Let's Emulate Space Invaders

Introduction

Foreword

Emulating any system can be a daunting task, even to experienced software engineers. MAME can provide a good starting point, but can itself be quite daunting to get into. This series of articles should provide some insight into the way MAME works on a driver level and provide a good starting point for anyone who wants to contribute to pre-existing drivers in MAME.

What It Is

• An explanation of the most common structures found in drivers.
• A step-by-step guide on how to emulate a single game in MAME.
• A good starting point for a larger guide on the MAME source base.

What It Isn't

• A guide on how to write an emulator.
• A guide on how to work with MAME's core systems.
• A guide on how to port MAME to other systems.
• A pipe.

Structures

Source Structure

There are two directories in the MAME codebase that are relevant for writing a driver; the rest should be ignored unless one is porting MAME to a different platform - in which case, good luck. The two directories are:

• /src/mame - All MAME-specific subsystems (drivers, sound boards, video boards, etc.) go here.
• /src/devices - All core subsystems (CPU cores, audio chips, etc.) go here.

Under each of these are several subdirectories. Since there is some overlap, and since only some are relevant to writing a driver, only a subset of them will be described. They are:

• ./audio - Audio board drivers go here. in /src/mame only.
• ./cpu - CPU cores and disassemblers go here. In /src/devices only.
• ./includes - Headers for entire systems go here. In /src/mame only.
• ./layout - MAME artwork layouts go here. Only necessary for games that have unusual screen layouts.
• ./machine - Non-CPU IC and subsystem drivers go here. In both directories.
• ./sound - Sound IC drivers go here. In /src/devices only.
• ./video - Video board drivers go here in /src/mame, video IC drivers go here in /src/devices.

Driver Structure

Any driver in MAME typically consists of:

• A memory map for each CPU.
• A list of input devices and DIP switches.
• A MACHINE_CONFIG structure to define a PCB's hardware configuration.
• A ROM_START/ROM_END structure to define the ROM configuration for a game.
• A GAME() or GAMEX() macro to define an accessor for the game itself.
• Some form of video emulation, whether via a generic method or custom VIDEO_START/VIDEO_UPDATE functions.

Some drivers may involve other subsystems, such as timers and devices, but they are not strictly necessary in the most basic form of a driver.