovlsjba, kovlsqh, kovlsqh2, kovshp, kovshxas, kovytzy, martmasttw, oldsplus, pgm3in1, puzlstar, py2k2, svgtw - Need internal rom of IGS027A.

drgw2hk - Protections isn't simulated yet.

pgm2

ddpdojh, kov3 and clones - IGS36 internal ROM not dumped yet.

phoenix

fenix - Bootleg, to be checked closer. Dump is incomplete.

griffono - Hangs during attract mode or after coining up.

photoply

FDC error, needs a DASM investigation / work-around.

pinball2k

Preliminary driver. Pinball - video hybrid based on Cyrix MediaGX hardware.

pinkiri8

Current blocker is the video emulation i/o ports, it looks somewhat exotic.

play_1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

play_2

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

play_3

Pinball games. Emulation of most of them is (almost) complete, but the missing simulation of the tables makes them unplayable.

plygonet

Dsp56k CPU emulation needs to be completed. Network interface needs to be worked out.

pntnpuzl

Skeleton-ish.

poker72

Doesn't get in game, only test screens seem to work.

progolf

progolfa -

pwrview

Preliminary driver. I80186 based.

quizpun2

quizpun, quizpun2 - Protection MCUs have been dumped and hooked up, but the driver still needs some work.

quizshow

Missing tape dump and GFX roms need redump.

raiden2

zeroteam and clones, xsedae - Complex Seibu COP2 protection + banking (probably linked to the protection).

rastersp

fbcrazy - Missing hard disk dump at least.

rbmk

Possibly missing MCU dump.

rc702

Needs floppy emulation to be able to test and emulate more features.

redalert

demoneye - Missing 3rd graphic layer making level 2 impossible. Unclear what the layer should show.

rgum

Skeleton driver. There is a Big Black Box in the middle of the PCB (for encryption, or containing roms?).

rm380z

rm480z - Only preliminary work done.

rowamet

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

royalmah

cafebrk, cafedoll, cafepara, jansou, mjvegas - Missing internal program rom.

janoh - Incomplete dump.

janoha -

mjdejavu and clone - Calls by the player don't work.

mjsenka, mjsiyoub -

mjtensin - Random crashes, related to interrupts.

rkjanoh2 - Only preliminary work has been done.

seljan - Slightly different hardware, rom loading probably wrong.

rpunch

svolleybl - Bootleg on different hardware (video registers are changed).

rx78

Inputs might be incorrectly hooked up.

s11

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s3

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s4

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s6

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s6a

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s7

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s8

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s8a

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

s9

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

sbugger

sbugger - Bad dump, different revision to working set.

scobra

rescuefe - Bad / incomplete dump.

scramble

conquer - Bad dump.

sderby

croupier and clone - Protection MCU handles win rates etc. Correct win behavior is critical to this gambling game functioning as expected, so simulation probably doesn't make sense.

sderby2

The video CPUs are waiting for commands from another source. It is assumed that there is at least one other PCB (834-5526?) which drives the video PCBs and perhaps generates sound. The satellite PCB is emulated in sg1000a.cpp.

seabattl

seabattla - Incomplete dump.

seattle

sfrushrkw, sfrushrkwo - Wavenet isn't emulated.

segac2

pclubj, pclubjv2, pclubjv4, pclubjv5 - Need camera and printer handling.

segag80r

astrob1 - Dies when you first start.

segahang

endurob2 - Bad dump.

segald

Laserdisc hardware. Has a small list of TODO items that could be looked at prior to a disc dump.

segam1

Only one of the satellite boards from a much larger system is dumped.

segapm

Skeleton driver. Sega 32X based.

segas16b

fpointbla - Bootleg with different memory map / registers. Misses bgfx and sprites aren't correctly aligned.

segas18

pontoon - Only the terminal is dumped.

segas24

sspirtfc - Missing floppy image.

segasp

Hardware is very similar to naomi, see naomi.cpp. Moreover it needs RFID device emulation.

segaxbd

rascot - Only the terminal is dumped.

seta

inttoote - Unemulated protection.

zingzipbl - Bootleg on different hardware.

seta2

namcostr - Bad dump. The game has mechanical parts.

penbrosk - Bootleg on different hardware: standard 68000 instead of TMP68301 and 4 FPGAs (3 A40MX04 and 1 A54SX16A).

sfbonus

amclink - "Game" function unknown.

version4 and clones - Incomplete dumps.

sfcbox

Preliminary driver. SNES based.

sg1000a

sderby2s - Satellite board. The main board needs to be dumped. Also inputs aren't hooked up.

shootaway2

M37450 core needs on-board timers implemented to go anywhere.

sigmab52

Very preliminary: needs GFX decode, improved memory map, color decode, sound support and inputs.

sigmab98

dashhero - Does not acknowledge the button bashing correctly.

simple_st0016

dcrown, dcrowna - Slightly different hardware.

mayjinsn -

skeetsht

Preliminary driver.

skylncr

bdream97 - The inputs tend to act out of control at many times. This may have to do with the large number of unknown reads and writes to an I/O port at $66.

sonikfig - Once coined, there's no way to start a game.

slotcarn

Missing proper colors and reel support.

smsmcorp

trvhanga - Missing questions roms.

sms_bootleg

Missing timer, banking non totally implemented.

spectra

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

splash

funystrp, puckpepl - Protection, controls eating of dots + other things.

rebus, ringball - Another protected Microhard game.

splus

Driver imported from Agemame. Needs modernisation.

spoker

3super8 - Roms are badly dumped.

ssfindo

tetfight - PS7500 is preliminary. EEPROM write hook up isn't correct, causing incorrect configuration after saving.

ssingles

atamanot - Needs a trojan, in order to understand how the protection really works.

st_mp100

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

statriv2

cs1_ssp and later versions - Laserdisc games in need of laserdisc dump.

nsupertr3 - Some questions don't display correctly.

quaquiz2, tripdraw - No inputs, needs nvram.

bbchall, statriv5se, supertr - Questions' ROMs aren't dumped.

stfight

cshootert - GFX ROMs are contained in black "blobs" and thus undumped.

stv

choroqhr - One ROM is a bad dump.

decathlt, decathlto - The GFX compression chip isn't fully understood yet.

finlarch, smleague - Randomly hang / crash. They work with a ridiculous MDRV_INTERLEAVE number, might need strict SH-2 synching.

magzun - I/O errors.

nclubv3, pclub2 and clones, pclub3, pclubpok, stress - Unemulated printer.

sfish2, sfish2j - CD handling broken. Needs MPEG decoder.

twcup98, twsoc98 - Some situations with the GK result in the game stalling.

vfremix - Texture upload issues in some cases, see source.

su2000

Preliminary driver.

subhuntr

s2650 based. Driver is skeleton-ish.

subsino

mtrainnv Subsino sold a "Settings/Clear ROM" for some released titles. These devices are *extremely* expensive (and ultra rare, only sold to big casino corporations), and should be placed in the empty socket to fix a dead board due to NVRAM corruption. A version of Magic Train running on subsino.cpp (unlike mtrain, which is needed to match this program ROM.

summit

Needs inputs, prom decode, sound, artwork (lamps), probably some irq masking and the like.

suna8

hardheadb2 - Protected bootleg on different hardware.

supercrd

Preliminary driver. Encrypted custom Fun World CPU based on Z80 family, plus 2x 8255 PPI, and YM3812 / Y3014 for sound.

superdq

Laserdisc games. Works in theory, but is waiting for a good quality laserdisc dump.

superwng

Crashes after bonus stage, see notes, bad rom?

suprgolf

albatross - Missing GFX roms dumps.

systec

Skeletonish. Most devices aren't hooked up. Z80 based.

system1

shtngmst - Missing MCU dump.

wboysys2a - Encryption hasn't been broken yet.

system16

bayrouteb1 - Broken sprites (missing IRQ?).

altbeastbl, bayrouteb2, beautyb, dduxb1, eswatb1, fpointb1, fpointbj, goldnaxeb1, goldenaxeb2, iqpipe, passshtb, passht4b, shdancbla, shinobld, shinoblda, tturfb1, wb3bb1, wb3bble - Bootlegs on different hardware.

taito

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

taitoair

ainferno and clone - Missing landing monitor camera (blackened), 3d HUD graphics; expert course has wrong 3d geometry; almost surely crashing during replay has missing smoke effect, looks quite odd atm.

taitogn

sianniv - IRQ at the wrong time.

taitojc

dangcurv and clones - DSP bug causes missing 3D. Currently hang after initial tests.

taitopjc

Preliminary driver

taitotx

Preliminary driver. PC based.

taitotz

Preliminary driver.

taitowlf

Preliminary driver.

taito_f2

footchmpbl - Bootleg on different hardware. It has very different hardware registers.

taito_f3

bubsymphb - Bootleg on different hardware. Backgrounds don't show up.

taito_o

Driver still in preliminary stages. TODO: inputs (coins), NVRAM, sprite priorities, dips, interrupts (sources).

tank8

tank8a, tank8b, tank8c, tank8d - Bad / incomplete dumps.

tasman

Konami GX based PCB for gambling games.

tcl

Skeleton, decryption incomplete.

tehkanwc

tehkanwcc - Bootleg with different inputs.

tetrisp2

nndmseal and clones - Missing camera and printer emulation.

stepstag, step3 - Missing HD dumps.

tg100

Unemulated H8/520 CPU.

thayers

Laserdisc game. Works in theory, but is waiting for a good quality laserdisc dump. Does have a small list of TODO items that could be looked at prior to a disc dump.

thepit

zaryavos - Incomplete dump.

tigeroad

f1dream - Collisions are wrong due to unemulated protection.

timetrv

Needs laserdisc dump. Laserdisc player models used by this game are unemulated.

tmnt

ssridersb - Bootleg on different hardware. Bad dump.

ssriders2 - Bootleg on different hardware.

tmspoker

Preliminary driver.

tourvis

Lacks complete jamma interface emulation.

trackfld

trackfldnz - Bootleg on different hardware.

trs80dt1

Random crashes. Extensive todo list at the top of the driver.

trucocl

You can't coin-up after first game over.

trvmadns

Random hangs, probably due to incorrect question banking.

tv910

Keyboard isn't working properly.

tv950

Keyboard isn't working properly.

twinkle

Needs dvd check for bmiidx, bmiidxa, bmiidxc & bmiidxca, dummy 8mb bank removal and dvd player and video mixing emulation. Some of the games are also incomplete dumps.

vamphalf

yorizori - Missing GFX ROMs dump.

vcombat

Partially working driver. Most of the memory maps for all four CPUs are complete.

vectrex

raaspec - Timings and mandatory artwork missing.

vega

Controls aren't correctly hooked up and objects aren't properly positioned.

vegas

warfa - Something is wrong with the on-board ethernet chip emulation. If the chip is hacked out, the game boots, but that's not accurate. There were many rendering issues last time I checked.

roadburn - Sound board is different; with some manual fiddling, you can get it in-game, but it doesn't work particularly well.

nbagold, nbanfl, nbashowt - These Vegas games used a Voodoo Banshee video card. The current 3dfx voodoo emulation has some basic support for the Banshee, but it is pretty minimal. The tricky bit is that the Banshee (and later, the Voodoo 3) have integrated 2D and 3D capabilities, so we need to emulate at least part of a VGA controller in addition to the 3D. These boards also had some new features that require some addition internal reworking of the Voodoo driver.

cartfury, sf2049, sf2049se, sf2049te - Voodoo 3-based, one step beyond the Voodoo Banshee problems. sf2049se bios is a bad dump.

vicdual

brdrlinet - One of the program ROMs need a redump.

headonsa, headon2s - Won't coin up.

videopkr

bpoker -

viper

Preliminary driver, PPC+voodoo.

voyager

PC hardware. Preliminary driver.

vp101

MIPS + custom 3D hardware. Boots but lacks 3d GFX hardware emulation.

vpoker

Needs 6840PTM hook-up, I/Os and sound emulation.

vsnes

suprmriobl, suprmriobl2 - Bootleg with extra Z80.

wallc

sidampkr - Encrypted.

wgp

Recently demoted to not working status.

whitestar

Skeleton driver. Pinball games.

wico

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

wildpkr

Preliminary driver. Needs memory map improvements, ACRTC support, GFX decode and sound support.

williams

defndjeu, tornado2 - Bad dumps.

zac_1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

zac_proto

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

zn

bam2 - Lacks music (which streams from a hard disk under the control of an H8/3644 MCU).

beastrzb - Incomplete dump.

primrag2 - Watchdog reset at startup.

psyforcex - Exception in attract after reading 0xbbbbbbbb from 0x8025ed18 leads to watchdog reset.

strider and clones - Random hangs / crashes.

zodiack

bounty2 - Different memory map. Probably something in the epoxy module marked "CPU PACKII".