MAME Interrupt Function Review: Difference between revisions
(New page: The following refers to the MAME core IRQ handling functions (eg. cpunum_set_input_line). ASSERT_LINE - raise the interrupt line and hold it there indefinitely CLEAR_LINE - lower the int...) |
No edit summary |
||
| Line 1: | Line 1: | ||
The following refers to the MAME core IRQ handling functions (eg. cpunum_set_input_line). | The following refers to the MAME core IRQ handling functions (eg. cpunum_set_input_line). | ||
ASSERT_LINE - raise the interrupt line and hold it there indefinitely | ASSERT_LINE - raise the interrupt line and hold it there indefinitely | ||
| Line 8: | Line 9: | ||
HOLD_LINE - raise the interrupt line and hold it there until the interrupt is acknowledged by the CPU (note that this really only applies to those few CPUs with a full acknowledge cycles; the Z80 is the primary one -- all other uses are cheating) | HOLD_LINE - raise the interrupt line and hold it there until the interrupt is acknowledged by the CPU (note that this really only applies to those few CPUs with a full acknowledge cycles; the Z80 is the primary one -- all other uses are cheating) | ||
On most CPUs, most interrupt lines are level-sensitive, which means that they will continue to generate interrupts as long as they are asserted. This generally means that you can't use PULSE_LINE because pulsing an interrupt line is instantaneous. In real life, the CPU would never respond to such a pulse because it is too short. | On most CPUs, most interrupt lines are level-sensitive, which means that they will continue to generate interrupts as long as they are asserted. This generally means that you can't use PULSE_LINE because pulsing an interrupt line is instantaneous. In real life, the CPU would never respond to such a pulse because it is too short. | ||
Revision as of 05:40, 4 February 2007
The following refers to the MAME core IRQ handling functions (eg. cpunum_set_input_line).
ASSERT_LINE - raise the interrupt line and hold it there indefinitely
CLEAR_LINE - lower the interrupt line and hold it there indefinitely
PULSE_LINE - instantaneously do an ASSERT_LINE followed by a CLEAR_LINE
HOLD_LINE - raise the interrupt line and hold it there until the interrupt is acknowledged by the CPU (note that this really only applies to those few CPUs with a full acknowledge cycles; the Z80 is the primary one -- all other uses are cheating)
On most CPUs, most interrupt lines are level-sensitive, which means that they will continue to generate interrupts as long as they are asserted. This generally means that you can't use PULSE_LINE because pulsing an interrupt line is instantaneous. In real life, the CPU would never respond to such a pulse because it is too short.
Some CPUs have interrupt lines that are edge-sensitive, which means they will detect a state change from CLEAR_LINE to ASSERT_LINE and latch that information internally. Then they will take the interrupt and clear the latch. These are the only types of interrupts that can be used with PULSE_LINE.
Some CPUs let you program the interrupt lines to be either edge or level sensitive.
There may be helper functions in the future that allow the driver author to assert a line for a set period of time.
