MNW

This page is designed to allow for a quick look over all the drivers with a MACHINE_NOT_WORKING flag by giving, as much as possible, an idea on the amount of effort needed to fix them.

access/acvirus

80C5xx + dsp56k based. Skeletonish.

acorn/aa310

RISC OS Draw app uses unimplemented copro instructions; needs ABORT line support to the ARM core; missing hard disc controller, serial interface, 82c711, podules expansions.

acorn/accomm

Skeletonish.

acorn/aristmk5

Hardware differences from the base Acorn Archimedes are not fully understood yet.

Shares timing issues like base AA.

acorn/bbc

torch301, torch725, abc110, acw443, abc310, reutapm, bbcmaiv, bbcmarm, discmate, discmon, cfa3000, cfa3000bp, econx25, autoc15, daisy, mpc800, mpc900, mpc900gx, sist1 - All have different hardware combinations which aren't implemented yet.

acorn/electron

btm2105 -

acorn/riscpc

PS/2 keyboard doesn't work properly, CMOS settings don't work, pending fatalerror from ARM7 core.

acorn/ssfindo

tetfight - PS7500 is preliminary. EEPROM write hook up isn't correct, causing incorrect configuration after saving.

act/apricotf

Needs CTC/SIO interrupt acknowledge, CTC clocks and sound emulation.

act/apricotp

Needs devices, LCD and sound hook-ups.

act/apxen

Needs boot ROM disable, wrap around mode, floppy, DMA, harddisk, keyboard, RS232, printer, colour graphics board.

adc/super6

Floppy emulation needs fixing, peripherals aren't emulated.

adp/adp

fstation - Suntris crashes due to HD63484 emulation problems.

funlddlx - Keeps looping between F_IN and FOUL messages.

adp/manohman

Preliminary driver.

agat/agat

Similar to Apple II (same bus architecture, keyboard and floppy interface), but video controller is completely different.

agat9 - Needs memory banking. Extensive todo at the top of the driver.

akai/akaiax80

Skeletonish. UPD7811 based.

akai/mpc3000

Preliminary driver. NEV V53 CPU and L7A1045-L6048 sound DSP emulation is preliminary.

alesis/alesis

The driver seems quite flashed out, but has no notes on what's missing.

alpha/champbas

tbasebal - M68705 MCU isn't emulated yet.

altos/altos2

Keyboard not dumped and emulated.

altos/altos486

Still very incomplete.

altos/altos5

When running MP/M, dir command crashes the system.

altos/altos586

Only the diags floppy boots. Preliminary driver.

amiga/alg

Laserdisc games on Amiga 500 hardware. They all work in theory, but are waiting for a good quality laserdisc dump.

amiga/amiga

Amiga chips emulation lacks a lot of features.

amiga/arsystems

ar_dart2 - Bad dump.

amiga/cubo

eldoraldg - Touchscreen is offset and cannot be calibrated, joystick buttons aren't recognized properly, has slight GFX bug with roulette ball.

lsrquiz - No player 2 inputs (ingame), wrong pitch for most gfxs, access violation during gameplay or on emu exit (microtouch?).

lsrquiz2i - Wrong pitch for some gfxs, access violation during gameplay (microtouch?).

lsrquizg - Doesn't accept coins, no player 2 inputs (ingame), wrong pitch for most gfxs, access violation during gameplay or on emu exit (microtouch?).

odeontw - 'Invalid NVRAM', accesses area $6xxxxx and claims invalid RAM config if bypassed.

odeontw2 - Resets halfway thru "please wait" in service mode, therefore NVRAM cannot be inited.

amiga/mquake

A complete mystery. The existing dumps are 100% confirmed. Test mode works. All remaining code is heavily encrypted. Even the original author of the game doesn't recall any encryption, but it is definitely there. It is not done in software; all unencrypted code has been accounted for.

amirix/wxstar4k

M68010 based. Cable head-end unit. Very preliminary.

ampro/lbpc

PC. V40 based. Inputs aren't hooked up.

amstrad/amstr_pc

The driver seems quite flashed out, but has no notes on what's missing.

amstrad/pda600

Serial port doesn't work.

apollo/apollo

dn5500, dsp5500, dn5500_19i - Newer models aren't fully emulated yet.

apple/apple2

space84 - Clone on different hardware.

apple/apple2e

mprof3, prav8c - Clones on different hardware.

apple/apple2gs

apple2gsmt - Prototype with some different hardware. Differences not emulated yet.

apple2gsr3p - A ROM isn't dumped.

apple/imacg3

Very preliminary driver.

apple/lisa

Lisa OS doesn't boot.

apple/macpwrbk030

macpd210 - Different hardware, should probably be moved to own driver.

apple/pippin

Very preliminary driver.

apple/powermacg3

Very preliminary driver.

apple/tk2000

Apple II clones, not fully compatible. Differences aren't correctly emulated yet.

arcadia/arcadia

mratlus, plldium, polyvcg, trakcvg -

aristocrat/aristmk4

86lions - Runs on earlier, slightly different hardware.

clkwise - Needs redump of the program ROMs.

aristocrat/aristmk6

Skeleton driver. System is SH4 based.

astrocorp/astrcorp

cptshark - Needs verifying inputs and outputs.

gostopac - Stuck during boot with 'S4' message. Also needs correct 'CPU code'.

hapfarm - Problems with interrupts?

magibomba, westvent - Bad dump of a program ROM.

magibombb, magibombc, magibombf, magibombh, magibombi - Freeze due to unemulated protection.

magibombd, winbingoa Need correct sprite ROM dump.

magibombg - Needs correct "CPU code", EEPROM and sprite ROM dump.

monkeyl and clones - Need correct "CPU code", outputs and inputs need to be checked.

speedmst and clones - Need correct "CPU code" and EEPROM dump.

wwitch - Need correct "CPU code", correct GFX ROM loading, outputs and inputs.

astrocorp/astropc

Fruit machines. AMD Geode based. Skeletonish.

atari/a2600

a2600_pop - 2 joysticks and 2 paddles are hooked up to the unit; unknown how.

atari/atari400

a1200xl - Bad dump.

a65xea, a130xe -

atari/atarigx2

All of these games suffer from some advanced protection that affects them in different ways. Through some magic accesses in memory, data can be decrypted using some special key sequences that are not entirely understood. It's possible to find all possible data sources, run them through the decryption process on the real PCB, and then encode that information in the driver, and for some of the games it has been done. Only rrreveng and clones are missing.

rrreveng and clones - Unemulated protection. It's possible the same method used to break Moto Frenzy's protection could be used.

atari/atarist

Emulation still preliminary. TODO is on top of the source file.

atari/atarisy2

paperboyp - Prototype with possibly different hardware. Some program ROMs didn't read consistently and are suspected bad. GFX ROMs weren't dumped for this set.

atari/atarittl

tank - Netlist has been added but needs debugging and it runs very slow.

atari/atetris

atetrisb5 - Uses a large TTL board as substitute for Slapstic and Pokeys. Currently unemulated.

atari/badlandsbl

Inputs aren't correctly hooked up, missing sprite-tilemap priority, colors. Sound hw isn't correctly hooked up.

atari/bartop52

Coins and timer were handled by Bartop system bios. Since bios dump is not available, regular Atari 5200 bios is used and game is marked as not working. Game cart is also marked as bad dump as it is done in "console style", i.e. one file for all game data.

atari/bwidow

bwidowp - Prototype on different hardware.

atari/bzone

dsrtwars - Bootleg with different sound system. Mostly works but sound is very badly emulated.

atari/centiped

magworma - Service mode works, game does not.

atari/cmmb

Banking not understood.

atari/cops

cops and clone - No laserdisc dump.

atari/harddriv

steeltalp, hdrivairp - Prototypes, possibly running on slightly different hardware.

atari/hitparade

Juke box. TMS1300 based. The mechanical parts aren't emulated.

atari/jaguar

jaguar, jaguarcd - Currently the driver is geared toward supporting the cojag arcade games. Jaguar console support is very poor, most games aren't properly playable or have severe performance issues or crashes related to the unsafe blitter code.

atari/klax

klax5bl3 - Audio CPU has encrypted opcodes.

atari/mediagx

Mainly just need the inputs hooked up, which are mapped to the parallel port via a JAMMA interface.

atari/metalmx

Skeleton driver. Extremely complex prototype hardware.

atari/missile

mcombat, mcombata, mcombats - Bootlegs on different hardware.

missilem - This kit combines Missile Command and Super Missile Attack on ddaughterboard plugged into the main pcb cpu slot.

atari/quizshow

Missing tape dump and GFX ROMs need redump.

atari/tank8

tank8a, tank8b, tank8c, tank8d - Bad / incomplete dumps.

atlus/cave

cellage - Photo booth. Needs correct GFX emulation plus emulation of camera and printer.

att/unixpc

DIVS instruction at 0x801112 (the second time) causes a divide-by-zero exception the system isn't ready for due to word at 0x5EA6 being zero. Code might not get there if the attempted FDC boot succeeds; FDC hookup probably needs help. 2797 isn't asserting DRQ?

ausnz/amust

Lots of work still needed. Lacks software to further improve emulation.

ausnz/dmax8000

Needs parallel port, centronics port, AUX serial port and FDC/FDD/HD setup.

ausnz/labtam

Needs emulation of additional cards.

ausnz/mbee

mbee128, mbee128p, mbee256, mbee56, mbeepp, mbeett - Hardware differences haven't been emulated yet.

ausnz/poly

Preliminary driver. Extensive TO-DO at the top of the driver.

ausnz/proteus

Doesn't seem to work with the generic terminal. It's supposed to be used with a Lear Siegler ADM-31 terminal.

ausnz/pulsar

Floppy doesn't work correctly.

banctec/banctec

Preliminary driver.

bandai/rx78

Inputs might be incorrectly hooked up.

barcrest/mpu1

Missing layouts.

barcrest/mpu3

Most games fail to boot, giving the CPU a 'WAIT' instruction then sitting there; some complain about Characterizer (protection) and then do the same; a few boot to show light displays with no LED text; some display misaligned LED text; many run VERY slowly, even when the CPU is inactive (inefficient MAME timer system overhead?).

barcrest/mpu4avan

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4bwb

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4concept

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4crystal

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4empire

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4mdm

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4misc

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4mod2sw

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4mod4oki

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4mod4yam

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4plasma

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4redpoint

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4union

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4unsorted

Fruit machine hardware. Not working yet. Needs artwork.

barcrest/mpu4vid

Needs correct implementation of characteriser protection for each game. BwB games need more work: They have a slightly different 68k memory map. The 6850 is at e00000 and the 6840 is at e01000; they appear to hang on the handshake with the MPU4 board. Currently using a scanline timer to drive an approximation of the SCN2674 scanline logic, but this is perhaps better served as a proper device. Deal 'Em lockouts vary on certain cabinets (normally connected to AUX2, but not there?). Deal 'Em has bad tiles (apostrophe, logo, bottom corner), black should actually be transparent to give black on green.

bfm/bfcobra

beeline, inquiztr - Missing floppy disk image.

bfm/bfmsys85

Fruit machine hardware. Skeleton driver.

bfm/bfm_blackbox

Mostly missing layouts to be considered playable.

bfm/bfm_sc1

Fruit machine hardware. Skeleton driver.

bfm/bfm_sc2

m_bcgslm, m_brkfst and clones, m_bfocus, m_cpeno1, m_luvjob - Mechanical games imported from AgeMame. The fruit machine games don't work either.

gldncrwnhop - Has different protection from the parent.

quintond - Missing emulation of RS232 data link device (see BACTA Datapak specs for more info).

bfm/bfm_sc4

Fruit machine hardware. Most games pass the startup tests.

bmc/koftball

Incomplete protection simulation.

bmc/popobear

magkengo - Slightly different PCB. Needs emulation of its peculiarities.

brother/ax145

Stops while checking the printer.

brother/lw700i

Keyboard matrix hasn't been completely figured out yet.

canon/canon_s80

Skeleton driver.

canon/cat

Big TODO at the top of the driver.

capcom/alien

Preliminary driver (SH4 based system). Has 2 MPEG2 decoder chips.

capcom/cps1

cps1mult - Needs emulation of the game selection via DIP switches.

pmonster - Needs hopper emulation.

sf2amf, sf2stt - Missing program ROMs dump.

varthb3 - Different video registers need emulating.

capcom/mitchell

pangbp - Has an extra Z80 with battery backed RAM for protection. RAM dump not available.

pkladiesbl, pkladiesblu ' - Needs CPU "decryption".

pkladiesbl2 ' - Needs inputs, sound and GFX fixes.

spangbl2 - Bootleg on different hardware.

casio/cfx9850

Preliminary driver.

casio/ctk2000

Keyboard. Emulation is preliminary. ARM derivative.

casio/fp1100

IRQs aren't emulated, cassette, FDC and keyboard don't work.

casio/fp200

Needs cassette i/f, serial i/f, FDC (requires test program that Service manual mentions), ROM/RAM slot interface, mini plotter printer (FP-1011PL) and graphic printer (FP-1012PR).

casio/fp6000

FDC/HDD and cassette saving don't work.

casio/ld50

Electronic drums. I87C52. Dream SAM9793 and Burr-Brown PCM1717E DAC aren't emulated.

casio/pickytlk

Missing inputs, and I/O callbacks copied from CFX9850G need to be reviewed.

casio/pv2000

Keyboard is only partially supported, joystick and cassette aren't emulated.

casio/sk1

CPU is an unemulated MSM6283, possibly with undumped internal ROM.

cave/cv1k

mmmbanc - Needs touch screen emulation handled via SH4 serial.

ccs/ccs2810

Floppy implementation needs work.

ceres/ceres

Needs startup/reset memory map, i/o device mapping, interrupt acknowledge, WD1002-05 Winchester/Floppy Disk Controller (WFC), keyboard, mouse.

ces/cesclass

Needs custom layout for dual LCDs, artwork and lamps position needed to make progresses, U43 and U44 bad in Trap Shoot Classic, games are incredibly sluggish, irq sources are unknown, Trap Shoot Classic runs on a single LCD, needs mod.

chromatics/cgc7900

Skeleton driver.

cinematronics/dlair

dlairc, dlairb, dlaira, dlair_2, dlair_1, dleuro, dleuroalt, dlital - Only LD-V1000 versions are supported, due to no viable solution for reading configuration DIPs at init time.

spaceace and clones - No laserdisc dump yet.

cinematronics/leland

aafbb - One of the program ROMs is a bad dump.

citoh/cit220

Preliminary driver. I8085A based.

coleco/wrinkles

Sensors aren't emulated yet.

commodore/c64

clipper - Hardware differences haven't been emulated yet.

commodore/c65

Preliminary driver. Extensive TODO at the top of the driver.

commodore/cbm2

bx256hp, cbm730 - The i8088 board isn't emulated yet.

cbm720_de - Missing chargen dump.

commodore/mps1230

Printer. Basically a skeleton driver.

compugraphic/pwrview

Preliminary driver. I80186 based.

cromemco/c10

Driver currently gets to a loop where it waits for an interrupt.

dataeast/btime

tisland - The decryption seems good but needs a ROM patch for some opcodes. The ROM is confirmed good, so maybe some special feature of the DECO-7 CPU?

dataeast/cntsteer

cntsteer - Needs better understanding of the communications and correct ROZ layer implementation.

gekitsui, zerotrgt and clone - Need better ROZ layer implementation.

dataeast/dec0

automat - Bootleg on different hardware. Minor video glitches.

bandit - Incomplete decbac chip emulation causes bad GFXs.

mastbond, secretab - Bootleg on different hardware. Unemulated layer scrolling and banking.

ffantasybl - Hangs after killing Lamia. Might have to do with the M68705 MCU, which isn't dumped.

dataeast/deco32

gunhard, lockload, lockloadu - lightgun hookup not completely understood, randomly locks up

dataeast/deco_ld

The driver needs better video e I/O emulation, laserdisc hook-ups.

dataeast/deco_mlc

skullfng and clones - Random hangs sometimes.

stadhr96j2 - Stops with a mismatch between mother board and cart country code.

dataeast/deshoros

Needs graphics emulation through artwork system and printer emulation.

dataeast/karnov

karnovjbl - Bootleg. Uses a different MCU (NEC D8748HD) which needs simulation or, if possible, dumping.

dataeast/pcktgal

pcktgalba - This bootleg connects two PCBs with completely different hardware. The Pocket Gal PCB is emulated here, while the other isn't currently connected and the switching between the two games isn't emulated.

dataeast/progolf

progolfa - Ball is misplaced when on the ground.

dataeast/tumbleb

funkyjetb, tumblebpa - Bootlegs on different hardware

ddr/ac1

ac1scch - Hardware differences aren't emulated yet.

ddr/bcs3

bcs3a, bcs3b, bcs3c, bcs3d -

ddr/chessmst

chessmsta - Figure out why it won't work, for starters it assumes z80 carry flag is set at poweron?

ddr/mc8030

Very little documentation available, so the driver is mostly guesswork. Z80 based.

ddr/pcm

Lack of software makes it difficult to prove the emulation is correct.

dec/dct11em

Skeleton driver.

dec/dectalk

Extensive TODO at the top of the driver.

dec/kn01

Needs SCSI and mouse emulation.

dec/kn02

MIPS family based. Preliminary driver.

dec/vt62

VT61 based. Very preliminary. Missing some dumps.

dms/dms5000

Skeleton driver.

dms/dms86

Preliminary driver.

dynax/ddenlovr

daireach - Inputs / DIPs need verifying.

hgokou and clone - They don't respond to inputs properly, and go into "uncooperative mode" after you win a game, refusing to accept the inputs for the double-up game. Possibly due to protection.

momotaro - Protection + some ROMs are badly dumped.

dynax/dynax

tenkai2b - Missing dump of the internal ROM of the TMP91640.

dynax/royalmah

cafebrk, cafepara - Internal ROM has been dumped but data ROM seems scrambled.

cafedoll, cafedollg, ougonhai - Protection checks not completely circumvented.

chalgirl, mjsenka, mjsiyoub, rkjanoh2 - Banking needs to be verified by finishing the game.

dragonmj, ichiban, pongboo2 - Banking not understood yet.

janoh - Incomplete dump.

janoha -

jansou - Missing internal program ROM.

mjdejavu and clone - Calls by the player don't work.

mjtensin - Random crashes, related to interrupts.

ougonhaib3 - One GFX ROM is a bad dump.

efo/cedar_magnet

mag_drac - Bad dump.

elektor/ec65

Preliminary driver.

elektron/elektronmono

MCF5206E based. Skeletonish.

ensoniq/enmirage

Needs Four Pole Low-Pass Voltage Controlled Filter section, external sync signal, foot pedal, ADC feedback, piano keyboard controller, expansion connector, stereo output.

ensoniq/esqasr

Skeleton driver.

ensoniq/esqkt

ts10, ts12 -

ensoniq/esqmr

Skeleton driver.

eolith/eolith

raccoon - Game animation & timers seem too fast.

epson/hx20

Needs emulation of: keyboard interrupt, LCD controller, serial, SW6 read, RS-232, microcassette, printer, ROM cartridge, floppy TF-20, barcode reader. Might need a M6800 core rewrite.

esprit/esp250c

Preliminary driver.

esprit/executive10

Video emulation is missing features, no NOVRAM store / recall.

exidy/exidy440

showdown4 - Different type of protection wrt to the parent.

f32/f-32

royalpk2 - It will soft-lock when attempting to use either settings-save options in the service menu.

facit/f4431

Missing emulation of character attributes (RAM at 0xc000), cursor, 132 column mode, smooth scrolling, timings, printer.

facit/facit4440

Keyboard isn't emulated.

fairchild/f387x

Computer. F8 based. Driver is skeleton-ish.

fairlight/cmi

MASTER 'TIM' test fails. LGTST 'TIM' test is out of tolerance without 6840 hack.

falco/falco500

falco5220e - Bad dump. ASIC emulation is incomplete.

force/miniforce

Very preliminary driver.

fujitsu/fm7

fm11, fm16beta, fm7740sx - Extra features not implemented.

fujitsu/fmtowns

Video emulation is far from complete.

funworld/4roses

Skeleton driver. The games' program ROM has been decrypted, but they have an undumped MCU which needs decapping or simulation.

funworld/funworld

fw_a7_11, fw_a7_11a, fw_a0_1, jokcrdep - Different hardware with epoxy block, to be reverse engineered.

jolyjokrc - Bad program ROM.

multiwinb - Encryption not figured out yet.

royalcrd_msx , royalcrd_nes and clone - Stealth games which combine the poker game hardware and the console hardware.

funworld/photoply

FDC error, needs a DASM investigation / work-around.

funworld/supercrd

Partially decrypted but need more work to be playable.

gaelco/atvtrack

Preliminary driver.

gaelco/bigkarnk_ms

Heavily modified bootleg of Big Karnak running on the Modular System. Only preliminary work has been done.

gaelco/gaelco2

play2000_50i - Bad dump.

aligatorp, chmppool, jungleani, srollnd - Missing ds5002fp dump.

gaelco/goldart

DS5002FP based. Preliminary driver, GFX, sound and inputs aren't properly emulated yet.

gaelco/mastboy

mastboyiv2 - Needs a different MCU program.

gaelco/rollext

GFX glitches, possible DSP core bugs.

gaelco/splash

funystrp, puckpepl - Protection, controls eating of dots + other things.

rebus - Another protected Microhard game.

ringball - Currently stuck at initialization / test mode, probably protected.

galaxian/fastfred

boggy84b2 - Missing the dump of a program ROM.

galaxian/galaxian

amidarc, aracnisa - Resets when starting a game.

ckongcv, ckongis - Bootleg on different hardware.

dingoe - Probable bad dump and encryption.

highroll - Auto starts game after inserting coin, bad cards GFX, bad inputs response, not all inputs are mapped.

jungsub - Different hardware, needs better GFX handling and one GFX ROM is bad.

ncentury, scramblebun, scrammr - Stuck at boot. IRQ isn't enabled correctly. Protected?

mooncrs5, mutacion, supergx - Bad dumps.

olibug - One of the GFX ROMs is bad. Uses the Galaxian PROM, which gives bad colors(?).

tenspot - Menu isn't working yet.

warofbugg - Bootleg on slightly different hardware.

galaxian/galaxold

drivfrcsga, spcwarp - Bad dump.

trvchlng - Questions ROMs aren't dumped.

galaxian/scobra

rescuefe - Bad / incomplete dump.

gamepark/gp2x

Skeleton driver.

gamepark/gp32

Driver is quite advanced, but isn't fully working yet.

gametron/sbugger

sbugger - Bad dump, different revision to working set.

handheld/hh_cop400

vidchal - Needs videotape support.

handheld/hh_hcms40

bombman, gdefender, ggdman, ktparman, puckimon, tkjmaru, wantgman - Missing artwork.

handheld/hh_pic16

pabball, uspbball - Preliminary drivers.

handheld/hh_smc1k

Missing SVGs.

handheld/hh_sm510

nsmb3, nsmw - Missing LCD scan.

handheld/hh_tms1k

bship and clone, elecbowl - As far as MAME is concerned, the game is emulated fine. But for it to be playable, it requires interaction with other, unemulatable, things (eg. game board/pieces, playing cards, pen & paper, etc).

tithermos - Temperature sensor comparator isn't emulated yet (right now just the digital clock works).

handheld/tispeak

k28m2 - LCD isn't emulated.

lantransp, tnttellp - Version from the patent. Maybe incompatible with released modules?

hds/hds200

Needs fixing the SCN2674/Z80DMA hookup, missing keyboard keys and RS232 control lines.

heathkit/h19

gp19 - GP-19 graphics mode only shows the top half of the image (on the visible screen).

heathzenith/z100

Undumped MCU, plus needs removing of the parity check IRQ patch, implementation of the S-100 bus features, irqs need 8259 "auto-ack"-ing in order to work properly and vertical scrolling isn't understood.

heathzenith/z22

Missing keyboard emulation.

hitachi/b16

No documentation available, almost no software available. Long TODO on top of file.

hitachi/bml3

Long TODO at the top of the file.

hitachi/mbs1

Cassette won't load; many missing features.

homebrew/d6809

Most devices aren't hooked up. Skeletonish.

homebrew/minib

Keyboard isn't working correctly.

homebrew/p112

Skeleton-ish driver. Z8018216 based.

homebrew/pc532

Needs ET532 emulation.

homebrew/ravens

The cassette saves a noise but it returns a bad load.

homebrew/sbc6510

ATMEGA8 CPU emulation is incomplete.

homebrew/uzebox

SD card not supported yet.

homelab/homelab

brailab4, homelab3, homelab4 - Preliminary driver. Cassette support needs to be fixed, among other things.

hp/hp_ipc

hp9808a - Preliminary driver.

hp/hp16500

Preliminary driver.

hp/hp2620

Keyboard isn't emulated.

hp/hp3478a

Runs, AD LINK ERROR on stock ROM due to unimplemented AD link.

hp/hp48

hp39g -

hp/hp49gp

Preliminary driver.

hp/hp95lx

Native keyboard isn't emulated. Driver still preliminary.

hp/hp9k

Boot tests fail.

hp/hp9k_3xx

Preliminary driver.

hp/hpz80unk

Skeleton driver. Needs banking and peripherals support.

husky/hunter2

Preliminary driver. Without software to test it, it's difficult to progress with the emulation.

ibm/rs6000_type7xxx

Skeleton-ish. Server. PPC601 based.

ibm/rtpc

Diagnostic disk 1 fails with code 67; aix vrm disk 1 fails with alternating code a6/13.

ibm/thinkpad600

Needs keyboard and RTC emulation.

ice/chexx

Electro-mechanical bubble hockey games.

ice/ice_bozopail

Redemption game. Mechanical parts aren't emulated.

ice/lethalj

franticf and clone - Directional inputs (wheel) don't work yet.

ice/vp101

MIPS + custom 3D hardware. Boots but lacks 3d GFX hardware emulation.

igs/cabaret

cabaret - Not fully playable because of some pitfalls.

double8l, kungfua - Undumped internal ROM.

igs/goldstar

3cdpoker, 3cdpokera, animalw, cll, cmfb55, luckylad, pkrmast, prkmasta, rolling, srmagic, super972 - They need work on inputs / dips.

animalhs and clones, eldoraddoa - Need correct GFX banking, I/O.

ll3, wcherry - Only preliminary work has been done.

aplan, chryangla, cmast99, cmast99b - The game appears to be stuck in a loop resetting itself after initialising NVRAM.

bonusch - Undumped MCU.

cb3c - Needs correct memory map and one GFX ROM is a bad dump.

cb3f - Encryption not completely figured out.

cherry96 - Different hardware.

chryangl, chryanglb - Hangs when betting or after a couple of attract mode cycles. Protection related?

cmast92 and clone, eldoradd, eldoraddo, eldoraddob - Needs correct GFX emulation. Game is running otherwise.

cmast97 and clone - PROM decode needs fixing, needs correct GFX banking.

cmasterbv, cmv4a - Missing switch between normal and "stealth" game.

cmasteri - ROMs contain only half of what they should, but dump sizes are confirmed wrt to ROM chip type.

cmtetriskr - Needs correct GFX decode.

cmtetrsb - Soon after boot it shows garbage due to wrong graphics banks.

cmv4zg, cmv4zga - Seem to reset after reels stop spinning. Slightly protected?

crazybonb, wcat3a - Decryption should be good. Possibly needs a different machine driver?

hamhouse - Needs correct I/O.

jkrmast, jkrmasta - Preliminary emulation.

luckybar - mc68705 MCU.

magoddsc, magoddsd - Custom encrypted CPU block.

nd8lines - Needs correct PROMs decoding and inputs.

noved - Needs GFX2 region decryption / decode, controls.

feverch, mbs2euro, megaline - Need more work in memory map, inputs, and reels alignment.

nfm and clone - Need decoding of the girls' GFX ROM.

roypok96c - Stuck at the Program Check screen.

super7 - Needs GFX and palette work. First time it boots and works, with written NVRAM it stops waiting for initialization. Slightly wrong decryption?

super9 - GFXs aren't decoded yet.

tcl - Encrypted.

war3cb - Address scrambling needs to be checked.

wcat3 - Encryption not completely broken, can be seen running after a couple soft resets.

igs/igs_fear

icescape - Touchscreen commands aren't emulated yet.

igs/igs_m027

amazonia and clone, amazoni2, klxyj, gonefsh2, luckycrs, olympic5 and clone, sdwx - Need dump of the internal ROM.

chessc2 - Needs IGS025 emulation.

extradrw - Inputs not implemented yet.

igs/igs_m027xa

crzybugsj, haunthig and clone, wldfruit - Missing internal ROM dump.

tripfevb - Hangs at payout.

igs/igs011

tygn - Needs correct protection workarounds. Currently fades to black during play.

igs/igs017

jking302us - IGS026 and IGS029 protection needs simulation.

mgcs ande clone - IGS029 protection needs more work.

sdmg2p - Protection sometimes kicks in after starting game, hopper isn't hooked up correctly.

slqz2a - Undumped program ROM.

tarzan - Missing sprites and sound ROM, imperfect tiles decryption.

tarzana - Missing IGS029 protection, missing sprites and sound ROM.

igs/igspoker

cpoker210ks, cpoker300us - Protection handling and inputs / outputs need to be verified.

stellecu - Bad / incomplete dump.

igs/jackie

kungfu - Needs correct inputs for the 'fighting' game.

igs/pgm

dmnfrntpcb, kovlsjb, kovlsjba, kovlsqh, kovlsqh2, kovshp, kovshxas, kovytzy, oldsplus, pgm3in1, puzlstar, svgtw - Need internal ROM of IGS027A.

drgw2100hk - Protections isn't simulated yet.

igs/spoker

3super8 - Roms are badly dumped.

jinhulu2 - Seems to try linking to something. Also needs IGS003 protection emulated.

igt/drw80pkr

Driver shows something, but emulation is still incomplete. I8039 based CPU with CRTC6845 video and AY8910 sound.

igt/gkigt

Preliminary driver. Needs hookup of the QUART devices, and fix "QUART COUNTER NOT RUNNING" error message; interrupt system hookup; understanding of what's "netflex" device. Furthermore, the CMOS doesn't seem to get properly initialized. Also, the ms72c set seems to have extra checks.

igt/peplus

all imperial games - Stuck during initialization.

all pc* sets - This sets use tokens instead of coin. They get stuck with "Token in timeout" message.

peke0004 and clones, peke0017 and clones, pex0006k, pex0013k, px0013ka -

peke0026, pemg0025, pemg0026, pemg0182, pemg0183, pemg0213, pemg0225, pemg0252, peps0205 - Need printer support.

all pepk* sets but pepk1024 -

pepp0021, pepp0079, pepp0596, pepp0598 - Need link support.

pex0489p, pex2474p - Need unknown PE+ GAME POKER program to run.

sv1pf434 - Occasionally makes an alarm sound most likely related to the door.

igt/splus

Driver imported from Agemame. Needs modernisation.

igt/videopkr

bpoker -

informer/informer_207_376

Two ROMs need a redump.

informer/informer_213

Terminal. 6809 based. The ASIC needs to be figured out.

intel/ipc

ipc - Dump incomplete.

intel/ipds

Skeleton driver. I8085A based.

intel/isbc

rpc86, isbc86, isbc8605, isbc8630, isbc286, sm1810 - Preliminary driver 8086 / 286 based.

intel/isbc660

Needs more Multibus cards emulated and installed.

intergraph/interpro

Preliminary driver.

irem/m10

ipminvad1 - Incomplete dumps.

irem/m107

kftgoal, wpksoc - Missing EEPROM hook-up.

irem/m62_bkungfu

Blitter data is encrypted and MCU is undumped.

irem/m72

hharryb2, loht_ms, lohtb, rtypem82b, rtype2m82b - The bootleg hardware is different to the original hardware.

irem/m92

nbbatman2bl - Bootleg with different sprite system, MCU as soundcpu, OKI samples for music/sound.

irem/redalert

demoneye - Missing 3rd graphic layer making level 2 impossible. Unclear what the layer should show.

isc/compucolor

ROMs are badly dumped. Needs floppy hook-up.

itech/itech8

stratabs - Controls aren't hooked up.

jaleco/acommand

acommand - Inputs aren't fully understood. Requires a major rework of the artwork sub-system. Needs to be merged with cischeat.cpp driver.

jaleco/armchamp

Mechanical arm simulation isn't perfect.

jaleco/blueprnt

unkzilec - Only the GFX ROMs are dumped.

jaleco/cischeat

armchmp2 and clones - Arm motor emulation is incorrect.

wildplt - Busted timings.

jaleco/ms32

f1superb - The road is always rendered as straight. The game has a road layer and extra ROMs for it. There is an unknown maths DSP for protection.

jaleco/tetrisp2

nndmseal and clones - Missing camera and printer emulation.

stepstag, step3, vjdash - Missing HD / bios dumps for the PC part.

jpm/guab

crisscrs - Missing disk image dump.

jpm/jpmimpct

buzzundr, monspdr, snlad - Incomplete dumps.

jpm/jpmimpctsw

all sets but j6aceclb, j6big50, j6bigbuk, j6bnza, j6camelt, j6cascz, j6gogold, j6guab, j6hapyhr, j6kungfu, j6mono60, j6montlk, j6roller, j6sonic, j6untch and relative clones - Need correct layouts and settings.

jpm/jpmsru

Missing layouts.

jpm/jpmsys5

cashcade - Incomplete dump? Shows a loading error.

monopldx1 - Missing questions?

jpm/jpmsys5sw

The mechanical games aren't emulated yet.

kaneko/galpani2

Kaneko protection MCU with internal rom, managing CPU comms. Decap should possible, should be the same for all games / sets.

kaneko/galpanic_ms

Heavily modified bootleg of Gals Panic running on the Modular System. Only preliminary work has been done.

kaneko/kaneko16

bonkadva - Shows an upside down KO! sprite, probably due to a failed start up check.

kaneko/snowbros

sutjarod - Needs correct protection data.

kaypro/kaypro

Most machines are incompletely emulated. The problems listed in the driver are:

kaypro1084 - Boots from floppy, but needs hard drive added.

kaypro4a - Floppy not working.

kayproiip88, kaypro484p88 - Works as a normal Kaypro 4, extra hardware not done.

omni2, omni4 - I/O board isn't emulated.

robie - Has twin 2.6MB 5.25 floppy drives which aren't supported, no software available.

konami/cobra

Complicated Konami 3D hardware. Bujutsu works a bit better.

konami/combatsc

bootcamp, bootcampa, combatscj, combatsct - Trackball isn't correctly emulated.

konami/dbz

dbz2bl - Bootleg on different hardware. Heavy priority / GFX issues, no sound.

konami/gberet

gberetb - Needs correct PROM decoding. As is, GFX are too mangled to play it.

konami/giclassic

Preliminary driver.

konami/goldenregion

Sprite banking isn't understood. Mechanical part isn't simulated.

konami/gticlub

thunderh and clone - They use an additional top board for sound, network and analog control functions.

konami/hornet

sscope and clones, sscope2 and clones -

terabrst and clones - Missing gun emulation.

terabrstaa, terabrstja, terabrstua - Missing gun emulation, won't boot due to issues with the cgboard/konppc.

thrilldbu - Heavy GFX glitches, fails wheel motor test.

konami/ironhors

farwest - Bootleg running on different hardware.

konami/konamigv

btchamp, kdeadeye, tmosh and clones - All games on this system suffer from a corner case involving audio track playback in the SCSI CD-ROM emulation.

konami/konamigx

opengolf and clones, racinfrc and clones - These games use a special ROZ layer generated by the "PSAC4" custom IC which appears to include a height map.

konami/konamim2

btltryst - Unemulated GFX modes make the game too glitchy to be playable.

totlvica, totlvicj, totlvicu - They get stuck during boot.

heatof11 - Hangs if Japan is selected. Timing related, as setting perfect interleave fixes it.

konami/konblands

Missing laserdisc dump.

konami/konendev

Most dumps are incomplete. Those fully dumped boot but fails various mechanical hardware tests.

konami/konmedal

slimekun -

tsururin - Resets after initial ROM / RAM test. IRQ related.

konami/konmedal020

Preliminary emulation.

konami/konmedal68k

crossmg2, fruitsmg - Mechanical parts aren't emulated yet.

dobouchn - Controls need verifying.

pwrchanc, spcpokan - Colors are wrong, inputs not verified.

unkkonmd - Stops with network ID error.

konami/konmedalppc

Preliminary driver. PPC based.

konami/ksys573

Game suffer from incomplete PSX-based hardware emulation and some are missing emulation of the external digital sound and I/O board.

konami/moo

moomesabl - Bootleg on different hardware. Sprite ROMs weren't dumped for this bootleg set.

konami/nwk-tr

Complex Konami 3D hardware.

konami/otomedius

Skeleton driver. PC hardware.

konami/overdriv

Driver has heavy graphic problems. Missing road (two unemulated K053250).

konami/stingnet

Preliminary driver. PPC based.

konami/tasman

Konami GX based PCB for gambling games.

konami/tmnt2

glfgreat and clones - DMA emulation is incomplete.

ssridersb - Bootleg on different hardware. Bad dump.

ssriders2 - Bootleg on different hardware.

konami/twinkle

bmiidx, bmiidxa, bmiidxc, bmiidxca - Connected over the mini-din8 (CN7) and DVD check requires RTS->CTS.

konami/viper

Preliminary driver, PPC+voodoo.

konami/xmen

xmenabl - Sprites are glitched, one Oki ROM is probably bad.

korg/korgm1

Preliminary driver.

kurzweil/krz2000

TMP68301 based. Skeletonish.

kyber/kminus

Computer. Z80 based. No notes on what's missing.

kyocera/kyocera

pc8201 - Cassette's not working, floppies aren't hooked up.

pc8201a - Cassette's not working.

npc8300 - Doesn't boot.

lsi/m3

Unfinished floppy hookup (no available software to test it). Not all keys are mapped.

luxor/abc1600

TODOs are short/long reset (RSTBUT), CIO, hard disk and connect RS-232 port A.

luxor/ds90

Skeleton driver. M68010 based.

matsushita/duet16

Floppy not hooked up correctly, still WIP.

matsushita/jr100

Paste drops many characters. Cassette not working correctly

matsushita/jr200

Wrong timings. Also needs a MN1544 4-bit CPU core and ROM dump.

matsushita/kn5000

Preliminary driver. TMP94C241F based.

mattel/intv

intvkbd - Has additional components / devices (i.e. tape) which aren't emulated.

maygay/maygay1bsw

Mechanical game imported from AGEMAME.

maygay/maygayv1

Skeleton driver for fruit machine games.

mc/mccpm

FDC is implemented but there's no software to test it.

mera/m79152pc

Skeleton driver. Z80 based.

merit/merit.cpp

tictacuk - Doesn't register coins.

merit/mtouchxl

mtchxl5k and clones, mtchxlgld and clone - The security key hasn't been reverse engineered.

mtchxlti -

merit/pubtimed

Skeletonish. M6802 based darts game.

metro/metro

metabee - Hopper isn't emulated, so game doesn't start.

poittoc - One of the program ROMs isn't dumped.

puzzlet - In game timer doesn't decrease.

mg1/mg1

Misses hard disc controller and mouse emulation.

microterm/microterm_f8

WIP driver. Missing some GFX modes.

midcoin/24cdjuke

Skeleton driver for a CD Juke Box.

midcoin/wink

wink, winka - Protection module has been reverse engineered but it's still missing something.

midw8080/8080bw

invasionrza - Bootlegs on slightly different hardware.

sisv1 - Some ROMs aren't dumped.

midway/astrocde

tenpindx - This game used a physical hockey puck which the player slid down the bowling alley. Sensors on the other end picked up the location and velocity of the puck and simulated the pin behavior. Requires simulation of this input interface in order to be considered working.

midway/atlantis

The Zeus2 video chip needs more work.

midway/balsente

triviaes4, triviaes5 - Though clearly derived by the originals in this driver, it uses different hardware, especially for the sound. Banking / ROM loading isn't figured out yet.

midway/mcr

nflfoot - CED-based disk game. Has gory Z80-based serial I/O interface that is not understood. The CED player interface is undocumented. A poor quality rip exists of the video (probably the best we will get). There is a second CED disk with different teams playing which we do not have access to.

midway/midyunit

mkrep -

midway/midzeus

crusnexo, thegrid and clones - These Zeus II-based games use a proprietary 3D graphics chip that has no available documentation.

midway/mw18w

Mechanical game. Needs artwork and lamps and sensors hook up.

midway/seattle

sfrushrkw, sfrushrkwo - Wavenet isn't emulated.

midway/spyhuntertec

spyhuntpr - Very different hardware.

midway/vegas

sf2049te and clone - Voodoo 3-based, one step beyond the Voodoo Banshee problems.

midway/williams

defndjeu, tornado2 - Bad dumps.

miltonbradley/vectrex

raaspec - Timings and mandatory artwork missing.

mips/mips

rc3230, rs3230 -

misc/39in1

19in1, 48in1 and clones, 60in1, fruitwld and clone, jumanji, plutus, pokrwild, rodent - Should be correctly decrypted but expect something different from the CPLD.

4in1a, 4in1b - These have been decrypted, currently boot but stuck at 'Hardware Check' with an error. Need adjusting of the cpld_*() methods.

misc/3do

Emulation is still preliminary. Needs DSPP core properly hooked up (should be similar if not same to the one used by the later Konami M2 HW).

misc/4enlinea

Needs proper UM487F device emulation. CPU logic seems quite off.

misc/4enraya

strker - Stops with 'RAM no good' message.

misc/acefruit

acefruit - Inputs aren't fully understood. Video in bonus game needs fixing.

starspnr - Most likely needs a redump of the program ROMs.

misc/amaticmg

Emulation of the type 2 and 3 boards is preliminary, thus only suprstar (board type 1) kinda works, though it errors out when inserting coins.

misc/amerihok

Preliminary driver. Mechanical / screenless system. Uses a Z8 based MCU.

misc/ampoker2

arizna10 - Undumped PIC provides protection. Currently can't exit operator mode to get in game.

ampkr2jsp, ampkr2jspa -

misc/amuzy

Skeleton-ish. H8/3007 CPU (internal ROM apparently not used), barely documented Yamaha YGV625 sprite processor and CRTC and OKI M9810 for sound.

misc/anes

Blitter is imperfectly emulated, but games can be played.

misc/arachnid

Mechanical game. Needs artwork with lamps support.

misc/artmagic

shtstar - Runs on different hardware. Also needs correct "CPU code".

misc/avt

Needs CTC and daisy-chain.

misc/bingor

Protection problems? Video hardware don't make much sense.

misc/blitz68k

Cadillac Jack sets - These games freeze while trying to print the redemption tickets. Also need the MCU dumped and emulated, since they currently relay on ROM patches to bypass the checks.

The other games - Undumped MCUs.

misc/buster

Skeleton driver.

misc/calomega

comg123, comg164, comg187, comg214, comg227, comg230 - Bad/incomplete dumps.

misc/carrera

alantin, bsebmanbl, bsebmanbl2, drkseal - Need correct inputs.

ncarrera - Needs MCU dump.

misc/cb2001

Incomplete decryption.

misc/changyu

Lots of not utilized ROMs.

changyu - MCU isn't hooked up yet.

misc/chsuper

losttrea - Inputs need verifying, probably playable apart from that.

misc/coinmstr

pokeroul, supnudg2 - Incomplete protection simulation.

trailblz - Question ROMs aren't dumped.

misc/coinmvga

Touch screen needs to be hooked up. GFX problems.

misc/crospuzl

Dies at POST with a SPU error.

misc/crystal

donghaer, maldaiza - Protection PIC hasn't been dumped yet.

officeye - Protection PICs have been dumped but there isn't a pic16c727 core yet. Simulation is quite good, but there is still some instability.

wulybuly -

misc/dgpix

btplay2k, letsdnce - Timing problems.

misc/drdmania

Darts machine with video. Z80 based. One ROM dump is bad.

misc/dwarfd

qc, quarterh and clones - Missing laserdisc dumps.

misc/ecoinf2

Skeleton driver for fruit machine games.

misc/ecoinf3

Skeleton driver for fruit machine games.

misc/ecoinfr

Skeleton driver for fruit machine games.

misc/epos

catapult, revenger - Bad dumps.

misc/esd16

fantstry and clone - Playable, but no sound because of an undumped PIC.

misc/esh

LD TROUBLE appears at POST. Sync/timing issue? Performance spike after some time of gameplay, CPU comms gets corrupt?

misc/eva

Preliminary driver. TMS 1000 / COP420 based.

misc/ez2d

Possibly bad BIOS dump.

misc/fastinvaders

Games reset. Schematics are available.

misc/freekick

countrun - Main program inside of custom CPU block.

countrunb2 - Possible bad dump, or encrypted.

misc/fresh

Preliminary driver. M68000 based.

misc/funkball

Preliminary driver. PC based hardware (Cyrix GX + 3DFX).

misc/gambl186

Missing At89c52 dump. EEPROM behaviour still buggy.

misc/gameace

hotbody2 - Program ROM isn't dumped.

misc/gammagic

Both games are missing M68K ROM dumps.

99bottles - Likely bad CD dump.

gammagic - Hangs after "ignoring write to swapbufferCMD when CMDFIFO is enabled" message.

misc/gamtor

Skeleton driver for fruit machine games.

misc/gi6809

Needs discovering the proper way to tie PIA's signals to Microprocessor's IRQs and coin in device support.

misc/gms

ballch, cots, sc2in1, sscs, super555 - Hang while booting, patched for now.

magslot, sc2in1 - Need correct GFX decode for 1st layer.

rbmk - 89C51 MCU isn't correctly hooked up yet.

rbspm - 89C51 MCU isn't correctly hooked up yet. PIC16F84 is dumped but MAME doesn't have a CPU core for it.

ssanguoj - Undumped 89C51 MCU.

misc/goldngam

Preliminary driver.

misc/goldnpkr

falcnwldc - Main CPU / MCU communications aren't correctly implemented yet.

goldnpkd - You always get a winning flush. Unemulated protection?

jkrbonus - Inputs need correction (in particular SW2 isn't hooked up). Also one GFX ROM is bad.

maxidpkr - Undumped 68705P5 MCU.

olym65bj, olym65wc - Encryption only partially beaten, also need a R6511 CPU core.

wldwitchb, wldwitche, wtchjackh -

pokerdub - Missing one program ROM.

potnpkrn - Hangs early on. Protection check?

witchcdk - A ROM is corrupt.

misc/gsspade

Mechanical redemption game? Only the sound board CPU ROM is dumped.

misc/hideseek

Missing the internal ROM dump of the HD64F7045F28 main CPU.

misc/highvdeo

bingopd, cuncino, grancapi, magicbom, newtiger, saladue and clone, zoomania and clone - Need correct / verified inputs.

unksmk - Doesn't respond to inputs. Protected.

misc/hitpoker

Protection: needs dumping or simulating PIC.

misc/hotstuff

Preliminary driver.

misc/intrscti

Undumped program ROM in an epoxy block.

misc/island

Unemulated features of the DS80C320 CPU and preliminary driver.

misc/istellar

Laserdisc game. Missing a disc dump.

misc/jackpool

Needs better understanding of the master/slave communications, better EEPROM and NVRAM hook-up.

misc/jackpot

Missing master unit comms (for game override?); loads of unused GFXs, irq and NMI in work RAM space; glitches in attract, service and D-Up screens (requires an NMI mask?); palette, RAMDAC?; complete I/O, identify chip type(s); EEPROM defaults (needs to be initialized in service mode for proper operation).

misc/jokrwild

Missing random number generator, inputs and sound.

misc/joystand

Sticker machine which needs camera, printer and light pen support to be useable.

misc/jungleyo

With a clean NVRAM MAME needs to be soft reset after init or the game will trip a '1111 exception' (caused by invalid opcode executed at 0x102, incomplete decryption most likely); likewise anything in the 0x100-0x1f7 range doesn't seem valid at all; the game sometimes expects 1+ coins even if player has available points (and freezing with "COIN" text blinking), very unlikely to be intended behaviour?

misc/kingpin

dealracl - Partially a bad dump and / or wrong ROM loading.

misc/laz_aftrshok

Mechanical game, needs controls simulation.

misc/laz_ribrak

awetoss - Mechanical game, needs controls simulation.

misc/magic10

hotslot, magic102 and clone, mcolors, mcolorsa, suprpool - Missing dump of the internal ROM of the HD6473308cp10.

misc/magicard

belslots, hotslots, magicle, quingo - Fail on I2C BUS ERROR - protection device missing.

bigdeal0 - Locks with 68070 continually executing address error exception.

dallaspk - Requires protection device (serial port ?).

magicard -

kajotcrd - Gets stuck during initialisation.

magicrd1a, magicrd1b, magicrd1d -

magicrde, magicrdea - Alarm when credit is added and credit is then cleared.

magicrdec - Fails on "OUT OF RANGE ERROR".

magicrdj, magicrdja - Fail on "ERROR IN SETTINGS".

simpbest - Undumped MCU controls winning percentage.

misc/magictg

Preliminary driver, almost works.

misc/malzak

malzak, malzak2 - Sprite collision detection doesn't fully work.

misc/matrix

Game ROMs are encrypted (preliminary decryption to be checked), may require a missing boot device;

misc/mcm70

At power on need to press START to use; missing cassette (x2) handling, MCP-132 printer/plotter device (Diablo HyType I) emulation, serial communications interface unit (terminal and modem ports).

misc/menghong

HY04 protection needs simulation (controls tile RNG at very least and possibly colors). EEPROM isn't hooked up yet.

misc/microbox2

Missing WD2123 device (dual channel 8251A) implementation.

misc/miniboy7

bejpoker, sminiboy - Missing inputs: HOLD 1 and SMALL.

misc/mirderby

Preliminary sprites and scrolling.

misc/multfish

crzmon2 and clones, rollfr_5 - Not decrypted yet.

misc/multfish_boot

igromult, igromula - GFX ROMs aren't dumped.

misc/neoprint

Needs implementation of the remaining video features and sound interface. Inputs are bare bones and need extra work. Needs simulation of the printer/camera devices, lamps. Upd4990a returns 4 years less than expected.

misc/nibble

Skeleton-ish. Unidentified CPU (possibly TMS9900).

misc/norautp

bjpoker, kimblz80, pma -

dphl, dphla, dphljp, drhl, drhla, gtipoker, kimbldhl, newhilop, smshilo, ssjkrpkr - Missing interrupts for I8080 CPU.

fastdrwp, dphlunka, dphlunkb - Hardware unknown.

noraut3a, noraut3b - Incomplete inputs / some strange behaviour.

norautu, unkljfpk - Encrypted.

norautua, norautub - Decryption incomplete. They run but have strange behaviour.

tpoker2 - Missing 68705 MCU dump / simulation.

misc/notechan

Very preliminary driver. Screenless system. Z80 + M6295 based.

misc/nsmpoker

Preliminary driver.

misc/oneshot

maddonnab - No program ROMs on this set. GFX have misplaced tiles when used with other program ROMs, so this is a different license / revision.

misc/pasha2

zdrum - Coins don't work, inputs incomplete, seems to trip some unimplemented / buggy behaviour of the Hyperstone core. Also needs hard disk dump and MP3 board emulation.

misc/piggypass

Redemption games. Mechanical.

misc/pntnpuzl

Skeleton-ish.

misc/poker72

Doesn't get in game, only test screens seem to work.

misc/quizpun2

quizpun, quizpun2 - Protection MCUs have been dumped and hooked up, but the driver still needs some work.

misc/rfslots8085

bformula2 - Bad dump.

misc/rfslotsmcs48

ajofrin, babyfrts25 - Bad dumps.

misc/rgum

Stuck at the play screen with 'attendere' (wait) message after coining up.

misc/sanremo

roadstar - Possibly different I/O map.

misc/sfbonus

amclink - "Game" function unknown.

version4 and clones - Incomplete dumps.

misc/skeetsht

Preliminary driver.

misc/skylncr

bdream97 - The inputs tend to act out of control at many times. This may have to do with the large number of unknown reads and writes to an I/O port at $66.

blshark - Protected or maybe incomplete decryption.

miaction, tigerslt - Preliminary emulation.

olymp, speedway - Decryption probably incomplete.

seadevil - Needs correct GFX ROM loading / decoding.

score5, spcliner - Palette doesn't work, so MAME only shows a black screen, even while you can hear the game running.

sonikfig - Once coined, there's no way to start a game.

speedwaya - Decryption should be good but it doesn't boot.

misc/smsmcorp

trvhanga - Missing questions ROMs.

misc/ssingles

atamanot - Needs a trojan, in order to understand how the protection really works.

misc/statriv2

cs1_ssp and later versions - Laserdisc games in need of laserdisc dump.

nsupertr3 - Some questions don't display correctly.

quaquiz2 - No inputs, needs nvram.

bbchall, statriv5se, supertr - Questions' ROMs aren't dumped.

misc/su2000

Preliminary driver.

misc/summit

Needs inputs, prom decode, sound, artwork (lamps), probably some irq masking and the like.

misc/tecnodar

Darts game. Mechanical part isn't simulated.

misc/tmspoker

Preliminary driver.

misc/triplex

Missing OMTI 5200 controller board emulation (floppy) and needs dump of the keyboard MCU and implementation of the full keyboard, with mouse.

misc/triton

Cassette interface isn't emulated.

misc/trucocl

You can't coin-up after first game over.

misc/unkpoker

I8085 based. Gets stuck if a coin isn't inserted at boot.

misc/vamphalf

misncrft and clone, worldadv - They start to stall for several seconds at a time after they've been running for a certain amount of time

mrkickera - If you allow EEPROM saving, then this set corrupts the EEPROM and then won't boot.

yorijori - Currently needs a ROM patch to work.

misc/vcombat

Partially working driver. Most of the memory maps for all four CPUs are complete.

misc/videosaa

jokrlady, paradar, scratch, toureiff, winner - Undumped main CPU ROM.

misc/vlc

Video section isn't emulated. Also needs security PAL U35 decoding, In/Out interface Board communication (included mechanical METER + some switch Door open, etc..), JCM Bill acceptor communication (probably ID-003 protocol), printer communication (Star Printer ).

misc/vocalizer

Extensive TODO at the top of the driver.

misc/voyager

PC hardware. Preliminary driver.

misc/vpoker

Needs 6840PTM hook-up, I/Os and sound emulation.

misc/wildpkr

Preliminary driver. Needs memory map improvements, ACRTC support, GFX decode and sound support.

misc/xtom3d

PC based (Celeron + 3DFX). Very preliminary.

mits/altair

Preliminary driver.

mits/mits680b

Skeleton-ish. M6800 based.

modelracing/subhuntr

s2650 based. Driver is skeleton-ish.

morrow/microdec

Floppy doesn't work and timer chip isn't hooked up.

morrow/tricep

Preliminary driver. MC68451 MMU isn't emulated.

motorola/m6805evs

Skeleton driver.

motorola/mvme162

M68040 based. Extensive TODO at the top of the driver.

msx/msx2

' fsa1fm - Modem not emulated, firmware partially working.

hbg900p and clones - RS232 not communicating.

hx23f and clones - Firmware goes into an infinite loop on the title screen.

hx33 - Half the pixels are missing in the firmware?

mbh70 - How to enter/use the firmware?

mpc27 - Light pen not emulated.

nms8260 -

victhc95 and clones - 2nd cpu/turbo not emulated, firmware won't start.

y503iiir and clones, y805128r2, y805128r2e - Network not implemented.

y805128, y805256 - Floppy support broken.

msx/msx2p

expert3i, expert3t, expertac, expertdx - Some hardware not emulated.

msx/msxtr

sfg extensions may not work due to irq callbacks being registered with the Z80 only; v9958 commands seem to execute too fast (several software items hang because of this); midi interface operation on fsa1gt needs verifying, needs implementation of DAC/PCM related hardware/filter and hook up to the S1990; microphone input is missing-

multitech/mpf1

cs113

mupid/mdisk

It boots from floppy, so presumably only needs an emulated main system to work.

mupid/mupid2

Skeletonish. Z80 based.

nakajima/nakajies

Banking not fully understood, keyboard communications are partially hacked and misses PCMCIA slot.

namco/20pacgal

25pacman - Newer set on slightly different hardware.

namco/cswat

The game utilizes a projector. Can it be simulated with external artwork? Interrupts need to be improved.

namco/gal3

In need of laserdisc dump. Skeleton driver.

namco/namcona1

bbbingo, bbbingot, zelos, zelost - Medal games with main - satellites setup. Communications need emulating.

namco/namcond1

gynotai - Ball sensors aren't understood.

namco/namcos10

ballpom, ippo2, keroro, medalnt and clone, medalnt2, nflclsfb, puzzball and clone, sekaikh, sugorotc - Need additional I/Os emulated.

gegemdb, kd2001, slotouji - Not decrypted yet.

pacmball, sekaikha - Bad dumps.

taiko2, taiko3, taiko4, taiko5, taiko6, taikort - Small timing issues.

namco/namcos11

fambowl - Needs additional I/O board emulation.

namco/namcos12

sws2000, sws2001 - DMA problems.

tektagtjb, tektagtja - Bad / incomplete dumps.

namco/namcos21_c67

aircombj, aircombu - No polygons displayed.

cybsled and clone, solvalou - They crash.

namco/namcos21_de

driveyes - Uses 3 screens with dedicated board for each.

namco/namcos22

dirtdash - Bad dump.

ridgeracf - Incomplete dump. Very different version.

namco/namcos23

Many aspects of the hardware are not completely understood.

namco/sweetland

Screenless crane machine. Mechanical parts aren't emulated.

nasco/crgolf

mastrglf - There's a custom CPU box, main cpu banking and communications with sub cpu aren't understood. Possibly protected.

nasco/suprgolf

albatross - Missing GFX ROMs dumps.

natsemi/icm3216

Missing configurable ram size (1M, 2M, 4M, 8M), iop and scsi, cpu timing and minibus.

natsemi/sys16

Fails some diagnostic tests. Needs implementing of gpib, printer ports, sio/disk/tape boards.

ncd/ncd68k

Preliminary driver. MC68020 based.

ncd/ncdmips

Preliminary driver. MIPS based.

ncd/ncdppc

Preliminary driver. Power PC based.

nec/apc

Several major features still unimplemented, available software doesn't make use of them.

nec/bungo

Dump is incomplete and components are guessed as there's no documentation.

nec/pc6001

Undumped MCU dump (i8049, controls tape and keyboard). We currently hack tape loading to directly inject contents directly into RAM, would be hairy to support without the actual dump.

Needs daisy chain support for all connected devices that can send an irq event, emulation suffers from irq miscatches especially from keyboard and timer.

FDC is unemulated (unknown part #), it also diverges between pc6001 and pc6601.

Video chip is a M5C6847P-1, a derivative of MC6847, later pc6001mk2 uses a(n unknown part #) superset with black instead of green as typical background pen and a new "Mode 5" gfx, which can do nasty mid-scanline effects (cfr. Tiny Xevious Mk 2, where it draws score display portion with different mode than gameplay).

pc6001mk2 also has a μpd7552 voice chip, unemulated (cfr. Chrith Ai no Tabidachi / クリス 愛の旅立ち intro)

pc6001sr is yet again a superset of the older HWs, no way to surpass the initial PC-6001MK2SR World screen (again irq misfire off the bat?).

nec/pc8001

Very preliminary emulation. Big TODO at the top of the driver.

nec/pc88va

pc88va jumps off the weeds with two bogus opcodes (noted in source)

pc88va2 no SW loads up due of missing μpd71071 DMA demand mode (required by the FDC device).

Unemulated plain PC8801 compatibility mode.

nec/pc9801

Extensive TODO list on top of driver.

nec/pc9801_epson

Extensive TODO list on top of driver.

nec/pc9821

Extensive TODO list on top of driver.

nec/pc98ha

Extensive TODO list on top of driver.

nec/pcfx

Needs front panel and storager emulation. Currently there's no disk controller, so only possible to boot into the monitor.

neogeo/neogeo

kog - Bootleg with different protection.

mvstemp - Development board. Unemulated.

sbp - Possibly protected.

stakwindev - Development board. Has battery-backed SRAMs for some of the program, which makes it likely impossible to emulate as the content of the SRAMs is lost due to dead battery.

nichibutsu/cclimber

bagmanf - Bootleg on different hardware.

nichibutsu/galivan

youmab, youmab2 - Weird bootlegs, they have logic issues (always invincible, power ups can be freely selected).

nichibutsu/hrdvd

Implementation of DVD routing and YUV decoding is missing. MPEG chip is only stubbed for now.

csplayh1 - runs on Super CD HW, Inputs don't work at all, slower than the others too.

nichibutsu/nbmj8688

nightlov - Input problems.

nichibutsu/nbmj8891

hnageman, hnxmasev - Missing VHS dump.

nichibutsu/nbmj8991

av2mj1bb, av2mj2rg - Missing VHS dump.

nichibutsu/nichild

ldquiz4, shabdama - Miss laserdisc dumps. Preliminary driver.

nichibutsu/nightgal

sexygal, sgaltrop, sweetgal - Missing protection simulation.

nintendo/aleck64

mtetrisc - Uses additional 2d sprite overlay for tetrominoes gfxs, mostly working minus gfx decoding itself.

nintendo/cham24

Missing coins and timer due to unemulated Amtel MCU.

nintendo/dkong

dkongjrc, dkongddk - Graphic ROMs not switched.

nintendo/gb

mduckspa - Clone with some differences.

nintendo/gba

robotech - Single game reissue of "Robotech - The Macross Saga (Euro, USA)" on the GBA but with double sized ROM (BIOS replacement in first half?) and other mods. It is unclear how compatible this is with standard hardware.

nintendo/n64_gateway

Actual LodgeNet system is not emulated, so the extra controller buttons and other system functions are not implemented.

nintendo/nds

Driver is preliminary. Currently WIP.

nintendo/nes

drpcjr, sb486 - Missing mice, keyboard and floppy drive support.

fctitler - Misses emulation of the switch that selects which boots: builtin vs cart.

nintendo/nes_arcade_bl

Z80 for timer and maybe coinage isn't implemented.

nintendo/nes_clone

Differences from the original hardware aren't emulated yet.

nintendo/nes_m82

Supports up to twelve cartridge slots, currently unimplemented.

nintendo/nes_sh6578

Enhanced SH6578 NES clone hardware. Differences not emulated yet.

nintendo/nes_vt02_vt03

ablping, cbrs8, mc_105te, megapad, protpp, rfcp168, senwld, vdogdeme, vdogdemo, vtboxing, vtpinball - These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.

nintendo/nes_vt09

rbbrite - Possibly different hardware (VT369?).

nintendo/nes_vt32

dgun13201, dgun13202 - These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.

nintendo/nes_vt369_vtunknown

These NES clones have modified hardware. Differences aren't fully implemented yet, causing these games not to work properly.

nintendo/nss

Menu system is only partially understood.

nintendo/sfcbox

Preliminary driver. SNES based.

nintendo/snesb

ffight3b - Protection patched out for now, should be emulated.

nintendo/vt_unknown

Unidentified main CPU. Dump might be bad.

nintendo/vt1682

gm235upc - Needs IO ports on sound CPU side and write access to space for RAM.

intg5410 - Controls not hooked up and sometimes it crashes on game change.

lxts3, njp60in1, unk1682 - Random number generator broken, missing line scroll mode emulation.

wowwg - Needs high colour line mode for main menu.

nix/fitfight

hotmindff - Scrolling offsets + inputs need to be fixed.

nmk/nmk16

firehawkv - Incomplete dump.

powerinsc - Sprites are in a different format which hasn't been decoded yet.

tdragonb2 - Runs too fast. Probably IRQs related.

nokia/dbox

Needs GALs dump / decoding, debug terminal and demuxer work.

nokia/mikromikko2

Computer. 80186 based.

olivetti/m20

Needs a proper Z8001 CPU core.

olivetti/olivpc1

Keyboard not working yet.

olympia/monzagp

Preliminary driver. Possibly missing a ROM.

olympia/portrait

Lots of GFX problems.

olympia/vega

Controls aren't correctly hooked up and objects aren't properly positioned.

olympiaint/olyboss

Not all programs work. Some floppy problems.

olympiaint/olytext

Skeletonish. Z80 based.

orca/zodiack

bounty2 - Different memory map. Probably something in the epoxy module marked "CPU PACKII".

osi/osi

c1pmf -

pacman/pacman

sprglobp2 - Encryption not figured out yet.

pacman/schick

Hack of Pengo. It has been decrypted but there is some additional protection.

palm/palm

Newer models' differences aren't emulated yet.

pc/asst128

A ROM isn't dumped.

pc/at

Assorted PC-AT clones. Only preliminary emulation.

pc/atpci

Pentium and PCI emulation still preliminary.

pc/calchase

calchase - Has mangled Win 98 dump (need to type boot at DOS prompt), in-game sports some video bugs, inputs are sketchy and no steering is implemented.

hostinv - "DISK BOOT FAILURE", trying to save BIOS settings causes black screen (shadow RAM issue), disk dump itself doesn't seem ISO 9660 complaint (protection?)

pc/champ2

Jumps in unpopulated RAM area as soon as it banks (PC=ca029 -> 0000:36AF), area may be multibanked instead.

pc/compc

Preliminary driver. I8088 based. Boots with a timer2 error.

pc/dawg

Fails CPUID, actual Southbridge model unemulated.

pc/ec184x

ec1845 - Differences to the other models aren't emulated yet.

pc/ibmpc

ibm5140 - It doesn't boot.

pc/ibmpcjr

ibmpcjx - Dump is incomplete.

pc/iskr103x

iskr1030 - Keyboard test doesn't pass.

pc/mc1502

pk88 - Missing video and keyboard emulation.

pc/pangofun

pangofun - PC based hardware, possibly bad / incomplete dump.

pc/pc

Generic driver for ibm5150 derived PCs. Most machines' specific details haven't been implemented yet.

pc/pcat_dyn

toursol1 - Protection check hasn't been patched out, like it has in the parent.

pc/pcat_nit

streetg and clones - PC hardware emulation is still incomplete.

pc/przone

Correct motherboard / BIOS hasn't been identified yet, mouse is currently hooked up instead of trackball. Printer error B0 keeps popping in attract/game select.

pc/sis630

Preliminary driver. Big TODO on top of file.

pc/teradrive

Half PC, half megadrive. Missing the whole megadrive part.

pce/ggconnie

Hardware is PC-Engine Supergrafx based. RTC & hopper not emulated.

pce/paranoia

Jamma interface is not emulated.

pce/tourvis

Lacks complete jamma interface emulation.

philips/cdi

General CDI emulation suffers from incomplete simulation of the SLAVE and CDIC MCUs.

quizardff - Misses MCU dump.

philips/vg5k

1200 bauds cassette doesn't work.

philips/yes

Very preliminary driver. HD6845 drawing not implemented.

phoenix/phoenix

fenix - Bootleg, to be checked closer. Dump is incomplete.

griffono - Hangs during attract mode or after coining up.

pinball/allied

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

pinball/by17

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

pinball/by35

Pinball hardware. Not playable without mechanical part simulation.

pinball/gp_1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

pinball/gts1

Pinball games. Emulation is (almost) complete, but the missing simulation of the tables makes them unplayable.

pinball/icecold

Mechanical arcade games which need simulation of the mechanical part to be playable.

pinball/missamer

Mainly there's no ball physics simulation.

pinball/recel

Pinball games. Preliminary, and the missing simulation of the tables makes them unplayable.

playmark/sderby

croupier and clones, magictch, tropfrt - Protection MCU handles win rates etc. Correct win behavior is critical to this gambling games functioning as expected, so simulation probably doesn't make sense.

positron/positron

Computer. MC6809 based. Emulation is very incomplete due to missing info.

psikyo/psikyosh

s1945iiibl,s1945iiibla - Sprites only show up if launched with -debug.

psion/psion

psion1 - Peculiarities of this model aren't emulated.

psion/psion3

Needs emulation of battery backed RAM.

psion/psion3a

Needs emulation of battery backed RAM, sound devices, serial ports and fixing of RAM detection for 3mx.

psion/siena

Needs emulation of battery backed RAM.

psion/workabout

Needs emulation of battery backed RAM.

quantel/dpb7000

Disk Sequencer Card emulation is preliminary.

qume/qvt70

Preliminary emulation. No inputs.

regnecentralen/rc702

Needs floppy emulation to be able to test and emulate more features.

regnecentralen/rc759

Needs better I82730 emulation.

robotron/a5105

There's a hang while scrolling and cassette loading (bit 7 of port 91) needs work.

robotron/a51xx

Skeleton driver. 65C816 based.

robotron/a7150

Needs MMS16 (Multibus clone) and slot devices emulation, native keyboard and more work on the A7100 model.

robotron/k1003

Skeleton driver. I8008 based. Keyboard isn't emulated.

robotron/k8915

Skeleton driver. Z80 based. Chargen ROM isn't dumped.

robotron/z1013

z1013k69, z1013k76, z1013s60 - Hardware differences aren't emulated yet.

rockwell/aim65_40

Skeleton driver.

roland/roland_cm32p

Synth. Sound isn't emulated yet.

roland/roland_d10

Expander. Sound isn't emulated yet.

roland/roland_d50

Skeletonish. Synthesizer. UPD78312 based.

roland/roland_mt32

Skeletonish. Expander. P8098 based.

roland/roland_pr100

MIDI sequencer. Needs emulation of the gate arrays.

roland/roland_sc55

Skeletonish. Expander. P8098 based.

roland/roland_sc55mk2

First off it needs a H8/500 series CPU core.

roland/roland_tb303

Bass line. NEC_D650. Sound unemulated (discrete).

roland/roland_tr909

Drum machine. UPD7810. Sound unemulated.

sage/sage2

Floppy loading doesn't work.

sanyo/phc25

map1010 - Tape control not implemented yet.

sega/bingoc

bingoc - Needs to be connected to the terminals. Sound banking could be wrong.

sega/chihiro

X-BOX hardware emulation is still preliminary, but some games boot, albeit slowly.

sega/coolridr

aquastge - coin pusher, some video bugs, never completes RAM test, some inputs aren't hooked up.

sega/dc_atomiswave

Most games show something and some are playable, but emulation is still incomplete.

sega/dccons

Dreamcast emulation is preliminary. Big TODO at the top of the driver, not extensively tested.

sega/flashbeats

Preliminary driver. H8/3007 based.

sega/fwheel

Communications with other boards aren't implemented yet, causing missing controls.

sega/gpworld

Laserdisc hardware. Works in theory, but is waiting for a good quality laserdisc dump. Does have a small list of TODO items that could be looked at prior to a disc dump.

sega/hikaru

Skeleton driver.

sega/hshavoc

Genesis hardware, but uses a PIC to control state based encryption. All the code that matches the Megadrive version has been decrypted, but the extra code (startup code, coins etc.) appears to have some annoying extra encryption.

sega/kopunch

Boxing bag game. Sensors aren't emulated, so it isn't "playable".

sega/lindbergh

Skeleton driver. Pentium 4 / Celeron based.

sega/megadriv_acbl

bk3ssrmb - The mechanism to switch between the 2 games hasn't been identified yet.

jparkmb, twinktmb - Undumped PIC controls at least coins and dips. Crude simulation causes problems in detecting coins.

sonic3mb - Undumped PIC.

srssf2mb - Both games seem to expect starting in the 0xf00000 range.

sega/megadriv_rad

ra145 - Bad dump.

sega/megadriv_sunplus_hybrid

SunPlus side isn't hooked up.

sega/megadriv_vt_hybrid

VT side isn't hooked up.

sega/megaplay

mp_bio - Frequently softlocks after continue, usually on the 2nd stage.

mp_shnb3 - Game softlocks if you coin during the intro sequence.

sega/megatech

Incorrect behavior at time out and there are some sms based games which aren't yet fully supported.

sega/model1

netmerc - Guesswork incomplete on the math copro dsp functions and program impossible to dump without decapping.

vf - Collision detection is broken due to imperfect TGP RAM port emulation or hookup.

sega/model2

Implementation of the 3D systems is either guesswork (Model 2, 2A) or incomplete (Model 2B, 2C).

hpyagu98 - Stuck at boot with 'error #1' message.

rascot2 - Probably part of a multiple unit setup (server, terminals, video boards).

sega/model3

Driver is still preliminary. Most games boot and show something.

sega/naomi

Most games show something and some are playable, but emulation is still incomplete.

sega/sderby2

The video CPUs are waiting for commands from another source. It is assumed that there is at least one other PCB (834-5526?) which drives the video PCBs and perhaps generates sound. The satellite PCB is emulated in sg1000a.cpp.

sega/sega_ferie

Inputs problems.

sega/segaai

Cassette isn't correctly implemented yet.

sega/segaatom

Preliminary driver. H8S/2373 based.

sega/segac2

pclub, pclubj, pclubjv2, pclubjv4, pclubjv5 - Need camera and printer handling.

sega/segafruit

Decryption may still not be 100% correct yet.

sega/segag80r

astrob1 - Dies when you first start.

sega/segahang

endurob2 - Bad dump.

sega/segald

Laserdisc hardware. Has a small list of TODO items that could be looked at prior to a disc dump.

sega/segapm

Skeleton driver. Sega 32X based.

sega/segas16b

fpointbla - Bootleg with different memory map / registers. Misses bgfx and sprites aren't correctly aligned.

dddoor, wfishing - Needs correct inputs / outputs.

sega/segas18

pontoon, pontoona - Only the terminal is dumped. pontoona might be the main unit, but needs the FD1094 dumped.

sega/segas24

sspirtfc - Missing floppy image.

sega/segas32

as1 - Needs laserdisc dump and emulation.

sega/segasm1

bingpty, carboule - Satellite boards. Need dump of the other boards.

blicks, tinkerbl - Inputs (inserting a coin freezes some of the text on screen).

sega/segasp

Hardware is very similar to naomi, see naomi.cpp. Moreover it needs RFID device emulation.

sega/segaxbd

rascot - Only the terminal is dumped.

sega/segaybd

pdrift and clones - They lock up. TAS opcode related?

sega/sg1000a

sderbys - Satellite board. The main board needs to be dumped. Only partially decrypted.

sderby2s - Satellite board. The main board needs to be dumped. Also inputs aren't hooked up.

sega/shtzone

Gun doesn't work. Actual timer doesn't seem to match what's set by the dips.

sega/sms_bootleg

Missing timer, banking non totally implemented.

sega/speedbsk

speedbsk - Mechanical, extensive TODO at the top of the driver.

sega/stv

choroqhr - One ROM is a bad dump.

decathlt, decathlto - Run very slow and lots of GFX glitches.

dfeverg, fanzonem - Require SH2's SCI serial port emulated, to communicate with coin/medal-related I/O board. dfeverg also is missing a ROM.

finlarch, smleague - Randomly hang / crash. They work with a ridiculous MDRV_INTERLEAVE number, might need strict SH-2 synching.

magzun - I/O errors.

nclubdis - Unemulated security card.

nclubv3, pclub2 and clones, pclub3, pclubpok, stress - Unemulated printer.

sackids - Runs with a dedicated bios which isn't dumped.

sfish2, sfish2j - CD handling broken. Needs MPEG decoder.

twcup98, twsoc98 - Some situations with the GK result in the game stalling.

vfremix - Texture upload issues in some cases, see source.

yattrmnp - Needs emulation of the medal game specific hardware.

sega/system16

bayrouteb1 - Broken sprites (missing IRQ?).

altbeastbl, altbeastbl2, bayrouteb2, beautyb, bloxeedbl, dduxb1, eswatb1, fpointb1, fpointbj, goldnaxeb1, goldenaxeb2, iqpipe, passshtb, passht4b, shdancbla, shinobld, shinoblda, tturfb1, wb3bb1, wb3bble - Bootlegs on different hardware.

timescanbl - Encrypted.

sega/timetrv

timetrv2 - Needs laserdisc dump for this ROM, which has different frame indexes from the parent.

sega/vicdual

carnivalca - One of the program ROMs need a redump.

invho2a - Bad colors (wrong for Invinco, all black for Head On 2) render the games unplayable. Multiple dump attempts of the color PROM have given the same result.

seibu/airraid

airraid, cshooter - GFX ROMs in black 'blobs'.

seibu/banprestoms

Need emulation of the card printer / dispenser.

seibu/deadang

popnrun and clone - GFX ROMs aren't dumped. They are inside an epoxy block, similar to the Air Raid one.

seibu/legionna

cupsoc and clones - Complex Seibu 'COP' protection device. Most functions have been emulated, but glitches remain which makes games not completely playable.

seibu/panicr

Collision detection is broken.

seibu/raiden_ms

Bootleg on Modular System, heavily modified from the original. V30 based.

seibu/raiden2

zeroteam and clones, xsedae - Complex Seibu COP2 protection + banking (probably linked to the protection).

seibu/seibucats

Needs DVD emulation first, lots more.

seibu/seicupbl

These bootlegs don't have the COP protection of the original. It hasn't been figured out yet how they replace it.

seibu/stfight

cshootert - GFX ROMs are contained in black "blobs" and thus undumped.

seta/macs

macsbios -

mac2bios -

kisekaem -

kisekaeh -

cultname -

seta/namcoeva

Whack-a-mole type games. Inputs aren't emulated yet.

seta/seta

inttoote - Unemulated protection.

zingzipbl - Bootleg on different hardware.

seta/seta2

ablastb - Bootleg on different hardware. At least the "tilemap sprite" y offset flags are different.

namcostr - Bad dump. The game has mechanical parts.

staraudi - Needs flipscreen hooked up properly with new code to function at all.

seta/simple_st0016

dcrown, dcrowna - Slightly different hardware.

mayjinsn -

sfrj/galeb

Cassette isn't working yet.

sfrj/idpartner

Preliminary driver. Z80 based.

sfrj/orao

Cassette isn't working yet.

sfrj/tim011

Skeleton-ish. Z180 based.

sgi/crimson

Skeleton driver. MIPS based

sgi/indy_indigo2

indigo2_4415 - The different hardware isn't emulated yet.

sgi/iris_power

Skeleton driver. MIPS based.

sgi/o2

Skeleton driver. MIPS based.

sgi/octane

Skeleton driver. MIPS based.

sgi/tt

Needs graphics and emulation of the variants.

sharp/fontwriter

Extremely preliminary driver. The M37720 core is missing DMAC support.

sharp/pce220

pcg850v -

siemens/pcmx2

Personal computer. NS32016 based.

siemens/pg685

Preliminary driver. NEC V20 based.

sigma/sigmab52

s8waysfc -

sigma/sigmab98

dashhero - Does not acknowledge the button bashing correctly.

sinclair/atm

atm -

sinclair/zx

lambda, pc8300, pow3000 - Fail to show text.

zx97 - Unemulated bankswitching.

skeleton/adacp150p

ASCII printer adapter. Does not do much more than pass the extensive self-test.

skeleton/alphasma

Needs work on ADB and PS/2. The charset ROM is wrong.

skeleton/ax20

Skeleton driver.

skeleton/bert

Preliminary driver. Z8671 based.

skeleton/bitgraph

bitgrphb -

skeleton/bpmmicro

Universal device programmer. 286 based.

skeleton/br8641

Preliminary driver based on guesswork. Needs documentation.

skeleton/candela

can09 - Preliminary driver: among other things needs keyboard, 6845 CRTC and FDC support.

skeleton/cdc721

Skeleton driver.

skeleton/ckz80

No documentation available, so driver is mostly guesswork. If fdc is enabled in address map, it hangs waiting for a fdc response. Otherwise, it displays an error, and you can press a key to try again.

skeleton/codata

Very preliminary driver.

skeleton/controlid

Fingerprint reader device. Very skeletonish.

skeleton/cortex

Skeleton driver.

skeleton/cxhumax

ROMs are badly dumped / missing.

skeleton/daruma

Printer. Very preliminary driver.

skeleton/datacast

Unimplemented keypad, incomplete SAA5240 emulation.

skeleton/design

Tobacco vending machines. Don't accept coins, possibly because of unemulated coin selectors.

skeleton/digel804

Needs removing of the ACIA hack in digel804_state::acia_command_w, minor finishing touches to i/o map, EPROM socket stuff (ports 0x40, 0x41, 0x42 and 0x47) and artwork.

skeleton/digijet

Engine Control Unit (ECU). Skeleton driver. Uses an I8049.

skeleton/digilog320

Needs finishing floppy hookup; SCC interrupts; unknown DUART inputs/outputs; RS232; RTC; artwork with LEDs.

skeleton/dim68k

Very preliminary driver. Big TODO at the top of the driver.

skeleton/dm7000

Preliminary driver.

skeleton/dsb46

Preliminary driver.

skeleton/dual68

Skeleton driver.

skeleton/epic14e

Misses keyboard emulation.

skeleton/eurit

Preliminary driver. ISDN-Telefon. M37730S2 based.

skeleton/fanucs15

Skeleton driver.

skeleton/fanucspmg

Needs verifying VRAM hookup, hooking up enough keyboard to get it to boot a floppy.

skeleton/fc100

Understand how 600 baud is selected for cassette. Hook up graphics modes and colours. Unknown i/o ports. Needs cart software (current code is just a guess).

skeleton/fk1

Preliminary driver.

skeleton/ft68m

Skeleton driver.

skeleton/grfd2301

Preliminary driver. Dump isn't complete.

skeleton/hazeltin

Preliminary driver.

skeleton/hazl1420

Preliminary driver. Chargen not dumped.

skeleton/hprot1

hprot2r6 - LCD commands are sent, but nothing shows up on screen. Needs ADM695AN emulation.

hprotr8a - Loops during boot displaying an error message related to low power supply voltage. Needs ADM695AN emulation.

skeleton/hudson_poems

Xtensa CPU core isn't complete.

skeleton/i7000

Preliminary driver (NSC800 based).

skeleton/icebox

Z80 based. Floppy drives aren't hooked up. Unknown ports.

skeleton/if800

Skeleton driver. I8086 based.

skeleton/imsai

Banking and dip-switches aren't implemented. I8085 based.

skeleton/indiana

Preliminary driver.

skeleton/itc4

Skeletonish. Temperature controller. Z80 based.

skeleton/itt3030

Keyboard isn't properly hooked up. Other problems at the top of the driver.

skeleton/jade

If you hit a key as soon as it is started, the system will present a prompt and work. Otherwise it runs into the weeds because the ROM banking isn't yet emulated.

skeleton/jonos

Skeleton driver. I8085A based. No info available.

skeleton/juku

Needs display mode 384x200, sound, possibly tape and network. Floppy interface isn't understood, though it works enough with the only disk available.

skeleton/kron

Needs keyboard fixing and understanding how to hook up the real char table.

skeleton/lg_dvd

USB DVD writer. Skeleton driver. MT1839 based.

skeleton/mfabfz

Driver still in the early stages of development. No inputs are hooked up.

skeleton/mice

Very preliminary driver. No schematics available.

skeleton/micro20

Skeleton driver. Uses a 68020 and a 68881 FPU.

skeleton/micronic

Needs IR I/O port, LCD contrast and backlight emulation.

skeleton/miniframe

Preliminary driver. M68010 based.

skeleton/ml20

Needs currently unimplemented V25 features (serial, etc.).

skeleton/ms9540

Incomplete dump, no documentation available.

skeleton/onyx

Main screen prints an error with CTC (because there's no clock into it atm). Devices aren't hooked up yet.

skeleton/plan80

Autorepeat on the keyboard is broken. Not all devices have been hooked up.

skeleton/proteus3

Cassette and keyboard need work.

skeleton/pwp14

Word processor. Z80 based.

skeleton/rd100

No infos available but some PCB pictures. MC6809P based.

skeleton/rvoice

Skeletonish. HD63701Y0 based.

skeleton/sacstate

The weird characters that show on screen are various escape sequences. These are different depending on the terminal type chosen. The codes need to be understood and emulated before this system makes sense.

skeleton/sartorius

Preliminary driver.

skeleton/sbrain

Keyboard needs improvements, missing expansion bus slot emulation.

skeleton/scopus

Keyboard isn't emulated.

skeleton/shine

Preliminary driver. Everything needs to be verified.

skeleton/sk101bl

Trading terminal. I80C31 based. Preliminary.

skeleton/systec

Skeletonish. Most devices aren't hooked up. Z80 based.

skeleton/tavernie

Incomplete dump. GFX and cassette need fixing.

skeleton/teleray10

Terminal. M6502 based. Preliminary driver.

skeleton/terak

LSI-11 based. Really a skeleton driver, few infos available.

skeleton/testpat

Discrete. Preliminary netlist available.

skeleton/tk635

Undocumented custom chip controls most functions.

skeleton/tulip1

No 8256A MUART emulation which handles interrupts, timers, serial and parallel interfaces.

skeleton/vector3

Preliminary driver. Extensive TODO on top of the driver.

skeleton/xor100

Cassette and floppy aren't working.

snk/dmndrby

Electrocoin on snk hardware. Needs better video emulation. Enters service mode while attract mode is running.

snk/hng64

ROZ layer rotation not understood, some 3d glitches, several priority issues (i.e. buriki gameplay and attract mode), sams64_2 flickers like mad and "press start button" always displayed in game, racing games uses unemulated network CPU which most likely interferes with logic and currently kludged to work to some extent.

sony/dfs500

Emulation of the video hardware (DSP signal path) for GFX processing is still needed.

sony/news_68k

Needs mouse and keyboard, graphics and slots emulation.

sony/news_r4k

Needs more complete floppy support (only supports floppy boot at the moment), NetBSD SCSI support (mostly/entirely changes needed in the SPIFI driver), parallel I/O, remaining kb/ms support and APbus expansion slots.

sony/taitogn

kollon, sianniv - IRQ at the wrong time.

sony/zn

bam2 - Lacks music (which streams from a hard disk under the control of an H8/3644 MCU).

beastrzb - Incomplete dump.

primrag2 - Watchdog reset at startup.

strider and clones - Random hangs / crashes.

stern/cliffhgr

cliffhgra2 - Fails a start up check.

goaltogo - Laserdisc game. Works in theory, but is waiting for a good quality laserdisc dump.

subsino/lastfght

Game speed seems to be completely wrong, timers and player movement too fast?

subsino/subsino

dinofmly and clone - Stop at password check. Probably need a preinitialized NVRAM.

mtrainnv - Subsino sold a "Settings/Clear ROM" for some released titles. These devices are *extremely* expensive (and ultra rare, only sold to big casino corporations), and should be placed in the empty socket to fix a dead board due to NVRAM corruption. A version of Magic Train running on subsino.cpp (unlike mtrain, which is needed to match this program ROM.

ndongmul - Not looked at yet.

grndprix, newhunter, newhunterb, sevenlnd - Tilemaps, lamps and inputs troubles.

newhunterc - Needs correct memory map.

subsino/subsino2

qbeebing, strain, tbonusal, treacity and clone - Possibly missing some protection patches.

queenbee and clones, squeenb - Games run way too fast.

treamary - Gets stuck on CHIP1 test, enters test mode if bypassed.

xplan - Always starts with 4 credits. Interrupts don't seem to work correctly.

suna/suna8

hardhea2b, hardheadb2 - Protected bootlegs on different hardware.

sunelectronics/blockch

Paddle/ball sprite drawing is guessed, video timing is wrong, 2nd irq timing is guessed.

sunelectronics/route16

jongpute - Palette problem makes the tiles difficult to recognize.

vscompmj - Inputs don't seem to work correctly.

synertek/ktm3

Only a few address lines are decoded at all. The resulting mirroring might not be accurately emulated yet.

synertek/mbc020

Computer. M6512 based. Skeletonish driver.

ta/alphatpc16

SCSI emulation is guessed / incomplete.

ta/alphatpx

Preliminary driver. Currently only shows the initial boot message. I8085A based.

tab/tabe22

Needs a dump of the keyboard controller (currently HLE'd), NVRAM / memory layout isn't correct, currently needs a hack to send out data on the RS232 port.

taito/2mindril

Missing working simulation of the sensors. Requires a major rework of the artwork sub-system.

taito/arkanoid

arkatour2 - Undumped MCU.

hexaa - Protection hasn't been figured out yet.

taito/bublbobl

bub8749 - Uses a different MCU, dumped but needs to be hooked up.

taito/cchance

Imperfect hopper emulation makes this game to not coin up and gives "hopper time out errors" when you win.

taito/cpzodiac

Punching bag game with red dot matrix display. Z80 based.

taito/grchamp

grchampa - Uses different ports. Possible bad dump.

taito/gsword

josvolly - Incomplete MCU hook up.

taito/kikikai

mexico86a -

taito/lgp

Laserdisc game. Has a small list of TODO items that could be looked at prior to a disc dump.

taito/marinedt

Collision detection has some problems.

taito/nycaptor

cyclshtg - Missing (protection?) MCU dump.

taito/sbmjb

Needs hopper emulation.

taito/taitoair

ainferno and clone - Missing landing monitor camera (blackened), 3d HUD graphics; expert course has wrong 3d geometry; almost surely crashing during replay has missing smoke effect, looks quite odd atm.

taito/taitojc

dangcurv and clones - DSP bug causes missing 3D. Currently hang after initial tests.

taito/taitopjc

Inconsistent frame rate compared to PCB recordings; game has a tendency to freeze frame hiccup.

taito/taitotx

Preliminary driver. PC based.

taito/taitotz

Preliminary driver.

taito/taitowlf

Missing coin inputs.

taito/taito_f2

footchmpbl - Bootleg on different hardware. It has very different hardware registers.

taito/taito_f3

bubsymphb, bubsymphba - Bootleg on different hardware. Backgrounds don't show up. Seems to make a different use of priority RAM.

taito/taito_o

Driver still in preliminary stages. TODO: inputs (coins), NVRAM, sprite priorities, dips, interrupts (sources).

taito/wgp

Recently demoted to not working status.

tandberg/tdv2324

I8085A based. CPU gets stuck reading i/o port 0x30 in a loop.

tangerine/alphatan

Unemulated SAA5070 device.

tatsumi/kingdrby

cowrace - Incomplete dump.

tatsumi/tatsumi

Very complex GFX hardware hasn't been fully emulated yet.

tch/wheelfir

Games suffer from heavy glitching. Some are also incomplete prototypes.

teamconcepts/comquest

Skeleton driver.

technos/ddragon

ddragon6809, ddragon6809a - Bootlegs on different hardware, encrypted.

tecmo/gaiden

mastninj - Sprites, sound and y-scroll need fixing.

tecmo/tehkanwc

tehkanwcc - Bootleg with different inputs.

tektronix/tekigw

Needs am9516 dma controller, slots and cards, gpib devices, graphics and keyboard.

telercas/tmc1800

osc1000, tmc1800 - No ROM dump available.

televideo/tv912

Terminal. I8035 based.

televideo/tv950

Keyboard isn't working properly.

televideo/tv955

Terminal. M65C02 based.

tesla/ondra

Cassette isn't working yet.

tesla/sapi1

sapizps3 and clones - They try to read a disk and stop responding after showing the logo.

thepit/thepit

theportr - Wrong colors render the games unplayable. The PCB has the PROM for The Pit, colors confirmed the same on PCB and in emulation. Bootlegger or operator error in fitting the wrong PROM?

zaryavos - Incomplete dump.

ti/exelv

EXL 100 cannot be emulated because the ROMs are not dumped. EXELTEL stops early in the boot process and displays a red error screen, presumably because the I/O processor is not emulated.

ti/ti85

ti73b, ti83, ti83p and clones, ti83pse and clones, ti84p and clones, ti84pse and clones - Emulation of these models hasn't been started yet.

ti/ti931

Preliminary driver. Z80 based.

tigertel/gizmondo

Preliminary driver.

toaplan/dt7

Preliminary driver. Big TODO at the top of the file.

toaplan/pipibibi

pipibibsbl2 - Bootleg on different hardware.

toaplan/raizing_batrider

nprobowl, probowl2 - Mechanical part isn't simulated.

toaplan/slapfght

tigerhb4 - 68705 MCU has been dumped, but not hooked up yet.

toshiba/paso1600

Chargen and kanji ROM aren't dumped. FDC isn't identified (missing software anyway).

toshiba/pasopia

Missing emulation of the FDC and other I/O expansions.

trainer/dolphunk

It is not possible to save / load programs.

trainer/pro80

Missing interrupt emulation, cassette load needs fixing.

trainer/tk80

ics8080 - Keyboard problems.

trs/dgn_beta

Machine never boots.

trs/lnw80

Floppies don't work.

trs/max80

Computer. Z80 based. Currently stuck because floppy reading fails.

trs/radionic

Tape and floppy support are problematic.

trs/trs80

all sets but trs80 - Most floppies don't boot (regression).

trs/trs80m3

cp500, trs80m3 - Most floppies don't boot (regression).

trs80m4 - Boots model 3 floppies, but not model 4 ones.

trs80m4p - Completely different memory map.

tvgames/elan_eu3a05

airblsjs, buzztime, pvmilfin - Preliminary emulation.

carlecfg - Unimplemented GFX modes, big GFX glitches.

pvwwcas - Controls aren't working yet.

rad_tetr - Player 2 inputs don't work.

sudoelan - Might be slightly different hardware.

tvgames/elan_eu3a14

Preliminary driver.

tvgames/generalplus_gpl16250_nand

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/generalplus_gpl16250_rom

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/generalplus_gpl16250_romram

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/generalplus_gpl16250_spi

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/generalplus_gpl16250_spi_direct

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/generalplus_gpl162xx_lcdtype

bkid218, pcp8718, pcp8728 - Menus aren't working properly yet.

tvgames/generalplus_gpl32612

Newer hardware than the one in vii.cpp, new opcodes aren't emulated yet.

tvgames/spg110

Preliminary driver. Sunplus SPG110 based.

tvgames/spg29x

Need the internal ROM dump.

tvgames/spg2xx

ablkickb, abltenni, ordentv, rad_crik, rad_fb2, rad_sktv, tiktokmm, tvsprt10, vtechtvs, wfcentro - Inputs aren't hooked up correctly.

guitarfv - Timer issues make the music way too slow.

jouet - ROM checksum fails, but is expecting 0 as a result? Shows 'CopyRight' when booting normally? Protection?

tvgames/spg2xx_digimake

Camera and touchpad unemulated.

tvgames/spg2xx_ican

icanguit - Data saving doesn't work.

tvgames/spg2xx_jakks_gkr

jak_sdoo - Possibly a CPU bug causing some minigame to fail.

tvgames/spg2xx_jakks_tvtouch

Touchpad not emulated.

tvgames/spg2xx_senca

mywicodx, zon32bit - Banking not understood.

tvgames/spg2xx_skannerztv

Inputs aren't hooked up correctly.

tvgames/spg2xx_telestory

Sound data for the narrator is written to the SIO data port, which currently isn't implemented.

tvgames/spg2xx_tvgogo

Camera not implemented.

tvgames/spg2xx_wiwi

Inputs aren't hooked up correctly.

tvgames/st2302u_bbl_spi

ST2302U based. Emulation is preliminary.

bbl380 - Missing internal ROM dump.

tvgames/trkfldch

Preliminary driver. G65816 with custom vector?

tvgames/xavix

Preliminary emulation. Most games are not working, some have additional hardware on the PCB.

tvgames/xavix_2000

Preliminary emulation. Most games are not working, some have additional hardware on the PCB.

tvgames/xavix_2002

Preliminary emulation. Most games are not working, some have additional hardware on the PCB.

tvgames/xavix2

SoC emulation is very preliminary.

universal/superdq

Laserdisc games. Works in theory, but is waiting for a good quality laserdisc dump.

ussr/argo

Needs devices hook-up and cassette UART on ports C1 and C3.

ussr/b2m

Preliminary driver. FDC support is broken, among other problems.

ussr/bk

bk0010 - Error message at start. Thrown into monitor.

bk0010fd - Continually reboots. The system expects a ROM at A000.

bk0011m - Black screen at start, differences with the other systems in the driver aren't emulated.

ussr/cm1800

Peripherals aren't hooked up.

ussr/dvk_kcgd

Needs a K1801VM2 CPU core (interrupts and EVNT pin, full EIS set, other insns).

ussr/irisha

Preliminary driver. I8080 based.

ussr/istrebiteli

motogonki - Preliminary. Shows something on screen.

ussr/mikro80

Cassette save produces incorrect signal.

ussr/mk85

Skeleton-ish. K1801VM2 based.

ussr/ms6102

DMA problems, keyboard not emulated.

ussr/okean240

Very preliminary. Needs memory banking, floppy and cassettes, etc.

ussr/pk8000

pk8002 -

ussr/pk8020

bk8t - Keyboard not working, stuck at a "config" screen.

kontur - Needs to boot from a floppy and there isn't one available that works.

korvet - Can boot CP/M, but the keyboard then doesn't work.

neiva - Keyboard not working.

ussr/special

anakonda - It complains of a disk problem (not emulated).

erik - Should have colour and floppy disks, unknown how to access them. No disk software available.

lik Space and < keys not working.

pioner - Not all keys have been found (Function keys, Left-arrow, more?). Monitor ROMs missing, used ones from "special".

kharkovsky, specialm, specialp -

specimx - Machine tends to crash/freeze internally after a while.

unga - If you enter SYSTEM to exit basic, it corrupts itself and runs into the weeds. At the initial prompt, if you hit Enter it jumps to 0000 and thence into the weeds.

ussr/vta2000

Missing inputs.

videoton/tvc

UPM crashes when formatting a floppy.

votrax/votrhv

hc120 - Inputs are incomplete.

vsystem/f1gp

f1gpb - Steering wheel isn't correctly calibrated.

f1gpbl - Bootleg on different hardware.

vsystem/gstriker

gstriker and clones - Several GFX features aren't emulated yet, making the game almost unplayable.

vgoalsoc, vgoalsoca - Tecmo MCU providing jump addresses etc. Has direct access to entire CPU bus, prevents code modification (MCU writes 'ROM ERROR' if you change ROM). ROZ pitch difficult to understand.

vsystem/rpunch

svolleybl - Bootleg on different hardware (video registers are changed).

vtech/clickstart

Preliminary driver. UNSP based.

vtech/geniusiq

iq128, iq128_fr, iqtv512 - Very preliminary driver.

vtech/laser3k

Keyboard is only partially emulated, misses RGB graphics mode emulation, FDC C800 page appears to be inside the FDC cartridge (a dump is needed). Also misses Centronics printer port and cassette emulation.

vtech/lcmate2

RTC doesn't remember the time, alarm doesn't work and Reset/On button needs to be added.

vtech/pc2000

Z80 based.

vtech/prestige

Needs better IRQ timing, the mouse is too slow and sometime freezes, the memory banking isn't entirely understood, cartridges need to be implemented.

vtech/socrates

Extensive TODO at the top of the driver.

vtech/vsmileb

Improper handling of the "Fast Rampdown" feature in the SPG2xx audio device causes bad narration.

vtech/vtech1

vz200de - Not dumped yet.

wavemate/bullet

Memory banking is broken.

wavemate/jupiter

Preliminary driver. Devices aren't connected yet.

wicat/t7000

Missing cursor display and attributes.

wing/luckgrln

luckstrn - Undumped internal ROM.

wing/lucky74

excitbj - The program ROM for the terminal isn't dumped.

lucky74b - The program ROM seems incomplete or encrypted in some smart way.

lucky88 - No internal ROM dump.

wing/pinkiri8

Current blocker is the video emulation i/o ports, it looks somewhat exotic.

wing/slotcarn

Missing proper colors and reel support.

wing/superwng

Crashes after bonus stage, see notes, bad ROM?

wyse/wy60

Currently uses a bunch of hacks due to missing features in MAME's 8051 CPU core.

xerox/bigbord2

Main problem is floppy disk support is missing.

xerox/xerox820

bigboard, mk82, x820ii - Floppies don't work.

mk83, mojmikro, x168 - Slightly different hardware.

yamaha/tg100

Unemulated H8/520 CPU.

yamaha/yman1x

Control Synthesizer. Skeleton driver. HD6413002FP16 based.

yamaha/ymmu100

Missing a lot of effects.

yamaha/ymmu128

H8 core serial communication problems.

yamaha/ymmu5

Very preliminary driver.

yamaha/ymmu80

Missing a lot of effects.

yamaha/ymmu90

Missing analog inputs.

yamaha/ympsr340

Preliminary driver. Exact CPU model unknown. Front panel / keyboard scanner and sound generation aren't emulated.

yamaha/ympsr400

Missing HD63B05V0D73P dump.

yamaha/ymqy70

Preliminary driver.

yamaha/ymvl1

TMP68301 emulation of the serial comms isn't good enough.

yamaha/ymvl70

Missing a lot of effects.

zaccaria/seabattl

seabattla - Different hardware, needs emulation of its peculiarities.

zvt/pp01

Interrupt controller isn't emulated and cassette support is untested.